200mm Hinged Enclosure Case
Created today
Description
What it's for
A heavy-duty mounting enclosure that now features an integrated hinge system and a reliable snap-fit latch, replacing the standard friction-fit lid. Designed to house circuit boards, sensors, or bulky wiring, with a secure close that remains easy to access for maintenance.
Dimensions
- Overall footprint: 200 mm × 200 mm
- Internal depth: 50 mm (plus clearance inside the lid lip)
- Mounting: Four 5 mm screw holes spaced 30 mm in from the corners
- Hardware: The hinge uses a standard 3.5 mm pin channel (can be fitted with raw filament or a metal rod)
Assembly
Both pieces print flat on the build plate. Once printed, insert a piece of 1.75 mm filament, a stiff wire, or an M3 bolt through the hinge knuckles to secure the lid to the body. The latch requires no extra hardware—it operates via intentional plastic flex.
Photos
Technical views
More like this
Explore more in Storage & Organization →
PurrFeed — Cat Food Dispenser
Meet PurrFeed — a clean, wall-mounted gravity dispenser designed specifically for 3oz (85g) cat food pate tins, such as Kirkland Signature or Fancy Feast. Load the cans in from the top, and pull them out one by one from the bottom chute. The vertical design takes up zero counter space, and a front viewing channel lets you see exactly how many portions are left before it's time to restock. Features Gravity Feed System: Holds roughly 6 cans at a time; grab the bottom one and the stack cleanly drops down. Tactile Retention Bump: A tiny raised lip at the floor of the extraction window keeps the bottom can securely seated until you lift and pull it out. Recessed Mounting: Three countersunk wall-mounting holes are located down the spine. The screw heads recess fully into the plastic so they won't scratch the cans as they slide past. Sight Window: The 26mm wide front channel gives you a clear view of your supply and doubles as a thumb slot for sliding cans out. Dimensions Overall Footprint: 76mm wide × 76mm deep × 250mm tall. Internal Track: 70mm internal diameter (fits standard 65–66mm pate tins with enough clearance to prevent binding). Extraction Chute: 68mm wide × 42mm tall.
Slant-Mount Storage Basket
This basket is designed to clip into a 72x45mm angled opening. The body includes a chamfered bottom corner that perfectly matches a 45-degree mounting plane, allowing the basket to sit level despite the angled interface. Angled Mount: Integrates seamlessly with 45-degree surfaces. Snap-fit Boss: Features flex slots that allow it to compress and securely click into place. Level Base: Maintains a flat interior and flat bottom resting point despite the angled mount.
Splice — Magnetic Hard Case
A rugged, two-piece protective case engineered to house bulky, wraparound eyewear. The two halves print flat and assemble via a robust mechanical hinge, securing shut with discrete magnetic closures. Features Filament Hinge: Designed to accept a length of standard 1.75mm filament as the pivot pin, producing a perfectly tight, metal-free joint. Magnetic Closure: Four dedicated pockets in the front corners accept standard 6×2mm round magnets for a satisfying, hardware-free snap. Dust Lip: The base features an extruded inner ring that mates seamlessly with a corresponding channel in the lid, ensuring precise alignment and keeping debris out. Dimensions Exterior: 165 × 75 × 60 mm (closed) Internal Clearance: 159 × 69 × 54 mm Walls: 3 mm solid perimeter Assembly Notes Print both halves flat on the bed. Once complete, insert the magnets into their corresponding pockets (a drop of CA glue is recommended), align the back knuckles, and thread a piece of 1.75mm filament straight through the hinge line. Snip the excess filament flush.
Monolithic Helmet Hook
A robust, monolithic wall hook designed specifically for the bulk and straps of bicycle helmets. The sweeping, angled arm reaches out far enough to clear the wall, terminating in a rounded lip that won't dig into foam liners or fray fabric straps. Built to print cleanly standing up, the overhang angles are steep enough to self-support on most FDM machines. Mounting Details Backplate: 120mm tall by 40mm wide, distributing the load. Hardware: Two standard 5mm countersunk screw holes. Clearance: The upper screw hole is positioned well above the hook's lip to ensure a screwdriver can reach it straight-on without interference.
12mm Bore 8-Slot Screwdriver Rack
An 8-position wall rack designed around a straight 12mm bore to capture standard screwdriver shafts. The top of each slot flares into a 30mm funnel, guiding tools into place without precise alignment above the workbench. Capacity: Holds eight screwdrivers with shaft diameters up to 11.5mm. Handle Clearance: 32mm center-to-center spacing. Accommodates standard acetate or rubber grips, but will crowd or reject over-molded handles larger than 30mm. Mounting Interface: Three recessed bores cut for standard #8 countersunk screws. Critical Dimension: Verify the maximum diameter of the tool handles before printing to ensure they will not interfere across the 32mm spacing.
Offset Cart Spacer Hook
A heavy-duty mounting hook designed to jump over a cart's top lip and drop down flush against the main side wall. This model includes a spacer brace that sits dead-center behind the hook's lower curve, squaring the load firmly against the side of the cart so it stays plumb under heavy weight. The entire bottom corner is filled solid to prevent flexing at the joint. Remix Dimensions Top Clearance: 22.5mm width for the top cart edge. Lip Jump: Steps out 20mm to clear the side lip. Spacer Clearance: Drops exactly 40mm before the spacer starts pushing back against the cart. Thickness: 12mm thick continuous walls printed flat for extreme layer-adhesion strength. Hook Loop: 40mm inner diameter open-top hook.