Made by AlderMarker
Created 1 months ago
Description
A sturdy tip box designed to print in one piece with no supports or assembly required. It features a fully articulated, print-in-place hinge connecting the lid directly to the main body. The front incorporates deeply debossed stencil lettering, creating a hollowed-out window effect, while the exterior is textured with an interlocking scalloped "fish scale" pattern to add grip and visual interest.
Designed to print in its default orientation (lid standing straight up). Use a 0.2mm layer height or smaller for the hinge gap to function correctly. The floating inner islands of the text will not be supported and are designed to drop away cleanly.
Images

Open-top storage box with three equal compartments side by side, and the name CHARO raised across the full front face. Outer size: 210 x 112 x 85 mm Walls and dividers: 3 mm Floor: 4 mm Compartments: 3, each about 66 x 106 mm inside Lettering: Bebas Neue, about 200 x 77 mm, raised 1 mm on the front Prints upright with no supports
What it's for A plain open-topped square box with a closed floor, sized to hold small parts, tools, or loose odds and ends on a desk or workbench. The straight sides and flat base keep it stable on the print plate and easy to drop things into from above. Dimensions Outer footprint: 75 × 75 mm Height: 25 mm Wall thickness: 3 mm Floor thickness: 3 mm Top: fully open, no lid Print notes Prints upright as it sits, with no supports needed for the vertical walls. A 3 mm wall and floor hold up well in PLA or PETG at a standard layer height; thicker walls take a slightly wider nozzle or more perimeters comfortably. Remix ideas Add a lid or a stacking lip so several boxes can sit on top of one another. Round the outer corners for a softer look and less sharp handling. Divide the interior with a grid to sort small hardware.
Loose items slide around in a drawer, and a floorless box with a divider keeps them in place. This one is a rectangular frame with no floor and a full-height wall across the middle. Key numbers Outer size: 184 x 93.33 x 115 mm (height) Wall thickness: 2.4 mm Divider: 2.4 mm, full height, at the middle of the 184 mm length Three boxes side by side fill a 280 mm drawer depth Print: open end up, no supports needed, fits beds of 210 mm or larger
Cajetín de aire industrial, un canal rectangular hueco que deja una cara larga abierta para acceder al interior. Dos pestañas planas en los extremos permiten fijarlo con tornillos de 3 mm. Medidas: 170 × 33 × 30 mm Paredes de 2,5 mm Dos pestañas con agujero de 3,4 mm Se imprime apoyado sobre su base
Caja con tapa y orejetas de cierre, ajustada para imprimirse en una cama de 220 × 220 mm como la de la Ender 3 Pro. El cuerpo mide 203 mm de largo y las orejetas ya no sobresalen tanto, así que cada pieza queda en 217 mm de ancho. Detalles Interior de 193 × 95 mm. 4 orejetas con agujero para insertos roscados M6. Tapa con solapa y ranura para junta de goma. Placa vertical con refuerzos. A tener en cuenta Cada pieza se imprime por separado; en el modelo aparecen una al lado de la otra solo para la vista.
Uma caixa de formato sextavado com tampa de encaixe, pensada para guardar e organizar objetos pequenos. A tampa entra directamente na cavidade da caixa, sem rebaixo, pelo que o fecho fica simples e a parede mantém a mesma espessura até à borda. A caixa mede 70 mm de ponta a ponta e 40 mm de altura. Todas as seis laterais têm 2,5 mm de espessura, tal como a base, e o encaixe da tampa tem uma folga de 0,4 mm — suficiente para encaixar e retirar sem esforço. Duas peças: caixa e tampa, dispostas lado a lado na área de impressão Tampa de encaixe directo na cavidade Paredes e base com 2,5 mm de espessura Folga de 0,4 mm no encaixe 70 mm de ponta a ponta, 40 mm de altura As duas peças imprimem em separado e ficam prontas a usar sem montagem adicional.