94mm Bore Container Plug Lid, 8mm Plug
Created today
Description
A round plug-style lid for a container with a roughly 94 mm inside diameter. A 100 mm flange rests on the rim and an 8 mm deep, 93.4 mm plug drops into the bore.
Fitment
- Fits: round containers with a bore near 94 mm.
- Does not fit: bores under 93.4 mm, or slip-over use on a rim.
- Measure before printing: the container's inside diameter. The plug is 93.4 mm, so a 94 mm bore leaves 0.3 mm per side.
- Details: the underside is hollowed to 87 mm, leaving a 3 mm flange top and a 3.2 mm plug wall.
- Overall height: 11 mm.
Images
More like this
Explore more in Kitchen & Bathroom →
36mm Bore Honeycomb Egg Dispenser
An upright, gravity-fed egg dispenser scaled for a 36mm bore, fitting quail or small pullet eggs. The Fitment: 36mm internal width. This will immediately jam on standard grocery store Grade A Large eggs. The Structure: Uses a 1.8mm solid-web honeycomb shell to reduce material use without sacrificing structural rigidity or leaving isolated printing islands. The Feed: Features an internal 18mm high sloped ramp leading down to an arched dispensing port.
43mm Bore Egg DSLR Kit
A multi-part glue-together camera chassis built around a 43mm bore standard to hold two large chicken eggs. The main chassis houses the egg bores and the right-hand grip, while all dials, rings, and screens are printed separately and dropped into 1mm alignment recesses on the main block. Fitment Fits two standard large/jumbo chicken eggs (vertical clearance is completely unimpeded) Mounts to flat build plates only; requires CA glue or similar for the detail pieces Main chassis is 125mm wide; ensure your plate can handle it before starting
Ribbed Bathroom Pot
Tall, top-heavy bathroom items have a habit of tipping over or leaving residue on the counter. This ribbed pot is built with thick walls to stay put, corralling toothbrushes, razors, or makeup brushes so they stop sliding around. Fit & Print Outer diameter: 80 mm Height: 100 mm Internal diameter: 72 mm Features: The inside base has a 4mm fillet (a smooth curved transition) instead of a sharp corner, so toothpaste or dust can't get permanently stuck in the bottom rim. Printing: Prints straight on the bed. No supports required.
Galaxy Cap & Pets
A standalone pop-top can cover designed for easy swapping of customizable 3D-printable pets. Hooks for Remixing The Peg System: The mounting peg on the cap is a standard 3.8 mm cylinder, sitting slightly toward the back edge. Any custom object with a matching 4.2 mm socket will drop right on. Skull Profile: The flat skull on the cap is an exact scaled-down copy of the original 3D geometry. Expansion: Want to add more utility? You could stretch the cap base horizontally to house three or four pets simultaneously, or angle the peg so the figure faces upward when the can is open.
Components view 1st
A touchless smart tap automation enclosure designed to sit directly onto a 15–24 mm tap throat. This is the fully assembled internal view of the water and power management systems. The IP65-style base box drops over the E18-D80NK IR proximity sensor up front and houses native standoffs for standard 50×40 mm and 35×25 mm logic boards. Fitment Checklist Throat: Clamps over 15–24 mm circular taps Sensor Bore: Front-facing 18 mm drop-in for cylindrical IR sensors Tubing: Routing pathways built strictly for 6 mm OD / 4 mm ID polyurethane lines Valve Clearance: Central bay fits standard inline 1/4" 12V DC solenoids
GlideTrak — Under-Shelf Stemware Rack
GlideTrak is an under-shelf stemware storage block designed to securely hold up to four standard wine glasses upside down by their stems. The dual-channel architecture features a continuous track that flares wide at the opening, allowing smooth, one-handed retrieval and stowing of glasses without requiring precise visual alignment. Engineered as a robust mounting block, it secures flush against the underside of a cabinet while maintaining a clean profile. Features Flared Entry: The stem slot narrows from a 14 mm flared opening down to a 9 mm continuous track, guiding standard stems seamlessly into place. Concealed Mounting: Six countersunk holes with screwdriver access tunnels provide secure upward mounting, hiding the screw heads deep within the block. Support-Free Printing: Engineered to be printed standing vertically on its flat back wall, allowing the internal cavities to form cleanly without the need for support material. Dimensions Overall Footprint: 212 mm wide × 170 mm deep × 22 mm thick. Base Clearance: 82 mm wide internal cavity per channel to accommodate standard glass bases. Stem Track: 9 mm track width, expanding to a 14 mm flare at the front entry.