Advent Calendar With 24 Drawers
Created today
Description
Advent calendar drawers that stick, fuse, or have nothing to grab. Each of the 24 drawers has a rounded finger grip on the front, a numbered face, and 0.5 mm clearance all round, so it slides out freely after printing in place.
Key numbers
- Footprint: 177.5 × 157.5 mm (fits a 180 × 180 mm bed)
- Height: about 49.9 mm including grips
- Layout: 4 columns × 6 rows, printed lying on its back, front facing up
- Drawer interior: 38.5 × 22 × 42.5 mm
- Walls: 1.5 mm; grips 8 × 5 mm, 2.5 mm proud
- Print: white PLA, 0.4 mm nozzle, no supports inside the drawers; the drawer back walls hover 0.4 mm above the frame back, so expect a thin first-layer bridge
Images
More like this
Explore more in Decor & Display →
Christmas Tree Lantern for LED Tealight
A Christmas tree lantern that sits over a battery LED tealight, so the light stays hidden inside instead of glaring from a bare tealight on the table. The walls are perforated with rings of small round holes that throw dots of light, and the bottom is open so the LED can be placed or swapped without taking anything apart. Key numbers Height: about 135 mm including star Base diameter: 90 mm, open underneath (inner opening about 87 mm) Wall: 1.6 mm, three stacked tiers Perforations: 4.2 mm holes, staggered rings Star: separate colour, peg-mounted into the top tier Printing Print upright, open end down, no supports needed for the cone walls Green for the tree, gold or yellow for the star Use a 0.4 mm nozzle; a lighter or translucent filament glows more
整套装配总参考图1800×2400mm Opening Double Door Frame, 1:20
Exploded 1:20 assembly of a hotel automatic double swing door, built for a 90 × 120 mm frame opening (1800 × 2400 mm full size). What it contains Aluminum-style frame: two jambs, head beam and threshold Two glass leaves, 44 × 3 × 118 mm, pulled forward of the frame Top track, motor and two linkage arms lifted above the head Microwave sensor above the track Two infrared photocells moved out to each side Check before printing The 90 × 120 mm opening and 1:20 scale are assumed. Parts are spaced apart for display, not for assembly. Leaf pivot pins and frame sockets are not modelled, so this does not fit a working door mechanism.
Moldura A4 Vertical 250 × 337 mm, Fundo Aberto
Moldura para folha A4 (210 × 297 mm) na vertical, em duas metades unidas por pinos-guia, com a folha entrando por uma fresta na travessa superior. Medidas Externo: 250 × 337 × 15 mm Abertura visível: 202 × 289 mm, lábio frontal de 5 mm Bolso do papel: 212 × 299 mm Fresta superior: 206 mm de largura Fixação e encaixes 4 pinos-guia de Ø5 × 8 mm na metade superior, com alojamentos de Ø5,6 mm na inferior Keyhole para prego: entrada de Ø10 mm e fenda de 4,2 mm, na travessa traseira superior Gancho na borda inferior frontal Verifique antes de imprimir Cada metade mede 250 mm de largura, acima dos 220 mm de uma impressora comum. A traseira é aberta abaixo da travessa do keyhole, então nada segura a folha por trás. Não serve para papel muito fino ou ondulado.
Lamp Bases, Shades and Diffuser Set
A set of mid-century lamp parts that all share one coarse 6 mm-pitch thread, so any shade fits any base. The set has two fluted shades (round and square ribs), a white adjustable diffuser and several bases: tall, short, grooved, two tripods, a flat-leg grooved tripod and a dowel-leg hub. Remix hooks Flat-leg tripod: legs are 16 mm wide slabs (before scaling) with two grooves, 3.2 mm wide, down each outer face. Change the groove count, offset (±4 mm) or width. Leg height and spread: hub height 70 mm and foot radius 70 mm set the splay. Raise both for a taller version. Thread spigot: 52 mm across, 38 mm long. Keep it to stay compatible with the shades. Pairs with: either fluted shade and the diffuser. The 42 mm bore runs straight through for the bulb and cord.
Christmas Tree Lantern with LED Holder
What it's for A Christmas tree lantern with perforated walls that hides a 38 mm battery LED light. A removable twist-lock tray inside the base holds the light, so it stays in the tree when the tree is carried or moved. Dimensions Base diameter: 90 mm, open underneath Total height: about 140 mm including the star Wall thickness: 1.6 mm Light ring: 39.4 mm inside diameter, 6 mm tall Tray: 66 mm disc with three locking lugs Assembly Line the tray lugs up with the gaps between the three tabs inside the wall. Push the tray up past the tabs, turn it about 60°, and lower it onto the tabs. Place the light in the ring. Remix ideas Make the ring taller for a deeper hold. Add a thumb notch to the tray for easier twisting. Change the hole pattern for different light dots.
Visor — Smart Goggles Chassis Set
Visor is a printable smart-goggle chassis kit: a front frame, two hollow temple arms, an electronics box and matching caps, laid out flat for printing. Features Frame with two lens-housing cavities, camera ports and downward sensor holes Hollow arms with speaker slots, USB-C opening and power switch cut-out Electronics box with lipped lid Frame cap: a one-piece back cover with two lips that plug into the eye cavities (0.3 mm clearance per side) Print notes Every piece prints flat without supports. Arms join the frame with 3 mm pins or filament offcuts.