Apple Watch Charging Pedestal
Created today
Description
A heavy-base pedestal for an Apple Watch charger, holding the screen at a 45-degree angle for Nightstand mode.
- Open-Slot Routing: The cable channel is open along the entire back of the pedestal and through the bottom. You no longer need to thread the USB plug through a tiny hole—just press the cable right into the groove.
- Fit: 28.5mm recess for the standard magnetic puck.
- Base: Weighted profile measuring 55x75mm to prevent tipping when tapping the screen.
Images
More like this
Explore more in Desk & Tech →
8-Slot PC Cable Comb
A rigid 8-slot cable comb designed to flatten out chaotic PC cable bundles. Spaced precisely for standard 18AWG PSU wires, it includes mounting flanges on either side to pin the whole run tight against a case wall or back panel. Remix Variables Channel Dimensions: Currently set to a 3.5mm width on a 4.5mm pitch. Expand the width to 4mm or higher if you are working with thick sleeved cables. Slot Count: Built for an 8-pin run (like a GPU or EPS cable). Extending the pattern to 24 slots for a 24-pin motherboard main power cable is a straightforward parameter update. Mounting Hardware: The end flanges are drilled for M3 screws with a simple countersink. These can easily be scaled for M4 hardware or removed entirely if you prefer mounting with double-sided tape.
Index Card Desk Sign
A minimalist desktop stand that holds a standard 4x6-inch index card in landscape orientation. The frame is tilted back at 15 degrees for optimal reading from a seated position, and features an open-top U-shape slot so cards can be dropped in or swapped out instantly. No Supports Required: Prints perfectly flat on its base, with the frame angled to avoid steep overhangs on the inner cavity. Drop-In Fit: Sized at 154mm x 103mm internally to easily accommodate standard and slightly oversized cards. 4mm Retaining Lip: Overlaps the bottom and sides of the card just enough to hold it flat without covering your text.
Charging Tower
a
Aura — Minimalist Frame Stand
A minimalist, Scandinavian-inspired phone stand designed to strip away visual bulk while maintaining perfect stability. The aggressive, blocky wedge has been replaced by a light, flowing frame that relies on deep curves and negative space. Features Floating Frame: A wide central cutout reduces the structure to two elegant, 8mm sweeping rails. Organic Silhouette: Deeply rounded outer corners mimic the look of bent plywood or softened aluminum. Maintained Utility: Keeps the exact 45-degree viewing angle and the elongated footprint to fully support larger phones without tipping.
Vertical Dual Laptop Stand
A heavy-duty vertical dock built to hold a work and personal laptop side-by-side on a single desk. By standing the machines on their edges, it drastically cuts their footprint. Pass-through cutouts on the sides provide a direct way to feel the chassis for heat buildup without lifting either machine out of its slot. Remix Hooks Slot Dimensions: The base model uses symmetrical 20mm slots. These are the first parameters to adjust if pairing a slim ultrabook with a thicker workstation. Mass vs. Material: The 15mm center divider, 15mm floor, and 14mm outer walls are sized to provide enough physical weight to prevent two tall machines from tipping. Slimming down the outer walls will save filament but means the stand will likely need double-sided tape to stay anchored. Expansions: The flat outer faces are prime real estate for boolean additions like USB hub mounts, hex-grids, or cable routing channels.
ClipLevel — Light Bar Shims
ClipLevel addresses the common issue of monitor light bars tilting upward on thick-bezel screens, projecting glare directly into your eyes. These custom wedge shims sit under the rear counterweight clip, lifting it by 8mm to pitch the light beam firmly down toward your desk. A built-in front lip hooks over the monitor's top edge to keep everything securely located without adhesive. Dimensions Footprint: 30mm wide by 20mm deep per shim. Lift Angle: Tapers up to an 8mm rise at the rear. Bezel Hook: 5mm front lip to catch the monitor edge. Print Notes Orientation: Print both shims on their flat sides. Supports: Prints entirely support-free.