Description
Une boîte de rangement simple reprenant la silhouette d'une tête de chat, conçue pour s'imprimer sans supports.
- Structure : Base creuse de 40 mm de haut avec des parois de 2 mm.
- Couvercle : S'emboîte via une lèvre interne, avec un jeu de 0.4 mm pour un ajustement facile.
- Impression : Le couvercle est déjà orienté face plate vers le plateau d'impression.
Images
More like this
Explore more in Storage & Organization →
Magnetic Enclosure Storage Box
A robust two-piece enclosure designed around magnetic closures and standard 100x145x30mm internal storage requirements. Remix Hooks Wall Thickness: Set to 6mm to ensure the 4mm corner magnets have plenty of structural meat on both sides. Registration Lip: The lid features an inset lip with 0.3mm clearance to keep the halves aligned—the magnets just pull it shut, they don't have to fight shear forces. Bottom Magnets: 7mm diameter cutouts are positioned underneath for docking or stacking. Adjust their X/Y offsets if you're matching a specific grid plate.
Standard 140x40 Gehäuse
Gehäuseunterteil mit Außenmaßen 140 x 40 x 25 mm und 3 mm Wandstärke. Passung: Der Deckel hat eine Innenlippe mit 0,5 mm Gesamtspielraum (0,25 mm pro Seite). Druck: Beide Teile liegen flach auf dem Druckbett (Deckel liegt auf der Oberseite) und benötigen keine Stützstrukturen. Kapazität: Innenraum misst effektiv 134 x 34 x 22 mm.
Ühe Otsaga Suletud Sahtlikarp
Sahtel kiilub kinni, sest pole kuskilt korralikult kinni võtta. See on suletud tagaseinaga lihtne kest, millel on nüüd sahtli ees korralik väike näpu-kõrgendus, et seda saaks mugavalt ja ilma küüsi murdmata välja tõmmata. Mahutavus: Täpselt 200 × 50 × 50 mm kasulikku ruumi. Seinad: 1.5 mm, prinditav ilma tugedeta. Liikumisruum: 0.5 mm lõtk külgedel tagab sujuva liugumise.
Friction-Fit Banana Shell
A rigid shell to keep fruit from getting crushed at the bottom of a bag. It splits into two halves that slide together with a friction fit. The geometry here is laid out specifically for support-free printing. By standing both halves vertically on flattened ends, the sweeping curves handle their own overhangs smoothly, and the friction lip prints as a straight upward continuation of the wall. Remixing the Shell Clearance: The lip has a 0.2mm radial gap against the recess (-1.5 vs -1.3 offset). If your printer under-extrudes and it's too loose, drop the recess offset to -1.4. Sizing: The max_rad is 24mm (48mm total width), which handles most standard grocery store bunches. Curve: The bend_radius is 160mm. Adjusting this tighter or wider will change the overall arc to match different fruit profiles.
BunkMate — Magnetic Rail Tray
A sturdy tray that hangs over a bunk bed rail, keeping bedtime essentials close at hand. Features Magnetic Base: Features eight fully-enclosed pockets sized for 0.7" x 0.12" magnets. Pause your print to drop them in, and they'll be sealed inside the floor forever. Wide Hook: Designed with a 34mm gap to easily clear thicker bed frames. Print-in-Place: No supports required; prints upright with the hook flat on the build plate.
RailGrab — Bed Box Tray
A heavy-duty side tray designed to hook right over a bunk bed rail. The interior basin is dimensioned to securely hold a 3.9-inch square box, wrapped by a full 1-inch retaining lip so nothing gets knocked over in the dark. Dimensions Inner Basin: 100 mm × 100 mm (perfect clearance for a 3.9" box). Lip Height: 1 inch (25.4 mm). Rail Hook: Fits standard 1-inch bed rails. Print notes With its 5 mm solid walls, this tray acts as a structural bracket. Best printed in PETG or ABS for long-term creep resistance, though PLA will do fine if it won't see direct sunlight. Depending on your orientation, supports are required for the hook overhang.