608 Bearing Level Wind Shaft
Created today
Description
A continuous reversing lead screw shaft, designed to drive a reciprocating carriage without needing the motor to switch direction.
- Ends are dimensioned for a 608 bearing (8 mm bore).
- The track is a 5 mm spherical U-groove; pair it with a 4.5 mm or 4.8 mm round follower pin so it can swivel without binding at the turnarounds.
- Total effective travel between reversing points is 75 mm.
Images
More like this
Explore more in Workshop & Tools →
Klipper Display and Status Console
Compact left-side mounting enclosure for Klipper printer telemetry, designed specifically for the Ender 3 Pro 2040 vertical extrusion. Hardware Compatibility: Fits a 1602A I2C LCD, a 32x32mm HW-109 MAX7219 LED Matrix, and a standard 5mm RGB LED. Internal Clearance: 36mm cavity depth cleanly clears standard I2C backpacks. Mounting System: Left-oriented 5mm side flange using dual slots for M4 t-nuts. Flange sits flush to the bottom, leaving top clearance for gantry travel. Assembly: Snap-fit 2mm front panel with internal screw bosses; back plate secured via four M3 interior corners. The housing prioritises rigidity and short wiring paths over bulk, anchoring firmly without compromising structural frame limits.
Bajan Wave — Flag Mold Master
Bajan Wave is a purpose-built 3D-printable master designed for silicone mold-making. It features a sweeping, parametric undulating perimeter that mimics a flag fluttering in the wind, standing out against basic rectangular forms. The basin precisely follows this waving profile and includes the defining elements of the Barbados national flag—vertical section dividers and the iconic broken trident, carefully proportioned to match official specs. The entire underside is perfectly flat, ensuring it sits securely against your casting box base without flashing underneath, while a consistent 8mm perimeter rim includes two integrated resting grooves. Specifications Overall Master Size: 120 mm x 70 mm x 15 mm Basin Floor: 4 mm thick Rim Width: 8 mm constant width following the wave Relief Details: Features a 2 mm raised broken trident and divider bars for high-contrast resin fills.
Zauberstab 3.3
What it's for Zweiteiliger Zauberstab mit Griff für eine UV-Lampe und aufdrehbarer Spitze. Drei dicke, runde Stränge winden sich wie aufgeklebte Teigschlangen um den Stab und laufen in der verriegelten Endstellung von Griff zu Spitze durch. Dimensions Griff: 87 mm hoch, 85 mm Innenhöhe, Innendurchmesser 21,8 mm Spitze: 135 mm inklusive Zapfen, verjüngt sich nach oben Rillengrund Ø 26,4 mm, Strangkuppen ca. Ø 30,4 mm Lichtkanal in der Spitze von 18 mm auf 9 mm Vier Bodenlöcher Ø 3,75 mm Remix ideas Strangzahl oder Drehung ändern Strangdicke anpassen Andere Muster wie Borke oder Astlöcher
Industrial Pull Plate
A heavy-duty mounting plate featuring an integrated pull tab and precise counterbored holes. Designed for easy handling and a flush fit with socket head hardware. Mounting Interface: 4x 4.3mm thru-holes with 6.5mm counterbores (4mm deep) Spacing: 72mm x 40mm pattern Convenience: Rounded 35mm pull tab with a 10mm grip hole
door lock
Rectangular block, 100 mm long, 24 mm wide and 15 mm tall, with a 16 mm wide by 11 mm deep groove running the full length along the top centre. The groove size is engraved into the groove floor as "16 x 11 mm". Overall size: 100 x 24 x 15 mm Groove: 16 mm wide x 11 mm deep, open at both ends Side walls: 4 mm; floor: 4 mm Engraving: 0.6 mm deep, readable from above Prints flat with no supports
Custom Hex Standoff Tube
Off-the-shelf hardware never matches the exact gap, leaving assemblies rattling or crushed. This custom hex standoff fills the exact space needed while keeping the internal bore clear for a rod or bolt to pass through. Dimensions Height: 55.0 mm (5.5 cm) Outer Profile: 5.15 mm point-to-point hexagon Inner Bore: 2.50 mm diameter