Sockenlineal für Schuhgrößen
Created today
Description
Ein einfaches Messwerkzeug, um während des Strickens die Fußlänge und Schuhgröße einer Socke zu bestimmen, ohne das Strickstück ständig anprobieren zu müssen. Das Lineal wird direkt in die Spitze geschoben. Die eingravierten Skalen in Zentimetern und EU-Größen nutzen sich nicht ab und gleiten glatt am Garn vorbei.
Maße und Parameter
- Länge: 300 mm Messstrecke.
- Breite: 50 mm, passend für gängige Sockenspitzen.
- Stärke: 2,4 mm (steif, aber noch nicht sperrig).
- Skalen: CM oben, EU-Größen unten, nach außen gerückt für bessere Ablesbarkeit.
Photos
Technical views
More like this
Explore more in Workshop & Tools →
Chamfered Heavy Duty Spacer
A 2.5-inch tall solid cylinder spacer with a 1.5-inch outer diameter and a 0.38-inch inner diameter. The inner hole features 1mm chamfered edges at the top and bottom to guide inserted parts and reduce edge stress. Outer Diameter: 1.5" (38.1 mm) Inner Diameter: 0.38" (9.65 mm) Overall Height: 2.5" (63.5 mm) Edge Treatment: 1mm ID chamfers
Dust Extractor Static Turbine
Nothing stops a project faster than trying to perfectly align a separate impeller core inside a printed housing while the glue dries. This design builds the stator directly into the pipeline — a single solid print where the central shaft is locked to the walls via mid-body struts. The blades are pitched to guide airflow and trimmed completely flush with the adapter's inner taper, so there's no risk of them breaching the outer shell. Dimensions & Setup Total Height: 140 mm Shaft Diameter: 12 mm Blade Setup: 6 angled blades at the 4-inch base, 6 more at the 2-inch top. Mounting: 3 stationary support struts across the transition zone. Printing Note: Built as a single solid part (stator). If used for dust extraction, printing in PETG is recommended to handle the abrasion from chips.
Low Profile Probe Rack
A bulky wall mount that catches on sleeves and knocks things off the bench is exactly what we don't want. Chopping the back plate down to a stubby profile gets the plastic out of the way while keeping the rack mounted firmly against the wall. Fit Details Capacity: 8 scope probes Grip Clearance: 10mm holes Mounting: Swapped to smaller M3 countersunk holes to fit the shorter 12mm back plate
8-Probe Slim Wall Rack
Tired of oscilloscope probes sliding off the bench and getting crushed by heavy gear? This wall-mounted rack gets them up and out of the way. It holds eight probes cleanly, keeping the cables untangled and the tips safe. Dimensions & Details Capacity: 8 slots (15mm diameter cutouts, 5.5mm entry slots) Overall Size: 220mm wide x 53mm deep x 17.5mm high Mounting: Three countersunk screw holes (4.5mm shaft, 7.5mm head) Printing: Prints flat on its base, no supports required. Thinned down to save material and print time.
Brymen BM789 Multimeter Desk Stand
A dedicated desk stand for the Brymen BM789 multimeter. The stand pitches the meter back at 30 degrees from vertical for bench readability. Crucially, the BM789 routes its test leads from the bottom face—so the lower lip and base plate feature a 65mm-wide central clearance channel. The meter sits on the outer shelves of the tray while the leads drop straight through to the desk. Fitment checks Width: Internal clearance is 95mm (BM789 in holster is ~89mm wide). Depth: Internal tray depth is 55mm (BM789 in holster is ~51mm). Jacks: The 65mm U-channel easily clears the standard 4-jack spread. Compatibility: Will fit other meters with bottom jacks provided their holstered footprint is under 95x55mm.
Metal Band Multimeter Stand
A spiky, symmetrical desk stand built for holding a multimeter, styled like an illegible gothic metal band logo. Features jagged thorny branches reaching outward and scalloped batwing support fins. Angled Rest: Leans back at 25 degrees for bench visibility. Cable Clearance: A generous 45mm cutout in the shelf allows test leads to stay plugged in while docked. Flat Base: The entire assembly is sliced flat at the bottom for a stable desk footprint.