Wall mount TV remote bracket for narrow remotes
Created 1 months ago
Remixed once
Description
A sleek, vertical cradle designed to keep the television remote permanently anchored next to the light switch. Sized specifically for a 160×50×22mm controller, the sleeve wraps the remote securely while leaving a generous front window to let you grab it without scraping your knuckles against the wall.
Design Notes
- Friction Fit: Built with a 51×24mm interior channel to give a 50×22mm remote a smooth glide without rattling.
- Access Window: The front face is cut wide open, leaving a 10mm lip around the bottom and sides to lock the remote in place while keeping the buttons visible.
- Flush Mounting: Features two countersunk M3 screw holes spaced vertically, ensuring the screw heads sit dead-flush against the back wall and won't scratch your plastic.
Photos
Technical views
More like this
Explore more in Storage & Organization →
Wall-Mounted 5-Hook Key Rack
What it's for A wall-mounted entryway organizer featuring five cylindrical hooks and a top storage ledge. The hooks are pitched upward at a 30-degree angle from the vertical to securely hold keyrings without slipping, and are spaced 35 mm apart to prevent adjacent lanyards or keys from tangling. The top ledge is 35 mm deep, finished with a 2 mm retaining lip, providing a resting place for sunglasses, outgoing mail, or small everyday carry items. Dimensions Overall width: 180 mm Overall height: 54 mm Ledge depth: 35 mm (usable depth ~33 mm) Hook spacing: 35 mm center-to-center Mounting: Two countersunk screw holes spaced 105 mm apart. Remix ideas Extend the main backplate and duplicate the hook loop to accommodate more keys. Increase the Y-axis extrusion of the top ledge to hold larger items like wallets. Adjust the mounting hole spacing to match existing wall anchors.
Teardrop Sticker Dispenser
A compact, teardrop-shaped dispenser designed specifically for sticker rolls. The two halves snap together smoothly to fully enclose the roll, protecting the stickers and keeping the tape aligned. Design Details Capacity: Fits rolls up to 95mm outer diameter and 16mm width. Interlock: 5mm deep stepped lip with a 0.3mm radial clearance for a secure, tool-free friction fit right off the bed. Walls: 4mm thick for rigidity, stepping down seamlessly into the inner cavity. Exit: A simple 18mm front slot lets the tape pull freely without snagging. Both halves print flat on their outer faces without supports. If you find the friction fit too tight or too loose on your printer, the clearance parameter is the first thing to adjust.
Slotted Junk Drawer Dividers
A set of four interlocking drawer dividers designed for junk drawer triage. The slotted design allows the pieces to be crossed at right angles to create custom-sized grid compartments. What it's for Organizing 35 cm deep drawers. Creating modular grids for loose items, hardware, or office supplies. Taming messy spaces with a rigid interlocking structure. Dimensions Length: 350 mm per divider. Height: 50 mm. Thickness: 2.4 mm walls. Slot spacing: Spaced every 50 mm along the length, with flared entries for easier assembly. Remix ideas Modify the slot spacing to create custom, unequal compartment sizes. Adjust the overall length to fit shallower or deeper desk drawers. Increase the height for deeper toolboxes or storage bins.
7x10 PALS Grid Panel
A rigid 5mm structural plate designed to mate standard PALS/MOLLE accessories to flat surfaces. Scaled for vertical orientation. Fitment notes Grid layout: 3 columns wide by 5 rows tall. Plate dimensions: 177.8mm (7") wide by 254mm (10") tall. Sized specifically to fit within a standard 256x256mm build volume without diagonal rotation. Mounting interfaces: Standard 1-inch webbing slots with 1.5-inch column spacing. Outer edges carry oversized slots scaled for up to 1.5-inch hook-and-loop straps. Cord routing: 5mm bore holes at webbing intersections accept standard 1/8" or 4mm shock cord.
IKEA RÖDALM iPad Mount
This 3D-printable adapter mounts a 9.7-inch iPad inside an IKEA RÖDALM 21x30 cm frame. It centers the device and acts as a rigid blackout mat to hide the bezels. The back face incorporates ventilation slots to dissipate heat during continuous display, along with access cutouts for the Lightning cable and buttons. Fit: iPad 5th/6th Generation (240 x 169.5 x 7.5 mm) Frame: IKEA RÖDALM (inner rebate 210 x 300 mm, 20 mm deep) Print settings: Prints face-down without supports. Tolerances: 0.5 mm extra clearance on all sides of the device pocket.
Vented Clothes Iron Rest
A wall-mounted rest built to hold a hot clothes iron safely out of the way next to an ironing board. The 130x200mm tray secures the iron behind a 15mm retaining rim, while a grid of 12mm-tall square posts keeps the hot soleplate suspended in the air so it can cool down faster. The tray is supported by a 110mm backplate and three structural gussets to handle the weight of a water-filled iron without tearing out of the drywall. Remixing This Design This is a structural baseline—adjust the parameters to fit the exact iron and mounting location: Tray Dimensions: The 130x200mm footprint fits a standard domestic iron. Scale the width and depth if adapting this for a compact travel iron or an oversized professional model. Cooling Grid: The posts are 6x6mm spaced on a 14mm grid. A denser grid offers smoother sliding, while taller posts increase the ambient airflow. Backplate Drop: The 110mm drop provides necessary leverage for drywall anchors. If mounting directly into a solid wood stud, the plate drop can be shortened and the outer screw holes removed in favor of a single center column. Gusset Extensions: The center support gusset is an ideal anchor point to extend outward and carve out a hook for wrapping the power cord.