80mm Dual-Zone Hexagonal Organizer
Created 1 months ago
Description
A stepped geometric desk organizer designed with an asymmetric internal divider. It serves as an alternative to standard, single-height store-bought cups by offering two distinct storage zones within an 80mm hexagonal footprint. The rear compartment supports tall items like pens and markers, while the front compartment is scaled for smaller desk supplies like paper clips and erasers.
- Dimensions: 80mm outer diameter, 80mm maximum height.
- Rear Compartment: Full height (80mm), allocating approximately 60% of the internal floor area.
- Front Compartment: Partial height (26.6mm), allocating approximately 40% of the internal floor area.
- Wall Thickness: 2mm external and internal dividing walls.
Images
More like this
Explore more in Desk & Tech →
Armored Figure Headset Stand
A sturdy desktop headset stand featuring a geometric, stylized armored figure integrated directly into the vertical support column. The design merges practical utility with a block-bot aesthetic, supporting standard gaming headsets on a wide, curved top rest. Heavy 120x110 mm base for stability Wide U-shaped headset saddle prevents band indents Integrated four-color figure designed for multi-material FDM Chamfered geometry prints cleanly without supports
Desktop Organizer & Can Holder
Every side table eventually turns into a dumping ground for the same four items that refuse to stack: the remote that slides off the armrest, the phone getting buried, the loose change wandering around, and a drink waiting to be knocked over. This block gives each of them a fixed, walled-off zone. It prints as a single heavy chunk with a wide footprint so it stays planted when a tall remote is yanked out of it. The internal corners are rounded to stop dust and change from cementing into sharp corners. Dimensions & Fit Overall Footprint: 156mm wide, 116mm deep, 80mm tall. Can Pocket: 70mm diameter (clears standard 66mm aluminum cans), 60mm deep. Remote Pocket: 70x34mm, 75mm deep for tall stability. Phone Pocket: 74x20mm, 50mm deep to hold it upright. Misc Tray: 74x70mm, 40mm deep for keys, coins, or earbuds. Printing: No supports required. Print flat on the base. Use 10-15% infill to give it enough mass to stay put.
Manta Contour Console Grips
Echoing the sweeping, organic lines of marine life, these bionic-contoured grips transform a rigid, slim handheld into a natural extension of the hands. The bulbous outer shell fills the empty space of a relaxed grip, completely banishing the cramped claw-hand fatigue of marathon sessions. A precision-channeled core seamlessly bites onto the edges of the device without crowding the action. Design Specs The Swell: Sweeps 25mm outward from the console body to fully support the lower palm. The Fit: Parallel channels lock cleanly over a 10mm chassis edge, utilizing lead-in chamfers for a smooth, scrape-free slide. The Clearance: A minimalist 4mm front lip ensures thumbs never collide with the plastic while reaching for the D-pad. The Fabrication: Symmetrical vertical extrusions designed to sit flat on the build plate without requiring supports.
FocusLine — Reader Aid Ruler
A low-profile reader aid and metric ruler designed to block out surrounding text on standard A4 pages, keeping focus on a single line. Features Reading Window: 170mm wide slot precisely sized for A4 documents. Metric Ruler: 18cm top edge with 1mm increments for quick measurements. Personalized: Raised name plate with elegant diamond accents. Print Notes Prints perfectly flat with no supports required. Add a filament swap at 2.0mm to highlight the text and accents against the base.
Funda Galaxy A20e pablo
Funda rígida diseñada específicamente para las dimensiones del Samsung Galaxy A20e (147,4 × 69,5 × 8,3 mm), incorporando márgenes de tolerancia estructurales para facilitar la inserción del dispositivo. La cara trasera presenta el nombre "Pablo" integrado en relieve volumétrico sólido, utilizando la fuente seleccionada para maximizar la resistencia de las letras. Material recomendado: PLA, PETG o TPU (dependiendo de la flexibilidad deseada). Relieve de texto: 1,5 mm, extruido hacia el exterior. Tolerancias: +0,6 mm en ejes X e Y para un acople por fricción sin forzar la estructura. Perforaciones: Cámara principal dual, lector de huellas dactilares trasero, botonera lateral completa y acceso inferior (USB-C/Audio/Altavoz).
DataStack — Enclosure Core
A lightweight, 4-bay enclosure body for 2.5" SATA HDDs. Features Stripped-down chassis with extensive material-saving cutouts Integrated rails for 4 drives Rear bosses for mounting a custom PCB backplane Designed to be printed on end (resting on the back faces) to avoid internal supports.