55mm Recessed Text Cookie Stamp
Created today
Description
A one-piece 55mm circular stamp designed to emboss raised text into cookie dough. Built for a school fair baking project, the face features 3mm deep recessed lettering, mirrored to read correctly on the final baked good. A domed palm-knob provides even pressure distribution during batch stamping.
- Dimensions: 55mm diameter face, 39mm overall height.
- Impression Depth: 3mm recessed text for crisp relief.
- Typography: Alfa Slab One, optimized for legibility in heavy doughs.
- Form: Domed top handle for palm-pressed leverage.
Images
More like this
Explore more in Kitchen & Bathroom →
140mm Striped Cookie Stencil
A flat, 1mm-thick stencil designed for decorating cookies and baked goods with horizontal stripes. The pattern features alternating 5mm cutouts and solid bands, enclosed by a rigid 10mm perimeter. A tab extends from the top edge for handling and includes a 6mm hole for hanging storage. Specifications Overall Dimensions: 140 × 140 mm (5.5 × 5.5 in) frame. Pattern Area: 120 × 115 mm. Stripe Width: 5 mm gaps spaced by 5 mm solid dividers. Thickness: 1.0 mm (ideal for 5 layers at 0.2 mm layer height). Storage: 40 mm wide top tab with a 6 mm hanging hole.
94mm Bore Container Plug Lid, 8mm Plug
A round plug-style lid for a container with a roughly 94 mm inside diameter. A 100 mm flange rests on the rim and an 8 mm deep, 93.4 mm plug drops into the bore. Fitment Fits: round containers with a bore near 94 mm. Does not fit: bores under 93.4 mm, or slip-over use on a rim. Measure before printing: the container's inside diameter. The plug is 93.4 mm, so a 94 mm bore leaves 0.3 mm per side. Details: the underside is hollowed to 87 mm, leaving a 3 mm flange top and a 3.2 mm plug wall. Overall height: 11 mm.
Galaxy Cap & Pets
A standalone pop-top can cover designed for easy swapping of customizable 3D-printable pets. Hooks for Remixing The Peg System: The mounting peg on the cap is a standard 3.8 mm cylinder, sitting slightly toward the back edge. Any custom object with a matching 4.2 mm socket will drop right on. Skull Profile: The flat skull on the cap is an exact scaled-down copy of the original 3D geometry. Expansion: Want to add more utility? You could stretch the cap base horizontally to house three or four pets simultaneously, or angle the peg so the figure faces upward when the can is open.
Components view 1st
A touchless smart tap automation enclosure designed to sit directly onto a 15–24 mm tap throat. This is the fully assembled internal view of the water and power management systems. The IP65-style base box drops over the E18-D80NK IR proximity sensor up front and houses native standoffs for standard 50×40 mm and 35×25 mm logic boards. Fitment Checklist Throat: Clamps over 15–24 mm circular taps Sensor Bore: Front-facing 18 mm drop-in for cylindrical IR sensors Tubing: Routing pathways built strictly for 6 mm OD / 4 mm ID polyurethane lines Valve Clearance: Central bay fits standard inline 1/4" 12V DC solenoids
GlideTrak — Under-Shelf Stemware Rack
GlideTrak is an under-shelf stemware storage block designed to securely hold up to four standard wine glasses upside down by their stems. The dual-channel architecture features a continuous track that flares wide at the opening, allowing smooth, one-handed retrieval and stowing of glasses without requiring precise visual alignment. Engineered as a robust mounting block, it secures flush against the underside of a cabinet while maintaining a clean profile. Features Flared Entry: The stem slot narrows from a 14 mm flared opening down to a 9 mm continuous track, guiding standard stems seamlessly into place. Concealed Mounting: Six countersunk holes with screwdriver access tunnels provide secure upward mounting, hiding the screw heads deep within the block. Support-Free Printing: Engineered to be printed standing vertically on its flat back wall, allowing the internal cavities to form cleanly without the need for support material. Dimensions Overall Footprint: 212 mm wide × 170 mm deep × 22 mm thick. Base Clearance: 82 mm wide internal cavity per channel to accommodate standard glass bases. Stem Track: 9 mm track width, expanding to a 14 mm flare at the front entry.
Ridged Cutlery Grip Sleeve
A chunky, ridged sleeve designed to slide over standard fork and spoon handles, expanding their overall diameter. It provides a more substantial holding surface for individuals with limited hand strength, reducing the exertion required during meals. 30mm outer diameter with a fluted exterior for a secure hold 100mm overall length fits securely across the palm 12x4mm center slot accommodates most flat, stamped cutlery handles Soft-cornered bore grips the flatware to prevent spinning under load