Litteä lääkekotelo
Created today
Description
Tämä ohut suojakotelo on suunniteltu pelkkien läpipainolevyjen kuljettamiseen. Se pitää lääkkeet ehjinä taskussa tai laukussa ilman alkuperäisen pahvipakkauksen viemää tilaa.
Ominaisuuksia:
- Matalampi profiili, joka säästää tilaa
- Kitkasovitteinen kansi pitää kotelon kiinni
- Pyöristetyt kulmat tekevät siitä taskuystävällisen
Images
More like this
Explore more in Storage & Organization →
AutoBrush Head Travel Case
A protective travel shell explicitly shaped to match the AutoBrush U-shaped head without excess bulk. There's nothing more frustrating than opening your travel bag to find your toothbrush head snagged on something and exposed to the bottom of your wash bag. This clamshell encloses the head securely with mechanical latches tucked firmly into the straight side edges so they don't catch on anything. Fit & Print Details Hinge: Integrates a full-length structural hinge pin printed separately for maximum mechanical strength. Latch Mechanics: Dual snap latches cross the mating seam, biting tightly to keep the case closed when dropped. Support Requirement: Flat base layout means this case prints reliably with no supports and zero overhang spaghetti.
Teardrop Sticker Dispenser
A compact, teardrop-shaped dispenser designed specifically for sticker rolls. The two halves snap together smoothly to fully enclose the roll, protecting the stickers and keeping the tape aligned. Design Details Capacity: Fits rolls up to 95mm outer diameter and 16mm width. Interlock: 5mm deep stepped lip with a 0.3mm radial clearance for a secure, tool-free friction fit right off the bed. Walls: 4mm thick for rigidity, stepping down seamlessly into the inner cavity. Exit: A simple 18mm front slot lets the tape pull freely without snagging. Both halves print flat on their outer faces without supports. If you find the friction fit too tight or too loose on your printer, the clearance parameter is the first thing to adjust.
Teardrop Sticker Roll Dispenser
Un boîtier distributeur pour rouleaux de gommettes de 13 mm (mandrin de 76 mm). La forme en goutte épouse le rouleau et guide la bande vers une ouverture fine. Conception en deux pièces : Un corps principal et un couvercle qui s'emboîte par simple friction. Sortie de précision : Une fente étroite de 2 mm avec des dents intégrées pour déchirer la bande proprement. Impression optimisée : Conçu pour s'imprimer à plat sans aucun support.
Sentinel Deck Vault
A robust, two-piece deck box built for transport and easy access. Designed to hold 100 double-sleeved 63x88mm trading cards, it features a snug snap-fit lid to prevent spills in your bag. Secure Closure: Friction-fit lip with spherical snap detents. Easy Access: Deep thumb cutouts on the front and back let you grab the whole deck at once. Sturdy Build: Thick 2.4mm outer walls for solid protection.
Finn's Stash Chest
A small, sturdy stash box modeled after a classic domed chest, personalized with "Finn" on the front. Features: Dimensions: 80mm wide by 50mm deep; stands 51mm tall when closed. Fit: Designed as two separate pieces. The base features a 4mm registration lip with 0.4mm clearance to keep the lid securely in place without hinges. Printability: Both parts print flat on the bed with no supports required. Thick walls give the base a satisfying, substantial feel.
Mechanical 40-Quarter Dispenser
A fully mechanical, gravity-fed coin magazine tailored for standard U.S. quarters. Designed to slip into a pool cue bag, it stores a full $10 roll vertically and cleanly dispenses exactly $1 (four quarters) per cycle into the palm of the hand. The mechanism relies on a two-stage sliding escapement. In the resting position, the bottom four coins sit perfectly flush inside the 7.2mm-thick slider pocket. When the thumb tab is pulled outward, a chamfered ramp on the top trailing edge of the pocket catches the fifth quarter and guides it smoothly onto the solid tail of the slider, suspending the rest of the stack. Once the pocket aligns with the drop chute at full extension, the isolated four quarters fall through. A captive printed pin mounted from the base runs in an internal track on the slider, acting as a hard travel limit for both the pull and return strokes. Remix & Tuning Hooks Threaded Cap: The top of the magazine tube now features a coarse 4mm-pitch thread, securing the cap firmly for travel. Magazine Height: The tube is dimensioned at 75mm to easily clear forty 1.75mm-thick quarters. Snip the cylinder height in the code to make a shorter 20-coin version. Coin Bore: Currently 25.2mm to allow 0.47mm radial clearance for a 24.26mm quarter. Tweak this offset for other currencies or tokens. Slider Thickness: The exact 7.2mm thickness dictates the dispense count (four coins). Scaling this Z-dimension alters how many coins drop per pull. Tolerances: The slider track relies on a 28.5mm bridge in the main body. If your printer sags on bridges, the slider can be sanded lightly, or the track height (7.6mm) can be nudged up.