Swivel Tooth Stash Box
Created today
Description
A fluted cylinder stash box featuring a swing-open lid and a custom dental logo on top. The lid snaps securely into place with a concealed locking pin, making it perfect for holding small desktop items.
- Swivel Action: Swings smoothly and clicks closed via a small detent on the rim.
- Fluted Base: Deep vertical cuts around the cylinder provide plenty of grip.
- Raised Engraving: A custom tooth outline frames "United Smiles Dentistry" cleanly on the lid.
Images
More like this
Explore more in Storage & Organization →
Stash Box With Rolling Groove2
A stash box dimensioned precisely to 6" x 4" x 2". The lid features an inner alignment flange for a secure slip-fit when closed. When removed and inverted, the lid acts as a functional tray, featuring a solid raised block with a 130mm long V-notch engineered into the center to cradle rolling papers. Dimensions Overall Box Size: 152.4mm x 101.6mm x 50.8mm (6" x 4" x 2") V-Notch Length: 130mm (accommodates standard and king-size papers) Wall Thickness: 2mm throughout the base Print Notes Both parts are oriented flat on the build plate in their optimal printing positions. The V-notch prints perfectly without supports due to its self-supporting 45-degree overhang geometry. A 0.6mm clearance tolerance is built into the lid lip to allow smooth opening and closing right off the printer.
3D Cube IQ Puzzle
A miniature, low-filament version of the classic Soma cube puzzle. The set includes seven distinct pieces that assemble into a solid 3x3x3 cube. The puzzle comes with a small square container to store the pieces or to build the solution directly inside. Print Details Pieces: 7 standard Soma cube fragments Container: 33.5mm outer footprint Supports: None required. All puzzle pieces are oriented to print flat against the build plate. Solvability: Mathematically proven to have exactly 240 valid solutions.
4-Compartment Kitchen Organizer
A small, straightforward drawer organizer divided into four compartments. One wide compartment runs the length of the tray for standard utensils, while the back half is split into three smaller bays for loose items. Dimensions Overall size: 150 mm long × 100 mm wide × 35 mm tall Wall thickness: 2 mm solid walls and dividers Long bay: ~146 mm × 47 mm (ideal for small spoons or forks) Small bays: ~47 mm × 47 mm each Print notes Designed to print flat on its base without supports. Generous corner radii keep things from getting stuck in the corners. PLA or PETG both work fine for drawer use.
130mm Tubeless Repair Kit Case
A rigid three-piece storage case designed for tubeless tyre repair kits. The base features an inset lip that locks the lid in place, secured by a snap-fit C-clamp latch that mounts to an integrated front axle. Dimensions: 130 mm x 85 mm x 35 mm combined. Wall Thickness: 2.5 mm throughout. Clearances: 0.3 mm on the lid slip-fit, 0.5 mm width clearance for the latch. Print Orientation: All three pieces are laid flat on the bed. No supports required.
Open-Frame Armored Commander Deck Box
A Commander deck box wearing skeletal corner armor: each of the eight TPU bumpers is cut into an open frame, so only a rim hugging the box's edges remains, like the corner guards on a vintage steamer trunk. The box holds around 100 sleeved cards, with a lift-off lid and a magnetic swap-in emblem on the front. Window cuts: a rounded rectangle at 80% of each face (top, front, side) is cut through the bumpers. Bumpers: all eight corners are guarded from three directions, with scooped corners. Emblem: a 32 mm tile held by two 6 x 2 mm magnets. Lid: deep cap with a chamfered top edge and an inner lip.
Vented Equipment Enclosure Box
What it's for A functional electronics or equipment enclosure featuring an integrated hinged lid, snap latch, and generous ventilation slots. Designed to print easily with the lid flat on the bed alongside the main body. Dimensions Internal capacity: 200 x 200 mm base, 60 mm deep inside Floor: 5 mm thick solid base for structural rigidity Cutouts: A 30 mm circular port on the left wall, and a 12x6 mm rectangular port on the back wall by the hinges. Cooling: Vertical slot vents on the front, left, and back panels. Assembly Once printed, mate the hinge knuckles of the lid to the base. Slide a piece of raw 1.75mm or 3mm filament (or a standard M3 bolt) straight through the hinge line to join them.