HDX Tote Rack Bracket
Created 1 months ago
Remixed once
Description
A heavy-duty 90-degree corner bracket for 2x4 lumber frames, designed specifically to cradle the corners of HDX 27-gallon storage totes.
- 2-way 90-degree internal butt joint for standard 2x4 lumber
- Staggered 5.5 mm screw holes to prevent fastener collision
- Integrated 2-inch solid outer lip keeps totes from sliding off the frame
- Thickened outer corner pillar handles heavy vertical loads
Images
More like this
Explore more in Storage & Organization →
Mister Box Holder with Open Front
A wall-mounted cradle for a 2.25" x 4.75" x 2" mister box, sized with extra width clearance and a little extra depth so the box slots in easily but can't tip forward out of it. The front is open below a solid top rim so the buttons stay reachable, and a low lip along the bottom front edge holds the box in. Two identical ears on the back face carry countersunk screw holes for mounting to the side of furniture. Full 4.75" (120.65 mm) wall height 10 mm width gap, 3 mm depth gap Cord notch in the left rim only, 15 mm wide, centered 1.5" from the inside back wall, open at the top Window cutouts on the sides to save filament Two back ears with countersunk screw holes
Slim Tiered Playing Card Rack
What it's for A sleek, tiered playing card holder designed to display up to five rows of cards. It features 15-degree angled blind grooves to securely pitch cards back at a comfortable viewing angle, with progressively taller tiers ensuring full visibility for the rear rows. Dimensions Overall footprint: 220 mm wide × 85 mm deep Height: 75 mm (at the rear tier) Tiers: 5 rows, each stepping up by 15 mm Internal: Fully hollowed with an enclosed internal void, featuring 4 mm robust walls, a continuous solid base, and internal bridging ribs to print cleanly while conserving filament. Print notes Designed to be printed flat on its base without external supports. The internal structure consists of safely bridged spans (~39 mm each) supported by internal ribs, meaning you shouldn't need infill to support the roof layers.
65mm Wood Hook Phone Bracket
A heavy-duty hook bracket to suspend a phone over a 60mm wooden beam or headboard. The main channel is sized at 65mm for clearance, dropping a device tray down 65mm from the top edge. Fitment: 65mm interior gap clears standard 60mm stock. Tray Specs: 16mm deep with a 3mm inward tilt to keep the device seated against the backrest. Width: 50mm overall extrusion. Printability: Designed to be printed flat on its side. Requires no supports.
Screw-Through Dowel Shelf Bracket
A two-part wall bracket for holding a 13 mm wooden dowel, intended as a filament spool shelf. A narrow wall plate carries a ledge that takes the vertical load, and a separate flat-printed arm rests on that ledge. One screw passes through the arm's back flange and the wall plate into the wall, locking the two parts together. The screw head sits in a recess in the arm. Wall plate: 24 mm wide, 84 mm tall, with a ribbed ledge under the arm Arm: 12 mm thick, printed on its side with no supports Dowel hole: 13.6 mm, 150 mm out from the wall plate Fixing: one screw near the top, shared by both parts Print two sets for a pair of brackets
Gaveta Vertical Mini APH Pocket
Uma gaveta vertical de bolso, no espírito de um canivete suíço de primeiros socorros: o puxador largo no topo é também a tampa, e puxá-lo para cima faz a bandeja subir pelas guias, expondo os itens. Notas de projeto Corpo 86 × 52 × 127 mm, parede de 1,6 mm, dois drenos de ø 3 mm e furo de ø 4 mm para cordão. Bandeja 78 × 47 × 125 mm com tampa de 90 × 56 × 8 mm, recorte de dedo e divisórias. Clipe em J de 40 mm, 2,6 mm de espessura, impresso deitado. Pensado para PETG, sem suportes. Versão simplificada: dentes de retenção, rabo-de-andorinha, berço do oxímetro e batente liberável ainda não modelados.
Print-In-Place Advent Drawers
What it's for This is a fully assembled, print-in-place advent calendar and organizer. All 24 numbered drawers print inside the frame at once with no assembly required. It features integrated sliding tracks and built-in stops that prevent the drawers from being accidentally pulled out all the way. The design is oriented to print flat on its back. This allows the raised numbering and front pull-tabs to print perfectly on the top surface without any supports or bridging issues. Dimensions Overall Assembly: 169.5 mm wide × 169.5 mm high × 42 mm deep. Drawer Outer: 39.5 mm wide × 25.5 mm high × 39.5 mm deep. Drawer Inner (usable): 36.5 mm wide × 22.5 mm high × 36.5 mm deep (perfectly sized for standard 35 mm tealights or small treats). Clearances: 0.5 mm on all sides for smooth, bind-free sliding. Print notes Supports: None. The entire unit bridges perfectly on its own. Build Plate: Fits easily on a 180 × 180 mm bed (like the Bambu Lab A1 Mini). Clearance: Designed with extremely generous 0.5 mm gaps. Ensure your printer is not severely over-extruding to guarantee the drawers snap free immediately.