Baton Handle Prop for Holster
Created today
Description
A plain baton handle for filling an empty baton holster, so the holster doesn't look vacant. No shaft sticks out of the end, and the surface has no ridges to catch on the holster lining.
Dimensions and printing
- Diameter: 1 in (25.4 mm), the dimension that decides whether it fits the holster mouth
- Length: 7 in (177.8 mm)
- Ends: 2 mm chamfer on both ends so neither edge snags going in
- Print: solid, lying flat on the bed; no supports are needed for the cylinder
- Prop only: it does not extend or collapse
Images
More like this
Explore more in Decor & Display →
Cursive Home Neon Strip Holder
A cursive "Home" sign form with an open channel running through every letter, made for pressing flexible LED neon strip into place. Fill the channel, wire it up, and the script shape glows like a custom neon sign. Script lettering in a heavy brush style, roughly 80 mm letter height 1.6 mm walls around an open top channel 2 mm floor, 10 mm overall height Prints flat with no supports Print it in white or black depending on how you want the unlit sign to look. Strip width differs between brands, so check the channel width against your strip before printing.
Printytron 3-Layer Logo Sign 150mm
A flat logo sign reading "Printytron" in bold monospace lettering, built as three stacked 1 mm layers so a multi-color printer needs only three filament changes. Layer 1 (Z 0–1 mm): yellow 150 x 31 mm background plate Layer 2 (Z 1–2 mm): blue drop shadow, offset 1.2 mm right and down Layer 3 (Z 2–3 mm): pink lettering Total height: 3 mm Blue layer includes the letter footprint so the pink layer is fully supported No supports needed
Halloween Gravestone Trophy V4
A Halloween trophy gravestone that prints as separate pieces, because a single-colour solid block makes white lettering and a skull impossible. The black stone and pedestal print in black PLA. The skull, webs, bats, cross and lettering print in white PLA and plug into sockets in the stone, so nothing relies on glue alone for position. Numbers that decide fit Assembled size: about 160 mm tall, 90 mm wide, 35 mm deep (pedestal 90 × 35 × 22 mm; stone 80 × 18 mm, arch radius 40 mm). Stone-to-pedestal joint: two rectangular tenons, 8 × 10 mm and 12 mm long, at offset positions so the stone only goes in one way. Pedestal holes are 8.5 × 10.5 mm and 14 mm deep, leaving 2 mm of glue space. Small parts: 2.8 mm pegs, 4 mm long, with chamfered tips. Sockets are 3.1 mm wide and 5 mm deep. Lettering: three word plates (BEST VILLAIN, HALLOWEEN NIGHT, WROCŁAW • 24.10.2026). Each has a 1.2 mm backing plate that sits in a recess, letters raised 1.8 mm and two pegs. Surface: chipped edges and cracks are modelled into the stone. Printing Stone: print it back-down, flat. Pedestal: print it upside-down or bottom-down. No supports are needed for either. White parts: print the lettering face-down, with the pegs pointing up. Print the skull, webs, bats and cross back-down. The model includes an assembled view and an exploded view. Each white part sits on its own socket pattern. Assembly: fit the tenons into the pedestal, glue them, then press each white piece into its sockets and glue.
Halloween Gravestone Trophy, Glue-Together Kit
A Halloween trophy gravestone that prints as separate pieces, because a single-colour solid block makes white lettering and a skull impossible. The black stone and pedestal print in black PLA. The skull, webs, bats, cross and lettering print in white PLA and plug into sockets in the stone, so nothing relies on glue alone for position. Numbers that decide fit Assembled size: about 160 mm tall, 90 mm wide, 35 mm deep (pedestal 90 × 35 × 22 mm; stone 80 × 18 mm, arch radius 40 mm). Stone-to-pedestal joint: two rectangular tenons, 8 × 10 mm and 12 mm long, at offset positions so the stone only goes in one way. Pedestal holes are 8.5 × 10.5 mm and 14 mm deep, leaving 2 mm of glue space. Small parts: 2.8 mm pegs, 4 mm long, with chamfered tips. Sockets are 3.1 mm wide and 5 mm deep. Lettering: three word plates (BEST VILLAIN, HALLOWEEN NIGHT, WROCŁAW • 24.10.2026). Each has a 1.2 mm backing plate that sits in a recess, letters raised 1.8 mm and two pegs. Surface: chipped edges and cracks are modelled into the stone. Printing Stone: print it back-down, flat. Pedestal: print it upside-down or bottom-down. No supports are needed for either. White parts: print the lettering face-down, with the pegs pointing up. Print the skull, webs, bats and cross back-down. The model includes an assembled view and an exploded view. Each white part sits on its own socket pattern. Assembly: fit the tenons into the pedestal, glue them, then press each white piece into its sockets and glue.
Welcome — Cursive Neon Strip Holder
Welcome is a script-lettered sign form with an open channel running through every letter, built for pressing flexible LED neon strip into place. Fill the channel, wire it up, and the flowing lettering glows like a custom neon sign. Features Heavy brush-style "Welcome" lettering 1.6 mm walls around an open top channel 2 mm floor, 10 mm overall height Wire exit holes through the floor at the ends of the word Print notes Prints flat with no supports Strip width varies by brand, so check the channel width against your strip first
Faceted 80mm LED Tealight Lantern
A faceted 80mm cube lantern designed to slip over a standard LED tea light. The outer shell features a repeating triangular lattice that casts geometric light patterns on surrounding surfaces, providing mood lighting without an open flame. Dimensions: 80 x 80 x 80 mm overall footprint with heavy chamfered edges. Fitment: Features a 39.5 mm bottom recess to comfortably clear standard 38 mm LED tea lights. Printability: All triangular apertures are oriented apex-up to act as self-supporting overhangs, requiring zero support material during printing. Safety: Designed exclusively for use with battery-operated LED units; not suitable for real flames.