Drawer Sleeve Box With Mounting Pad
Created today
Description
Open-top rectangular sleeve, 86 x 52 x 127 mm, for a sliding drawer. Smooth interior, 1.6 mm floor, sides and front, 2.4 mm back wall. A raised 40 x 40 x 3 mm pad on the back carries two M3 nut traps.
Remix hooks
- Pad position: top edge sits 10 mm below the rim; pad is centered in X. Move or resize freely.
- Nut traps: 5.7 mm hex, 2.5 mm deep, 25 mm apart, with 3.4 mm blind holes behind them. Blind holes stop 0.8 mm short of the inside; thicken the back wall to go deeper.
- Edges: 3 mm vertical rounding, 6 mm 45° bottom chamfer (prints without supports).
- Drains: two 3 mm holes at X = ±20 mm.
- Pairs with a matching drawer 3 to 4 mm smaller in each direction.
Images
More like this
Explore more in Storage & Organization →
Gaveta Vertical Mini APH Pocket
Uma gaveta vertical de bolso, no espírito de um canivete suíço de primeiros socorros: o puxador largo no topo é também a tampa, e puxá-lo para cima faz a bandeja subir pelas guias, expondo os itens. Notas de projeto Corpo 86 × 52 × 127 mm, parede de 1,6 mm, dois drenos de ø 3 mm e furo de ø 4 mm para cordão. Bandeja 78 × 47 × 125 mm com tampa de 90 × 56 × 8 mm, recorte de dedo e divisórias. Clipe em J de 40 mm, 2,6 mm de espessura, impresso deitado. Pensado para PETG, sem suportes. Versão simplificada: dentes de retenção, rabo-de-andorinha, berço do oxímetro e batente liberável ainda não modelados.
Offenes Schreibtischregal mit Rampe
Schreibtische müllen immer von der Mitte her zu. Dieses Regal hebt den Kleinkram aus dem Weg und teilt die Fläche in der Mitte mit einer harten Rampe – links liegt das Fach tief für flaches Zeug, rechts hoch, damit darunter noch Platz für größeres Zubehör bleibt. Alles bleibt zugänglich und nichts verhakt sich. Eckdaten Spannweite: 450 mm Standfläche (Tiefe): 180 mm Höhe: 250 mm Druck: Wird flach auf der Rückseite liegend gedruckt und kommt komplett ohne Stützstrukturen aus.
Print-In-Place Advent Drawers
What it's for This is a fully assembled, print-in-place advent calendar and organizer. All 24 numbered drawers print inside the frame at once with no assembly required. It features integrated sliding tracks and built-in stops that prevent the drawers from being accidentally pulled out all the way. The design is oriented to print flat on its back. This allows the raised numbering and front pull-tabs to print perfectly on the top surface without any supports or bridging issues. Dimensions Overall Assembly: 169.5 mm wide × 169.5 mm high × 42 mm deep. Drawer Outer: 39.5 mm wide × 25.5 mm high × 39.5 mm deep. Drawer Inner (usable): 36.5 mm wide × 22.5 mm high × 36.5 mm deep (perfectly sized for standard 35 mm tealights or small treats). Clearances: 0.5 mm on all sides for smooth, bind-free sliding. Print notes Supports: None. The entire unit bridges perfectly on its own. Build Plate: Fits easily on a 180 × 180 mm bed (like the Bambu Lab A1 Mini). Clearance: Designed with extremely generous 0.5 mm gaps. Ensure your printer is not severely over-extruding to guarantee the drawers snap free immediately.
4-Compartment Kitchen Organizer
A small, straightforward drawer organizer divided into four compartments. One wide compartment runs the length of the tray for standard utensils, while the back half is split into three smaller bays for loose items. Dimensions Overall size: 150 mm long × 100 mm wide × 35 mm tall Wall thickness: 2 mm solid walls and dividers Long bay: ~146 mm × 47 mm (ideal for small spoons or forks) Small bays: ~47 mm × 47 mm each Print notes Designed to print flat on its base without supports. Generous corner radii keep things from getting stuck in the corners. PLA or PETG both work fine for drawer use.
Stash Box With Rolling Groove2
A stash box dimensioned precisely to 6" x 4" x 2". The lid features an inner alignment flange for a secure slip-fit when closed. When removed and inverted, the lid acts as a functional tray, featuring a solid raised block with a 130mm long V-notch engineered into the center to cradle rolling papers. Dimensions Overall Box Size: 152.4mm x 101.6mm x 50.8mm (6" x 4" x 2") V-Notch Length: 130mm (accommodates standard and king-size papers) Wall Thickness: 2mm throughout the base Print Notes Both parts are oriented flat on the build plate in their optimal printing positions. The V-notch prints perfectly without supports due to its self-supporting 45-degree overhang geometry. A 0.6mm clearance tolerance is built into the lid lip to allow smooth opening and closing right off the printer.
Cajón Corredizo Bahía 5.25"
Cajón que ocupa el lugar de una lectora de CD en la bahía de 5.25" de un tower. Frente liso y ciego, sin manija, y bandeja cuyas paredes llegan a 3/4 de la altura del frente. Puntos para modificar Frente: 148 × 42 × 4 mm. Ajustar si el bisel de tu gabinete difiere. Bandeja: 140 mm de ancho, 170 mm de profundidad, paredes de 2 mm y 31,5 mm de alto (0,75 × altura del frente). Rieles laterales: 2 × 8 mm, a 11 mm del piso. Se pueden cambiar por guías metálicas de bahía o agregar tolerancia. Variantes: divisores internos, tapa deslizante, apertura por empuje (push-latch) al no haber manija. Combina con: adaptadores de bahía 5.25" y organizadores de tornillos o cables.