Made by GlossyTetra
Created 3 days ago
Description
A bare-bones pterosaur-style wing skeleton laid out for printing: left set, mirrored right set and a central mount, all flat on the bed so no supports are needed underneath.
Each wing has a two-axis gimbal shoulder, upper arm, elbow, forearm, wrist plate and five fan ribs, each on its own pin.
Images
A two-up XVIDEOS nameplate set intended as a gift sign for a friend, for desk or shelf display. The model contains two identical horizontal plates, each with a solid black base, a red uppercase “X” at the left, and white “VIDEOS” lettering across the rest of the width. Each plate has a flat back and three underside pockets for 4×2 mm disc magnets. The plates are laid out with a gap and print as two separate pieces. Layout: two identical plates, each 180 × 44.3 mm at about 4.06:1; overall footprint 180 × 99.3 mm with roughly a 10 mm gap; prints as two separate plates. Base: black, 6.5 mm thick, flat back, no supports required. Lettering: single word XVIDEOS, all uppercase; cap height 29.7 mm, about 67% of plate height; text spans about 164 mm with even side margins; heavy geometric sans; letters set tight. Colors: red “X” (#E02A00), white “VIDEOS”, black base; aligned color regions for clean multi-color boundaries. Relief: letters stand about 1.8 mm above the base; raised faces are left square. Magnets: three round pockets per plate, 4.2 mm across × 2.1 mm deep, for 4×2 mm disc magnets; on the long centerline at X = -60, 0 and +60 mm; 120 mm end to end, with the outer pockets 30 mm in from the short ends. Magnet fit: 0.2 mm of play in diameter and depth for a snug fit; about 4.4 mm of base remains above each pocket. Printing: FDM-friendly, flat backside, no supports required.
Emberlink is a segmented dragon built to be bent, curled and twisted in the hand. Eight blocky body links are joined by hinges that alternate between bending sideways and bending up and down, so the whole body can wiggle in any direction. It prints flat as a single piece, with the hinges already working. Features Eight linked body segments with a horned head and a tapered tail Spines along the back Alternating hinge directions for full-body flex Pin hinges with 0.4 mm clearance, designed to print in place Dimensions Roughly 170 mm long and 14 mm wide and tall Print notes Print lying flat, with no supports for the body. Move every joint after printing to break it free. Horns and tail may need light cleanup.
What it's for A flat diamond-shaped panel for signs, inserts, covers or decorative work. Four equal 6 in edges, flat faces. Dimensions Side length: 6 in (152.4 mm), all four sides Long diagonal: 8 in (203.2 mm) Short diagonal: about 8.94 in (227 mm), set by the side and long-diagonal lengths Thickness: 3 mm Remix ideas Add mounting holes at the corners. Round the points for a softer look. Emboss text or a logo on one face. Cut a window to make a frame.
What it's for A pencil-shaped photo frame with a 130.5 × 180.5 mm photo window, a separate back plate, a slotted stand and loose ABC letters with a graduation cap. All pieces are laid out flat and print separately, then get glued or slotted together. Dimensions Frame body: 154 × 196 mm, plus a 12 mm pencil tip, 4.5 mm thick Back plate: 154 × 196 × 1.8 mm Base: 205 × 80 × 10 mm with a 6.8 mm slot Letters: 27 mm tall, 2.5 mm thick Cap: diamond, 30 × 14 × 2.5 mm Graphite tip: 8 mm wide triangle, 1.8 mm thick Remix ideas Swap the letters for a name or initials. Change the photo window size for other print formats. Widen the base slot if the frame and plate stack fits tightly.
What it's for Zwei flache Buchstaben-L als Paar: ein normales L und eine spiegelverkehrte Version. Geeignet für Schablonen, Beschriftungen, Dekoration oder Modellbau. Dimensions Je Buchstabe: 40 mm breit, 102 mm hoch, 1,1 mm dick Strichbreite überall 9 mm Abstand zwischen beiden Buchstaben: 10 mm (gesamt 90 mm breit) Remix ideas Abgerundete Ecken oder Fasen an den Kanten Bohrungen zum Aufhängen oder Verschrauben Dickere Ausführung für mehr Steifigkeit
Toiture creuse de 192 × 103 mm pour une maison de 192 × 101,19 mm, hauteur 40 mm, avec pignons fermés percés chacun d'une fenêtre à 4 carreaux alignés. À vérifier avant impression Largeur de la maison : 101,19 mm (le toit déborde d'environ 0,9 mm de chaque côté). Longueur : 192 mm, pignons affleurant les murs. Caractéristiques Coque de 2,5 mm, dessous ouvert. Motif de briques sur les deux pentes. Demi-gouttières Ø3 mm ouvertes vers le haut. Fenêtres : 4 carreaux de 6 × 8 mm, montants de 2 mm. Incompatibilités Aucun ergot ni emboîtement : le toit se colle ou se maintient sur les murs.