5-Way Flat H-Manifold
Created today
Description
What it's for
A flat pneumatic or fluid splitter featuring five branches. Arranged in an H-configuration with an additional trailing branch, keeping the entire assembly planar for simple routing and straightforward printing.
Dimensions
- Branch outer diameter: 10 mm
- Branch inner diameter: 7 mm (1.5 mm walls)
- Overall length: 50 mm (from the closed cap to the tail tip)
- Overall width: 40 mm (across the parallel arms)
- Spacing: 25 mm between the two cross sections
Print notes
Lays entirely flat on the print bed. The horizontal pipes print safely without supports on most standard FDM setups.
Images
More like this
Explore more in Workshop & Tools →
dome 3
A plain flat disc in the spirit of an oversized washer or a vinyl-record blank: 3 inches across, 1/8 inch thick, with a clean 1 cm hole through the centre. Prints flat with no supports. Diameter: 76.2 mm (3 in) Thickness: 3.175 mm (1/8 in) Centre hole: 10 mm Good for spacers, coasters, templates, or as a base for other builds
20 mm Round Disc, 2 mm Thick
A flat 20 mm round disc, for when a 2D circle needs to become something you can print and hold. A bare circle has no thickness, so this gives it enough to print as a solid piece. Print details Diameter: 20 mm Thickness: 2 mm (assumed, since a plain circle has no height) Sits flat on the bed, no supports needed Prints in any filament
Clay Cutter with Pressing Rim
A sharp clay cutter that won't dig into your hand when you press down. The cutting edge is shaped to print cleanly with a standard 0.4 mm nozzle, dropping to a precise two-perimeter thickness at the tip. Internal diameter: 100 mm Overall height: 10 mm Tip thickness: 0.8 mm (tapered on the outside only) Pressing rim: 6 mm wide with a rounded upper edge for comfort Prints exactly as oriented, no supports needed.
Empreinte Éventail Rayonnant 50mm
Matrice d'empreinte rigide reproduisant la géométrie d'un éventail ouvert. Conçue pour marquer l'argile, la cire ou d'autres pâtes malléables, la pièce est construite sur un plan de référence plat garantissant une pression uniforme. Le motif est généré par un réseau radial de nervures profilées, sans contre-dépouilles, pour assurer un retrait propre du matériau embouti. Dimensions hors-tout : Hauteur de 50 mm, ouverture de 140 degrés. Épaisseur de base : 3 mm (socle rigide). Motif : 13 nervures coniques s'évasant vers l'extérieur, arrêtées 2 mm avant la bordure pour garantir une marge nette. Démoulage : Les arêtes extérieures sont adoucies et les nervures présentent un profil elliptique aplati (mise en dépouille) évitant l'arrachement de la matière. Tirage : Aucun support requis, fond parfaitement plat adapté au plateau de l'imprimante.
VakuumRačva — Ojačani Model
VakuumRačva je robustan, ojačan T-profilni razvodnik namenjen za pouzdano povezivanje vakuumskih vodova. Ovaj model poseduje namenski M10 navoj na zadnjem delu koji je sada dodatno stabilizovan konusom protiv pucanja slojeva pri bočnom opterećenju. Specifikacije Glavni navoj: Unutrašnji 1/4" BSP (dubine 15 mm) za prihvat vakumetra. Dodatni navoji: Spoljni M12 (korak 1.25) na debljem kraku i spoljni M10 (korak 1.5) na zadnjem delu. Protok: Unutrašnji kanali obezbeđuju ravnomeran prenos bez suženja (6 mm i 6.2 mm). Ojačanja: Konusne baze ispod svih kritičnih priključaka čuvaju integritet komada. Preporuke za štampu Štampajte od PETG ili ABS materijala zbog mehaničke otpornosti. Manja visina sloja osiguraće da navoji lakše prihvate spojeve.
Screw-On Large-Hole Spool Holder
A plate-mounted spool holder for filament spools with large central holes. A hollow 48 mm spindle rises from a flat mounting plate and ends in a flared lip that keeps the spool from sliding off. Remix hooks Spindle diameter (48 mm): change to suit your spool bore; most big-hole spools measure 50–58 mm, so leave 2–4 mm of play. Spindle length (70 mm): stretch for wide spools, shorten for slim ones. Plate (110 × 64 × 6 mm): screw holes sit 44 mm either side of centre, 4.5 mm with countersinks. Move them to match your panel, or add a third hole. Lip: 58 mm with a 45° underside so it prints without supports. Make it a removable cap for easy spool swaps. Wall (3 mm): thicken for heavy 3 kg spools, or add ribs. Prints plate-down with the spindle pointing up. Mount with the plate against a vertical panel so the spindle points sideways; a pair stacks well for dual spools.