14-Compartment AM/PM Pill Organizer
Created today
Description
A seven-day medication organization tray featuring 14 separate compartments for AM and PM dosing. The base tray accommodates individual friction-fit lids embossed with day-of-the-week initials and corresponding sun or moon indicators to separate morning and evening tablets.
- Compartment Volume: 25x25x15mm interior capacity per slot.
- Lid Fitment: Friction-fit covers with a 0.3mm clearance flange.
- Labelling: Embossed text and iconography for tactile identification.
- Format: Lids and base separated for flat build-plate orientation.
Images
More like this
Explore more in Storage & Organization →
200mm 3-Compartment Box Base
The base section of a 200mm square storage box equipped with three equal front-to-back compartments. Isolated for direct printing on 220x220mm beds like the Creality K1C. What it fits Sorting and protecting mid-sized tools, hardware, or craft supplies. Mates with the matching 205mm drop-on lid. Dimensions to check Base outer: 200 x 200 x 50 mm Compartments: Three slots, each 64 x 196 x 48 mm internally Wall thickness: 2 mm universally
Drop-In Double Fiskars Knife Dock w blade storage
A custom Gridfinity-compatible tool tray designed to dock the Fiskars Pro Retractable Utility Knife (model 770210-1001). The heavy-duty aesthetic of the Fiskars knife calls for a simple, rugged docking station. Built on a standard 4x2 unit footprint, this tray swallows the knife whole while leaving generous finger grabs to pop it out fast when you're mid-project. Design Features 4x2 Gridfinity Footprint: Drops seamlessly into standard 42mm grid baseplates. Tapered Base Profiles: Easy alignment and standard Gridfinity locking dimensions. Ample Finger Clearance: Scalloped sides mean no digging around to retrieve your blade. Slider Channel: An extra-deep central groove ensures the blade slider button doesn't bottom out.
Fairy-Tale Flat-Print Tree Organizer
This flat-pack, two-piece organizer channels a storybook woodland silhouette while keeping print times fast and failures low. The tree geometry is laid completely flat on the print bed, dodging the need for support material entirely. Once the plate is finished, it slots vertically into the heavy river-stone base to stand upright, offering nineteen upward-angled pegs to hold small items. Print and Assembly Notes No Supports Required: Both the tree profile and the upward-facing mushroom hooks are designed to clear overhang limits naturally. Sturdy Assembly: A deep mortise in the base block holds the flat-printed trunk firmly in place. Utility: Ideal for hanging rings, light necklaces, keychains, and hair ties.
Aufsteck-Schraubklemme mit Haken
Eine umstrukturierte Klemmhalterung, die sich als offenes U-Profil direkt über ein 15 x 15 mm Vierkantrohr stecken lässt. Die Fixierung erfolgt durch eine gedruckte M10-Druckschraube auf der Rückseite, die das Rohr fest gegen die Vorderwand presst. Auf der Frontseite sitzt ein massiver Haken. Anpassungsmöglichkeiten für Remixes Dieses Modell ist so ausgelegt, dass die grundlegenden Klemm-Mechanismen leicht für andere Einsatzzwecke skaliert werden können: Stangenmaß: Der innere Ausschnitt hat aktuell 15,6 mm Breite für etwas Spiel auf 15 mm Stangen. Wer größere Rohre nutzt, kann den Hauptkörper entsprechend verbreitern. Haken-Geometrie: Der Ausleger ragt 12 mm nach vorne, die Spitze zieht 16 mm nach oben. Das lässt sich gut durch flache Halterungen oder Ösen ersetzen. Gewinde: Das M10x2 Gewinde hat im Gehäuse 10,6 mm Durchmesser (intern). Für mehr Klemmkraft auf glatten Metallrohren kann die Schraube gegen eine Standard-Metallschraube mit Gummipad getauscht werden.
Threaded Dual Incense Cases
Slip-fit caps always pop open exactly when you drop the case on the floor, scattering thin brittle sticks everywhere. I swapped the friction fit for a short threaded section — just three coarse turns so it secures fast but doesn't take all day to unscrew. Sizing and Fit Short Case: Fits standard 5.25" (133mm) sticks with a couple of millimetres to spare. Long Case: Fits 8.75" (222mm) sticks. Threads: 3mm pitch, 9mm length. Prints fine without supports, but don't over-tighten on the first test fit until the threads wear in.
Wall-Mounted Display Shelf
A sturdy wall-mounted shelf featuring a J-profile design with open sides. Built specifically to support moderate loads up to 2 kg, it includes a generous structural fillet at the rear corner and three countersunk mounting points to distribute weight evenly against the wall. A pronounced front lip keeps displayed items securely in place. Dimensions Overall Width: 240 mm Overall Depth: 80 mm Back Wall Height: 60 mm Front Rim Height: 30 mm Material Thickness: 6 mm Print Notes Prints flat in its natural orientation (bottom surface on the build plate). The integrated countersunk holes are designed to be printed horizontally; they will bridge correctly on most standard FDM profiles without requiring internal supports. Recommended to use at least 3 perimeters (walls) for structural strength. Assembly Mounts directly to a flat surface using three standard flathead or countersunk screws (up to 4.5 mm thread diameter, 9 mm head). Suitable wall anchors are recommended based on the mounting surface to achieve the full 2 kg load capacity.