Basketball Hair Band & Key Stand
Created 8 days ago
Description
What it's for
A desktop organizer that combines hair band storage with a key tray. Features an oversized basketball finial designed to stretch elastics slightly so they won't slip off, a central post for stacking, and a wide dished base engraved with court lines to catch keys, loose change, or lip balm.
Dimensions
- Overall height: ~158 mm
- Base tray diameter: 160 mm
- Tray depth: 12 mm
- Storage post diameter: 32 mm
- Basketball finial: 55 mm diameter
Print notes
- No supports required. The basketball grooves are modeled to trace the surface and keep the sphere as one solid piece.
- Print in standard PLA or PETG. The court line engravings on the base tray floor will show up best if printed with a slightly contrasting color swap on the top base layers.
Images
More like this
Explore more in Storage & Organization →
Shortened Center Divider
Tall walls snap when you bump them or get in the way when you're reaching for parts. This base now features a solid, half-height divider running down the center, keeping things separated without blocking your hand. Footprint: 4x6 inches (1/3 inch thick) Divider: 2.5 inches tall, 1/3 inch thick Printability: Prints flat on its base, no supports required.
Threaded Mask Coin Bank
A classic mask-shaped coin bank featuring an expanded flat base for stability and a threaded bottom plug for easy retrieval. \n\n Top Slot: 35mm wide for standard coins.\n Closure: 42mm coarse thread plug with built-in clearance.\n* Base: Flattened for secure desk placement.
WoodyVault — Crayon Carousel Enclosure
Meet the WoodyVault — a dedicated, print-in-place carousel enclosure for Stabilo Woody crayons. Designed with a short base and a tall lid, this layout ensures that even after heavy sharpening, the stubs remain easily accessible without getting lost at the bottom of a dark tube. The exterior features a chunky, wavy grip suited for small hands, while a heavy-duty threaded mechanism locks everything safely inside. Features 10-Slot Carousel: Custom-sized for the 15.6 mm girth of Woody crayons, arrayed in a circle to keep them upright and organized. Sharpener Core: The center features a 34x24 mm pocket tailor-made for the companion sharpener (32x22x37 mm). Easy-Access Base: The base holds only the bottom 42 mm of the crayons; the tall lid accommodates the rest of their 115 mm length. Tactile Grip: Both base and lid feature a continuous wavy ribbing that prevents slips and adds to the playful aesthetic. Print Notes Both parts are designed to print without supports. The lid sits flat on its top face with the female threads pointing upward. For optimal thread engagement, ensure your printer is well-calibrated; a 0.2 mm layer height works best for smooth screwing action. If you want the pens to be held tightly against the lid when closed, glue a thin disc of foam inside the roof of the lid.
Snap-On Double Bar Shelf
What it's for A wide, flat shelf designed to snap perfectly over a pair of parallel 15mm bars. Instead of resting loosely, the underside features six discrete snap-clips (three per bar) with a slightly pinched opening, allowing it to firmly grip the rails and resist sliding or tipping. Dimensions Overall Size: 220 mm wide × 280 mm deep. Bar Spacing: Fits bars spaced 210 mm apart from the very front edge of the front bar to the very back edge of the back bar. Bar Fit: 15.5 mm cavity with a 14.2 mm snap opening, tuned for standard 15 mm rods. Print notes The shelf is modeled "upside down." Print it flat on its top surface; the snap clips will point upwards and print cleanly without supports. PETG is highly recommended to give the clips the necessary flex to snap onto the bars without shattering.
Over-Board Marker Holster
A heavy-duty saddle bracket designed to hang over a standard 19.5mm whiteboard. The main U-shape slips over the board's top edge without fasteners, keeping the front face flush and out of the way. Features a single solid front extension bored out to house one standard 12mm dry erase marker vertically. Slip-fit saddle: Fits 19.5mm thick boards Marker drop: 12.5mm hole for clearance Thick walls: 5mm structural thickness for rigidity Flush construction: Fully merged geometry without seams
Cruzer Blade Sliding Enclosure
A thick-walled, two-part protective enclosure dimensioned specifically for the SanDisk Cruzer Blade. The assembly consists of a main retaining shell and a sliding captive lid. Fitment: Internal cavity measures 42.3 x 18.4 x 8.0 mm (allowing 0.5 mm clearance around the drive). Retention: Dual 0.4 mm internal Z-axis ribs provide friction fit against the drive housing. A solid rear wall prevents push-through. Mechanism: The left-side lid operates on dual 1.5 mm Y-axis rail grooves, featuring spherical detents at both ends of travel for locked open and closed states. Construction: 2.5 mm exterior walls in all directions for rigid PETG FDM printing. The top face includes a 1 mm recess for labelling and a subtracted diagonal chevron pattern.