AeroLattice — Mini 3 Prop Guards
Created 4 months ago
Description
AeroLattice brings lightweight, airflow-friendly protection to the DJI Mini 3. Designed to shield propellers from unexpected encounters with trees or obstacles, these guards feature a diamond-lattice structure around the outer ring to minimize weight and aerodynamic drag. A three-spoke support system connects the outer ring to a central friction-fit C-clip at the motor base, providing impact resistance without compromising flight performance.
Dimensions
- Inner Diameter: 100mm
- Clearance: 5mm continuous gap around standard 90mm Mini 3 propellers
Features
- Lattice Cutouts: Diamond pattern reduces mass and allows lateral airflow.
- Mounting: Friction-fit C-clip designed to snap securely around the motor base.
- Support Structure: Tri-spoke design balances rigidity and weight savings.
Images
More like this
Explore more in Automotive, RC & Hobby →
Drone Frame For 8mm Motors
A quad frame for 8 mm motors with a 14 mm wide, lattice-cut camera mount on the top deck. Fitment Motors: 8 mm, in 8.4 mm bore cups. Does not fit 7 mm or 11xx motors without resizing. Camera mount: 14 mm wide extender and slanted plate, with a single vertical wall at the low end and a 7 mm lens hole. Frame: 4 arms, 58 mm guard rings with two curved sticks each, raised deck, hollow pointed legs. Check before printing Measure the camera body width. The 14 mm wall suits only nano-size FPV cameras. Known limits No flight-controller holes in the deck. The camera has no retaining feature. Use a strap or glue.
Vented Acoustic Basket
A skeletal mounting chassis designed to hold a custom 50mm driver assembly. The aggressive cutouts strip away unnecessary mass, leaving four sweeping struts that provide rigid support while entirely opening the rear wave to prevent acoustic reflections. The base houses a precision-cut cavity tailored to scavenged PC fan magnets, complete with a vented central pole piece. Acoustic Details Rear Ventilation: 50-degree windows cut low into the voice coil gap ensure maximum airflow and heat dissipation. Magnet Housing: A 28.5mm OD x 5mm bottom slot sized specifically for standard 120mm fan ring magnets. Mounting Interface: 50mm outer diameter upper ring with a 2mm wall thickness for standard cone attachment.
25mm Tactical Tabletop Tokens
A complete set of nine 25mm wargaming tokens tailored for tabletop tracking. Designed with a clear separation between the base and the raised lettering, making them perfectly suited for a mid-print filament swap or a multi-material system. Specifications Dimensions: 25 mm diameter, 4 mm overall height. Tolerances: The raised text and outer rim sit exactly 1 mm above the base layer, creating a clean Z-height transition for color changes. Printability: No supports required. The bottom edges feature a 1 mm chamfer to prevent elephant-foot distortion on the first layer, ensuring the tokens remain perfectly circular and easy to pick up from flat tables. Layout: Arranged in a flat 3x3 grid for immediate batch printing. Can be split into individual models in the slicer if needed.
Curved Snap-In Interior Trim Cover
A 123 × 180 mm curved interior trim cover with a straight bottom edge, a stepped outline (107 mm wide at the top, 123 mm in the lower 85 mm) and a 3 mm panel. The perimeter flange follows the crowned surface so the part sits flush around the opening. Remix hooks Surface crown: the front curvature is a few millimetres in both directions. Flatten or deepen it to match a measured body profile. Raised area: 10 mm high with a soft ~30 mm blend at the upper left. Change height or width to suit. Clips: five per side at 18, 54, 90, 126 and 162 mm, 14 mm wide and 4.5 mm thick, with a ~2 mm hook. Adjust hook depth to the real metal edge thickness. Rear frame: 15 mm deep, 2.8 mm wall, inset 3.5 mm. Change the inset for a tighter or looser fit. Pairs with: fuzzy skin in the slicer for a textured look. Print in PETG, ASA or ABS.
OO Gauge semi detached house stone v2
A semi-detached stone house pair in OO gauge, printed as separate pieces: front wall with quoins at the outer ends, mitred side walls, a one-piece roof, a floor piece, two chimneys, and separate window and door inserts. Four small locator rails now help position the side-wall tabs on the front wall. Remix hooks Tab locators: four U-shaped pieces, each 6.8 × 18.6 × 1.5 mm. Glue one against the inside of the front wall beside each side-wall tab. The 0.3 mm clearance around the 15 × 5 mm tab is the value to tune for your printer. Locator thickness: 1.5 mm now. Raise it for a firmer stop. Window and door inserts: 3 mm thick, 0.2 mm clearance per side. Pairs well with: a thin plasticard base or a printed street baseboard.
Line Follower Chassis, N20 Drive
What it's for A line-follower chassis plate with N20 motor cradles, an adjustable-height front sensor tray, an ESP32 mount, a battery holder, a driver mount, a rear caster tab and an LED hole. Dimensions Overall: about 130 × 198 mm, under 25 mm tall (the plate sits 8 mm off the ground). Motor cradles: 12.2 × 24.7 mm pocket for a 12 × 10 × 24.5 mm N20, with a shaft notch and two M2 holes each. Wheel cutouts: sized for 34 mm wheels with more than 2 mm clearance to the plate. Sensor tray: 126 × 26 mm board shelf, two vertical M3 slots in the riser for height adjustment. ESP32: four standoffs for a 48 × 26 mm board, plus two zip-tie slots. Battery: 68 × 18 × 19 mm pocket along the axle line, two strap slots. Driver: two zip-tie slots for a 21 × 18 mm module. LED: 5 mm hole near the rear edge. Wiring: two 10 mm slots between the motor mounts and the electronics. Remix ideas Add a cover clamp across each motor cradle using the M2 holes. Change the caster tab hole spacing for a different caster. Add a second sensor tray for a different board width.