Description
What it's for
A simple, flat 160mm square plate, suitable as a foundational base, shim, or blank canvas for further structural modifications.
Dimensions
- Width & Length: 160 mm x 160 mm
- Thickness: 4 mm
Remix ideas
- Subtract precise mounting holes to use it as an electronics sled.
- Carve out a hex grid to create a lightweight mesh panel.
- Emboss or deboss a logo into the top face.
Images
More like this
Explore more in Workshop & Tools →
dimensions test plate
A specialized, low-profile custom plate designed to tight dimensional constraints. Measuring exactly 1mm thick, it provides a precise mounting or spacing surface with asymmetrical bore sizes. Specifications: Dimensions: 50mm length, 25mm width, 1mm thickness. Primary Bore: 18.5mm diameter. Secondary Bore: 16.5mm diameter. Clearances: Exactly 5mm of material left between the outer edges and the bores, as well as between the bores themselves.
Anello Frazionato da Palo
Un anello di spessoramento diviso a metà, progettato per essere montato attorno a un palo da 137 mm di diametro. Profilo: Parete spessa 3 cm Fori: Quattro fori passanti verticali, diametro 4 mm, disposti in quadrato con lato 121 mm Assemblaggio: Spaccato centralmente per consentire l'installazione su tubi e pali esistenti senza doverli sfilare. Utile per creare spessori o basi su tubolari in metallo o PVC.
20 mm Round Disc, 2 mm Thick
A flat 20 mm round disc, for when a 2D circle needs to become something you can print and hold. A bare circle has no thickness, so this gives it enough to print as a solid piece. Print details Diameter: 20 mm Thickness: 2 mm (assumed, since a plain circle has no height) Sits flat on the bed, no supports needed Prints in any filament
T-Shaped Mounting Blocks
A pair of 40mm tall, T-shaped mounting blocks designed to bolt flush against flat surfaces. Both versions feature 4.5mm clearance holes with deep 45-degree countersinks sized for 9mm screw heads. Two-Hole Block: Dual mounting points vertically spaced at 10mm and 30mm for rigid anti-rotation fixing. One-Hole Block: Single central mounting point at 20mm height. Dimensions: 20x20mm main body with a 5x30mm mounting flange. Tolerances: 2mm corner rounding on all vertical edges to relieve stress and ease printing.
Heavy Soldering Helping Hands Base
A heavy replacement base for a helping hands soldering tool, designed to prevent the assembly from tipping over during use. The top surface incorporates four scooped pockets for holding screws and small electronic components securely on the bench. 120x120mm footprint with a 40mm thickness for stability. Central 10mm diameter vertical hole, 30mm deep, to mount standard helping hand posts. Rounded pocket bottoms allow for easy retrieval of small parts. Chamfered outer edges.
fence conector
A minimalist, heavy-duty H-profile block. Designed with tight inner clearances and thick outer walls, this spacer is ideal for slotting over rails or serving as a sturdy structural bracket. Dimensions Overall Size: 36mm wide × 50mm deep × 40mm high. Inner Channel: 16mm gap width. Wall Thickness: Solid 10mm posts on either side. Print Notes Prints cleanly on its back or base without supports. The 3mm edge rounding improves handling and prevents stress concentrations at the corners.