1M Subscriber Creator Trophy
Created today
Remixed once
Description
A customized 1,000,000 subscriber milestone plaque for Medox. Built thick and heavy to sit solidly on a desk, the geometry takes its cues from classic creator awards with a prominent center play button and bold, stacked typography.
The most important structural choice here is the completely flush back surface. By aligning the rear face of the base with the rear face of the vertical plaque, the entire model can be laid flat on its back in a slicer. This guarantees a support-free print and makes dual-color printing trivial by simply swapping filament at the upper layer heights.
Remix Hooks
- Text & Fonts: Uses Archivo Black for the headers and Montserrat for the sub-text. Swap the
text()strings to change the channel name or language. - Depths: The main plaque is 15mm thick. The play button extrudes 3mm from the face, and the text extrudes 1.5mm.
- Scaling: The 180x50mm base footprint handles desktop display well, but the entire model can be safely scaled up uniformly if your build volume allows.
Images
More like this
Explore more in Decor & Display →
medox_100000_feliratkozo
160x210mm wall-mountable display plaque for the Medox channel. Prints entirely flat on its back. Built-in bridged keyhole mount for a standard #8 or 4mm pan-head screw. 8mm thick base slab, 3mm raised features. Color swaps can be done directly by layer height (base finishes at Z=8mm). Verify your printer bed can clear the 210mm overall length.
Cartoon Spooky Family Plaque
A classic cartoon-styled wall plaque celebrating the Halloween season, featuring a prominent mouse-ear silhouette and raised custom typography. A cast of familiar costumed characters stands along the base, surrounded by bats, jack-o'-lanterns, and starry skies. Designed for precise multi-material FDM printing: Separated Geometry: All distinct colors are built as independent, non-overlapping solids, ensuring crisp transitions when sliced. No Support Needed: The flat back and shallow 3D relief print perfectly flat on the build plate. Scaled for Production: Outermost bounds are dialed in slightly under 250 mm to fit seamlessly on a standard Bambu or similar modern print bed.
Low-Profile Iceberg Display Shelf
A minimal, wall-mounted display shelf featuring a low-poly hexagonal platform. Perfect for lightweight prints or figures, the wall plate is kept short and unobtrusive so the focus stays on what you're displaying. Low-profile wall plate with two mounting holes Hexagonal "iceberg" shape platform Designed to print flat on its back for maximum corner strength
Cali-Burrito Chibi
Un burro de calibración estilo low-poly. Ideal para comprobar tolerancias y voladizos en impresiones rápidas, con el innegable encanto geométrico de las clásicas piezas de calibración pero en forma de burrito. Detalles de impresión Ojos y nariz: Grabados a apenas tres capas de profundidad (0.6mm), lo justo para crear sombra. Patas y orejas: Construcción recta biselada para evitar la necesidad de soportes. Base: Completamente plana sobre el origen.
Lucent — Acrylic Spine Stand
Lucent is a minimalist C-channel spine designed to hold two 1-inch thick, 4x6 acrylic photo blocks in a vertical stack. Rather than encasing the blocks, it grips them from the back using a continuous tension spine and two tiny retention tabs at the extreme top and bottom, remaining almost completely invisible from the front. The entire assembly leans back at a subtle 7-degree angle. Because 2 pounds of solid acrylic has a tendency to tip, the clip features an extended, wedge-shaped rear foot that acts as a counter-lever, keeping the stack firmly planted on your desk. Dimensions Capacity: Holds exactly two 4" x 6" x 1" blocks stacked vertically (8" total height). Clearance: 26.2mm deep slot with a 204.4mm height, allowing the blocks to slide in easily from the side without binding. Footprint: 40mm wide by 75mm deep. Print notes When you import this into your slicer, lay it flat on its side. Printing it sideways ensures the layer lines run continuously along the entire length of the spine. If you print it standing upright, the layers will run horizontally, and the leverage of the heavy acrylics will snap the spine across a layer line. Printed flat, it requires zero supports and is essentially unbreakable.
goofy stick man
A flat-profile stick figure designed to be printed directly on the build plate. It features an asymmetrical, awkward stance and a simple cut-out face. Fitment & Dimensions Thickness: 5mm flat profile across all limbs and head. Overall Size: Roughly 50mm wide by 85mm tall. Mounting: None. This is a freestanding flat object meant for desk display or to be glued onto another surface.