Single-Colour Raised Text Visitor Pass
Created today
Description
A 110 × 70 mm visitor pass with a 1.2 mm plate and bold raised lettering standing 0.6 mm proud, 1.8 mm total. It prints flat-side down in one colour with no supports.
Remix hooks
- Text sizes: 6.5 mm for the school lines and 7.5 mm for VISITOR PASS. Raise them for a bolder look, but keep 4 mm of edge clearance.
- Plate thickness: 1.2 mm. Thicker gives a stiffer card, though the total height rises with it.
- Relief height: 0.6 mm. Match it to your layer height, for example 3 layers at 0.2 mm.
- Pairs with: a lanyard slot or clip tab added at one end.
Images
More like this
Explore more in Gifts, Seasonal & Personalized →
110×70 mm Himalaya School Visitor Pass
Two-body visitor pass for Himalaya Public Sr. Sec. School: a white 110 × 70 × 4 mm plate with 3 mm corner radius, and solid dark-blue raised lettering. Fit and dimensions Plate: 110 × 70 × 4 mm, rounded corners. Letters: 2 mm proud of the plate, flat bottoms seated on the top face (overall height 6 mm). Text: HIMALAYA PUBLIC / SR. SEC. SCHOOL / VISITOR PASS, centred, well inside the 4 mm margin. Check before printing Confirm the text stays within 4 mm of every edge in your slicer. Assign the white and blue bodies to separate filaments. There is no hole or lanyard slot.
Jennifer — Two-Colour Baptism Cake Topper
Jennifer is a two-colour baptism cake topper with a slim Latin cross, a laurel wreath ring, the name in flowing script, a curved Baptism banner and a pointed stake for the cake. Features Slim Latin cross with a long stem, shorter crossbar and ivory inset Gold ring with mirrored leafy branches Ivory "Jennifer" script connected to the ring by thin bars Curved banner with evenly spaced raised "Baptism" letters Pointed stake; wrap it in food-safe film or a cake dowel before use Print notes Designed for two-colour printing in gold and ivory Base 1.6 mm, raised details up to 2.8 mm (banner letters 4.1 mm)
Luggage Strap Tag, 5 mm Slot, STEVE
A 90 × 50 × 3 mm luggage tag with a 5 × 22 mm strap slot and the name STEVE raised inside a recessed label panel. Fitment Fits straps up to 5 mm thick through the 22 mm-wide slot. Does not fit wide or double-layer straps, or standard key rings without a loop. Measure the strap thickness before printing; the slot is 5 mm. The lettering stands 0.9 mm proud of the panel floor and sits below the tag's top surface, so it is protected from rubbing.
150mm Bayonet Twist Vault
A 150mm mechanical drop-in vault, built around a 50mm twist-lift track. This replaces the friction fit of the original 150mm Borg Friendship Vault with a proper bayonet mechanism. The outer cage runs three 18mm tall helical tracks to guide the core. The top cap terminates in a 40mm hexagonal drive plug; dropping it onto the core and twisting counter-clockwise forces the payload to lift 50mm out of the chassis. Bore Clearance: The 98mm core runs inside a 102mm cage bore. Verify your machine holds tolerances on large cylinders. Support-Free: The massive 90mm flat bridges of the original have been replaced by mechanical vertical slots with 45-degree angled roofs. No supports needed for the cage or core lugs. Payload Capacity: The hollow inner void measures 76mm in diameter by 110mm deep. To assemble, line up the core lugs with the vertical entry slots on the inner walls of the cage, push down to the top stop, and twist right to lock it securely to the bottom.
Hartvormige fotolijst voor oma
Hartvormige fotolijst ontworpen rondom de standaardafmeting van een 10x15 cm foto. De lijst bevat verhoogde details zoals bloemen, kleine hartjes en de tekst in het Satisfy-lettertype. Omdat reguliere emoji's niet naar gcode vertalen, is het hartje in de tekst vervangen door een massief 3D-element. Constructie en Printen De Sponning: Aan de achterkant zit een uitsparing van exact 104x154 mm. Dit geeft rondom 2 mm speling voor de foto, plus de 3 mm dikke rugplaat. Ondersteuning: Print het hoofdframe plat op zijn rug. Voor de sponning van de foto is in de slicer een beetje "support" (ondersteuning) vereist. Montage: De rugplaat klemt strak in het frame. De losse standaard schuift onder een hoek van 45 graden in de rugplaat. Gebruik eventueel een klein beetje tape of lijm als de frictie van je print niet strak genoeg is.
Bracelet Octobre Rose 78mm
Un bracelet jonc simple et élégant, gravé du texte "OCTOBRE ROSE" en creux pour marquer l'événement sans nécessiter d'impression multicolore. Diamètre intérieur : 78 mm (ajusté pour un enfilage confortable) Épaisseur de paroi : 3 mm Hauteur : 12 mm Gravure : Découpée dans la paroi extérieure Impression : Conçu pour s'imprimer à plat sans aucun support