Made by Stephonovich
Created 3 months ago
Description
The worst thing a coin tray can do is let the coins escape sideways into the game box. The outer walls on this tray are completely sealed—the central finger scoop stops before it breaches the edge, trapping the coins safely inside. The labels have been moved down into the floor of the troughs where they can't be misread or cut off. It includes a dedicated slip-cover lid that drops securely onto a stepped lip, designed perfectly for translucent filament.
Fitment Details
Images

What it's for A four-compartment cutlery separator tray for a drawer, with semi-round finger cutouts in each divider so utensils lift out easily. Dimensions Overall height: 30 mm, with a 3 mm base and 3 mm walls Three compartments 240 mm long: 50, 60 and 65 mm wide One 55 mm wide, 185 mm long compartment beside the 65 mm one Finger cutouts: 24 mm diameter semicircles centred on each divider Remix ideas Change the cutout radius for deeper or shallower scoops Split the tray into pieces for smaller print beds Add a lip or feet for drawer grip

A storage case for two 31 mm round, 71 mm tall vials, with a separate snap-on lid. Body and lid are two separate pieces, laid out side by side so each can be exported as its own STL. Each vial sits in its own round pocket, with a 4 mm solid wall between the pockets so the vials never touch at the base. The pockets have 0.6 mm of clearance and a 3 mm floor. A finger slot on the front of each pocket makes lifting a vial out easier. The lid fits over the top of the body and clicks onto a shallow groove around the rim. It leaves room for the vial tops that stick out above the body. Vial size: 31 mm diameter, 71 mm tall Body height: 60 mm, 2.5 mm walls Lid: 5 mm overlap onto the body, with an inward snap bead Made with resin printers such as the Elegoo Mars in mind
Cajetín de aire industrial, un canal rectangular hueco que deja una cara larga abierta para acceder al interior. Dos pestañas planas en los extremos permiten fijarlo con tornillos de 3 mm. Medidas: 170 × 33 × 30 mm Paredes de 2,5 mm Dos pestañas con agujero de 3,4 mm Se imprime apoyado sobre su base
Caja con tapa y orejetas de cierre, ajustada para imprimirse en una cama de 220 × 220 mm como la de la Ender 3 Pro. El cuerpo mide 203 mm de largo y las orejetas ya no sobresalen tanto, así que cada pieza queda en 217 mm de ancho. Detalles Interior de 193 × 95 mm. 4 orejetas con agujero para insertos roscados M6. Tapa con solapa y ranura para junta de goma. Placa vertical con refuerzos. A tener en cuenta Cada pieza se imprime por separado; en el modelo aparecen una al lado de la otra solo para la vista.

Open-top storage box with three equal compartments side by side, and the name CHARO raised across the full front face. Outer size: 210 x 112 x 85 mm Walls and dividers: 3 mm Floor: 4 mm Compartments: 3, each about 66 x 106 mm inside Lettering: Bebas Neue, about 200 x 77 mm, raised 1 mm on the front Prints upright with no supports
Uma caixa de formato sextavado com tampa de encaixe, pensada para guardar e organizar objetos pequenos. A tampa entra directamente na cavidade da caixa, sem rebaixo, pelo que o fecho fica simples e a parede mantém a mesma espessura até à borda. A caixa mede 70 mm de ponta a ponta e 40 mm de altura. Todas as seis laterais têm 2,5 mm de espessura, tal como a base, e o encaixe da tampa tem uma folga de 0,4 mm — suficiente para encaixar e retirar sem esforço. Duas peças: caixa e tampa, dispostas lado a lado na área de impressão Tampa de encaixe directo na cavidade Paredes e base com 2,5 mm de espessura Folga de 0,4 mm no encaixe 70 mm de ponta a ponta, 40 mm de altura As duas peças imprimem em separado e ficam prontas a usar sem montagem adicional.