سینی ماژولهای الکترونیکی و شبکه
Created today
Description
این سینی برای نگهداری و سازماندهی یکپارچهی چند ماژول الکترونیکی طراحی شده است.
ویژگیهای قطعه:
- پایه TP4056: با گیرههای فشاری و دیواره پشتی برای جلوگیری از حرکت موقع وصل کردن کابل.
- پایه ESP32-C3 Super Mini: نصب شده در راستای عرضی، همسطح با لبههای سینی برای دسترسی راحت به پورت.
- پایه ماژول کوچک: فضایی برای یک ماژول ۹ در ۱۶ میلیمتری.
- پایه پورت شبکه (Ethernet): در انتهای سینی با ۴ میلیمتر بیرونزدگی، همراه با دیواره پشتی ضخیم (۱۰ میلیمتر) برای تحمل فشار کابل.
- گیرههای تمام پایهها دارای طراحی چفتشونده (Snap-fit) با گوشههای گرد هستند تا به بردها آسیبی نرسد.
Images
More like this
Explore more in Storage & Organization →
30mm Print-in-Place Hinged Box
A compact, support-free storage case designed to print as a single assembled unit. The clamshell design lies flat on the build plate, using internal conical pins to create a working 180-degree hinge straight off the printer. Dimensions: 30mm square footprint when closed; 20mm total height. Mechanism: Integrated conical barrel hinge with 0.4mm clearances. Closure: Friction-fit horizontal snap ridge on the front lip. Print Setup: Requires no supports. Best printed in PLA or PETG with standard 0.2mm layer heights.
Cylindrical Snap-Fit Container
A sturdy, minimalist cylindrical container with a flush snap-fit lid. Designed to hold small components, screws, or bits, keeping them securely enclosed. Features Overall Dimensions: 50mm outer diameter, 20mm internal depth. Snap-Fit Mechanism: Features a continuous locking ridge and corresponding groove that engages firmly with a satisfying click. Flush Design: The lid sits completely flush with the outside walls when closed. Print-Ready: The lid is provided in an upside-down orientation, allowing both pieces to print cleanly without any supports.
Coastal Silhouette Key Rack
Eine flache, supportfrei druckbare Schlüsselablage mit maritimer Strandsilhouette. Das kompakte, zweidimensionale Design vereint Funktionalität mit dekorativem Aussehen und ist dank flacher Rückseite ideal zur Montage mit doppelseitigem Klebeband. Silhouette: Ein Segelboot und zwei Palmen formen eine durchgehende Landschaft. Haken: Vier integrierte Haken, im 45-Grad-Winkel angesetzt, erlauben den sicheren Halt von Schlüsseln und problemlosen, liegenden Druck. Montage: 2 mm flaches Basis-Profil mit absolut glatter Rückseite zum einfachen Aufkleben an Türen oder Wänden.
Hinged Lockbox with Access Port
A heavy-duty electronics or utility enclosure featuring a hinged lid and a front-facing access port. Designed to be printed entirely without supports, the lid is oriented flat on the build plate and attaches to the main body via a simple filament-pin hinge. A pair of aligned tabs at the front accommodate a standard small padlock or zip tie for securing the contents. Specifications Overall Dimensions: 150mm (W) x 80mm (D) x 100mm (H) Wall Thickness: 3mm Access Port: 45mm diameter, positioned with a 20mm clearance from the inner floor. Hardware Required: 1.75mm filament scrap or 2mm metal rod for the hinge pins; small padlock for the front tabs.
200mm Square 3-Compartment Toolbox
A 200mm square storage box equipped with three equal front-to-back compartments, accompanied by a drop-on lid. The lid has a built-in 0.5mm clearance margin to ensure it slips onto the base easily without jamming, ideal for standard or Hyper PLA printing profiles. What it's for Sorting and protecting mid-sized tools, hardware, or craft supplies. The three wide compartments keep items from shuffling around while maintaining a clean, accessible layout. Dimensions Base outer: 200 x 200 x 50 mm Lid outer: 205 x 205 x 12 mm Compartments: Three slots, each 64 x 196 x 48 mm internally Clearance: 0.5 mm all around the lid fit Wall thickness: 2 mm universally Print notes The base and lid are positioned side-by-side. On a standard 220x220mm print bed, you will need to split the parts in your slicer and run them as two separate print jobs. No supports are required.
Wall mount TV remote bracket for narrow remotes
A sleek, vertical cradle designed to keep the television remote permanently anchored next to the light switch. Sized specifically for a 160×50×22mm controller, the sleeve wraps the remote securely while leaving a generous front window to let you grab it without scraping your knuckles against the wall. Design Notes Friction Fit: Built with a 51×24mm interior channel to give a 50×22mm remote a smooth glide without rattling. Access Window: The front face is cut wide open, leaving a 10mm lip around the bottom and sides to lock the remote in place while keeping the buttons visible. Flush Mounting: Features two countersunk M3 screw holes spaced vertically, ensuring the screw heads sit dead-flush against the back wall and won't scratch your plastic.