Press-Fit Expansion Pin
Created today
Description
This stepped pin features a precise cross-cut relief down the upper half of its shaft, turning the tapered head into an active press-fit expansion mechanism. The rigid base provides a solid stop, while the flexible upper quads allow it to securely bite into the inside of a matching tube.
Design Features
- Flanged Base: 12mm outer diameter stop prevents over-insertion.
- Relief Cut: 2mm wide cross slot allows inward flex during seating.
- Tapered Catch: Angled head eases insertion while maintaining outward pressure.
Photos
Technical views
More like this
Explore more in Workshop & Tools →
Furo 3.2mm Rebite Snap-Fit
Rebite de pressão (snap-fit) projetado especificamente para união de chapas finas, otimizado para impressão 3D em PLA. Especificações Críticas Furo de Montagem: 3.20 mm Espessura Útil (Aperto): 5.30 mm Diâmetro da Haste: 3.05 mm Diâmetro da Cabeça: 6.00 mm (com 1.30 mm de espessura) O design foi ajustado para resistir às tensões da impressão FDM com bico de 0.4 mm. O rasgo central desce além da cabeça da trava, dando 3.0 mm completos de alavanca para as abas (que têm 0.65 mm de parede) fletirem sem estourar. A base da cabeça leva um pequeno chanfro de 0.3 mm para compensar o pé de elefante da primeira camada e garantir que ele assente perfeitamente plano contra o painel. A face de retenção tem uma inclinação suave de 80 graus para tracionar levemente o conjunto de 5.40 mm.
M18x2.5 Socket Cap & Nut
An M18 x 30 socket head cap screw with a matching hex nut, designed for direct 3D printing. The bolt features a standard 2.5mm coarse pitch and a 14mm hex drive recess in the head. It prints head-down to avoid overhang issues. Fitment Notes Thread: M18x2.5 (Coarse) Drive: 14mm Allen / Hex Key Nut Wrench Size: 27mm Clearance: 0.2mm on the nut threads for a tighter fit. Ensure your printer's flow rate and dimensional accuracy are well-calibrated, or the threads may bind.
1.95" x 0.195" Chamfered Sleeve
A simple sleeve spacer or bushing. Features: Outer Diameter: 1.95 inches Inner Bore: 0.195 inches (through-hole) Overall Height: 2.5 inches Internal chamfers on both ends of the bore to ease insertion. Check your shaft diameter and required clearance before running off a print.
Chamfered Heavy Duty Spacer
A 2.5-inch tall solid cylinder spacer with a 1.5-inch outer diameter and a 0.38-inch inner diameter. The inner hole features 1mm chamfered edges at the top and bottom to guide inserted parts and reduce edge stress. Outer Diameter: 1.5" (38.1 mm) Inner Diameter: 0.38" (9.65 mm) Overall Height: 2.5" (63.5 mm) Edge Treatment: 1mm ID chamfers
Sockenlineal für Schuhgrößen
Ein einfaches Messwerkzeug, um während des Strickens die Fußlänge und Schuhgröße einer Socke zu bestimmen, ohne das Strickstück ständig anprobieren zu müssen. Das Lineal wird direkt in die Spitze geschoben. Die eingravierten Skalen in Zentimetern und EU-Größen nutzen sich nicht ab und gleiten glatt am Garn vorbei. Maße und Parameter Länge: 300 mm Messstrecke. Breite: 50 mm, passend für gängige Sockenspitzen. Stärke: 2,4 mm (steif, aber noch nicht sperrig). Skalen: CM oben, EU-Größen unten, nach außen gerückt für bessere Ablesbarkeit.
Dust Extractor Static Turbine
Nothing stops a project faster than trying to perfectly align a separate impeller core inside a printed housing while the glue dries. This design builds the stator directly into the pipeline — a single solid print where the central shaft is locked to the walls via mid-body struts. The blades are pitched to guide airflow and trimmed completely flush with the adapter's inner taper, so there's no risk of them breaching the outer shell. Dimensions & Setup Total Height: 140 mm Shaft Diameter: 12 mm Blade Setup: 6 angled blades at the 4-inch base, 6 more at the 2-inch top. Mounting: 3 stationary support struts across the transition zone. Printing Note: Built as a single solid part (stator). If used for dust extraction, printing in PETG is recommended to handle the abrasion from chips.