100mm Stylized Mouse Figurine
Created today
Description
A 100mm desktop figurine featuring recognizable cartoon proportions, stylized volumetric geometry, and a multi-part colored structure optimized for modern 3D printers. The geometry merges a classic pear-shaped body with a thick, structural lightning-bolt tail and posed limbs.
- Multi-Color Support: Explicit part separation mapped to yellow, black, red, brown, and pink regions, ready for assignment in multi-material slicers.
- Printability: Features a mathematically leveled Z=0 base under the feet, reinforced overhangs, and thickened elements to eliminate brittle failure points in FDM.
- Dimensions: Scaled specifically to 100mm from plate to the highest ear tip.
Images
More like this
Explore more in Decor & Display →
Stylized Yellow Mannequin Torso
A stylized, large-scale human mannequin torso featuring distinct chest, waist, and pelvis segments. The figure includes spherical shoulder joints and relaxed upper arms, tapering gracefully down to the waist. Broad rounded chest structure Dropped upper arms Stable flat base on the pelvis for easy desk display
Flush Citrus Bow Tie
A wearable multi-colour bow tie featuring flush-inlaid citrus slices that are trimmed perfectly to the tie's outer edge. The base is 3mm thick, swapping to the fruit colours halfway up for a clean flush surface. Remix Hooks Scale the Slots: The elastic slots are exactly 2.5mm by 15mm. If you're using thicker strapping, dial that square size up before printing. Tweak the Layout: The position, size, and rotation of every slice is driven by a central data array, making it simple to pack them tighter or scatter them further. Shape the Tie: The bow tie shape is driven by a rough polygon and smoothed via aggressive offset passes; change the offsets if you want a sharper, more geometric profile.
Sectioned Amniotic Egg Anatomy Model
A 180 × 130 × 130 mm egg cut in half along its length. The back half holds every anatomical layer nested with about 0.4 mm gaps. The front shell half is a separate lid you lift away to see inside. Each layer prints flat on its cut face. Layers, outside in Eggshell: 2.5 mm, in two halves Outer and inner shell membranes: 1.4 mm each Chorion: 1.4 mm Albumen: fills the space around the yolk and sac, with channels for the chalazae Yolk, r 28 mm, inside a 1.6 mm vitelline membrane Amnion: a 13 mm sphere with a 10.5 mm cavity, opening at the cut face Embryo: curled, with head, tail and two limb buds Allantois: a sac beside the amnion Chalazae: two twisted cords, each about 50 mm long Air cell: an open void at the wide (+X) end, between the shell membranes Remix hooks Layer offsets (0, 2.9, 4.7, 6.5, 8.3 mm): change these to thicken or thin any membrane. Cut plane: moving it off y = 0 gives a wider or narrower window. A quarter-cut is also an easy variant. Air cell: set by the 72 mm start of its void. Move it to resize the cell. Not included: pins, label plates and a reference chart. Small tags or a printed key card would pair well with this model. Scaling: the model scales cleanly for a smaller, faster print.
Sonderkerzen 1.2
What it's for Vier hohle Kerzenkörper in abgestuften Höhen mit Wachstropfen-Optik. Der Boden ist per Bajonettverschluss abnehmbar. Kleine Rastnasen im Verriegelungsschlitz lassen den Verschluss spürbar einrasten, damit er sich nicht versehentlich löst. Dimensions Höhen: 110, 105, 100 und 95 mm Außendurchmesser 45 mm, Innendurchmesser 37 mm Teilung 25 mm vom Boden Vier 1-mm-Löcher, 16 mm unter dem oberen Rand Remix ideas Rastnase höher oder niedriger für mehr oder weniger Haltekraft Andere Höhenstufen Weitere Tropfenmuster
Kristallkugel auf Podest mit Öse
What it's for Wahrsager-Kristallkugel im klassischen Kinderzeichnungs-Stil: glatte Kugel auf einem gestuften Podest, in einem Stück gedruckt. Die Öse oben erlaubt zusätzlich das Aufhängen an Angelschnur. Dimensions Kugel: Ø 100 mm, hohl, Wand 2,4 mm Podest: Fuß Ø 110 mm, Gesamthöhe bis Kugelsitz 30 mm Gesamthöhe ca. 115 mm, passt auf eine 180×180-mm-Platte Schnurloch: Ø 3,5 mm Remix ideas Sterne oder Mondsymbole in den Podestfuß prägen Öse entfernen für reine Standversion Kugel größer oder Podest höher skalieren
Blank Scroll With Handles
A medieval-style blank scroll stretched between two wooden rods. The parchment features tight spiral rolls on either side and a slightly worn, ragged edge along the top and bottom. The wooden handles extend past the paper and cap off with classic rounded finials. Features: Central Area: Smooth and perfectly flat, left completely blank for custom text or decals. Worn Edges: Subtle distressed cutouts along the top and bottom of the parchment. Sturdy Rollers: Symmetrical wooden shafts with spherical knobs anchoring both ends. Designed to print flat without supports.