Open-Frame Armored Commander Deck Box
Created today
Description
A Commander deck box wearing skeletal corner armor: each of the eight TPU bumpers is cut into an open frame, so only a rim hugging the box's edges remains, like the corner guards on a vintage steamer trunk.
The box holds around 100 sleeved cards, with a lift-off lid and a magnetic swap-in emblem on the front.
- Window cuts: a rounded rectangle at 80% of each face (top, front, side) is cut through the bumpers.
- Bumpers: all eight corners are guarded from three directions, with scooped corners.
- Emblem: a 32 mm tile held by two 6 x 2 mm magnets.
- Lid: deep cap with a chamfered top edge and an inner lip.
Images
More like this
Explore more in Storage & Organization →
Cat Head Box
Une boîte de rangement simple reprenant la silhouette d'une tête de chat, conçue pour s'imprimer sans supports. Structure : Base creuse de 40 mm de haut avec des parois de 2 mm. Couvercle : S'emboîte via une lèvre interne, avec un jeu de 0.4 mm pour un ajustement facile. Impression : Le couvercle est déjà orienté face plate vers le plateau d'impression.
Magnetic Enclosure Storage Box
A robust two-piece enclosure designed around magnetic closures and standard 100x145x30mm internal storage requirements. Remix Hooks Wall Thickness: Set to 6mm to ensure the 4mm corner magnets have plenty of structural meat on both sides. Registration Lip: The lid features an inset lip with 0.3mm clearance to keep the halves aligned—the magnets just pull it shut, they don't have to fight shear forces. Bottom Magnets: 7mm diameter cutouts are positioned underneath for docking or stacking. Adjust their X/Y offsets if you're matching a specific grid plate.
Vented Equipment Enclosure Box
What it's for A functional electronics or equipment enclosure featuring an integrated hinged lid, snap latch, and generous ventilation slots. Designed to print easily with the lid flat on the bed alongside the main body. Dimensions Internal capacity: 200 x 200 mm base, 60 mm deep inside Floor: 5 mm thick solid base for structural rigidity Cutouts: A 30 mm circular port on the left wall, and a 12x6 mm rectangular port on the back wall by the hinges. Cooling: Vertical slot vents on the front, left, and back panels. Assembly Once printed, mate the hinge knuckles of the lid to the base. Slide a piece of raw 1.75mm or 3mm filament (or a standard M3 bolt) straight through the hinge line to join them.
Open-Front Can Carrier1
Standard 355ml cans pile up in the fridge and roll around when you try to stack them. This is an open-front upright shelf carrier that holds six cans — three wide, two high — securely in their own cradles. The handle mounts at the top front and swings entirely clear of the loading area. When dropped back, the grip sits perfectly flush with the back wall of the crate, staying completely out of your way until it's time to lift it. Fit Details Capacity: 6x Standard 355ml cans (66.5mm diameter) Clearance: Cans slide in vertically from the open front Assembly: The handle prints flat. Just flex the arms outward slightly to snap the 9.5mm pegs into the crate's pivot holes.
Standard 140x40 Gehäuse
Gehäuseunterteil mit Außenmaßen 140 x 40 x 25 mm und 3 mm Wandstärke. Passung: Der Deckel hat eine Innenlippe mit 0,5 mm Gesamtspielraum (0,25 mm pro Seite). Druck: Beide Teile liegen flach auf dem Druckbett (Deckel liegt auf der Oberseite) und benötigen keine Stützstrukturen. Kapazität: Innenraum misst effektiv 134 x 34 x 22 mm.
Filmdosen-Schuh 36mm
Ein flacher, passgenauer TPU-Untersetzer (Schuh), der das Wackeln einer hohen 36-mm-Filmdose verhindert. Innendurchmesser: 36,2 mm (für strammen Sitz in flexiblem Material) Gesamthöhe: 5,0 mm Bodenstärke: 1,6 mm Wandstärke: 1,65 mm Besonderheiten: Leicht abgerundete Außenkanten und eine 0,5 mm Fase an der Innenkante zum leichteren Einsetzen der Dose.