Bunk Bed Rail Step
Created 7 days ago
Description
Standing barefoot on a 25mm rail drives all your weight into a very thin line. This sleeves directly over the existing ladder rail, giving a wide, flat, treaded surface that doesn't bruise the arches of your feet when you climb.
Dimensions & Setup
- Rail Fit: 25.5mm internal channel (drops cleanly onto a 25mm rail).
- Platform: 140mm wide by 75mm deep.
- Load Bearing: 10mm solid ceiling above the rail.
- Printing: Needs heavy perimeters (5+) and dense infill (40%+) to safely take a foot's weight without shearing.
Images
More like this
Explore more in Home & Fixtures →
40mm Stud Mount Coat Hook
A robust coat hook designed for direct anchoring into a standard wooden wall stud. The angled peg provides substantial clearance for heavy fabrics, while the backplate keeps the mounting hardware strictly inline for reliable engagement with a single structural member. Fitment & Installation: Mounting Interface: Two countersunk mounting holes spaced exactly 40mm apart on the vertical axis. Fastener Compatibility: Sized to accept standard #8 wood or drywall screws. The countersink depth ensures the screw heads seat entirely flush beneath the surface, preventing snags on coat collars. Clearance: The lower hook geometry is offset to allow straight-line access for a standard driver bit during installation.
35x45mm Caster Wheel Brake
A heavy-wall retaining cup built to anchor rolling AC units and stop casters from wandering. Sized specifically for the caster drop-in footprint. Check your wheels before printing. Fitment Accommodates: Casters up to 35mm wide and 45mm long. Depth: 16mm of internal retaining depth (20mm overall minus a 4mm solid base). Wall: 4mm perimeter thickness to withstand machine weight without splitting.
110mm Hex-Mesh Planter Pot
A tapered cover pot designed for standard 12cm nursery planters. The base and walls feature a staggered hexagonal mesh that promotes extensive airflow and rapid drainage. Dimensions: 150mm outer top diameter, 140mm inner top, tapering to fit a 120mm base. Total height is 120mm. Printability: The wall hexagons are rotated so their corners point straight up, yielding sharp 60-degree overhangs that print perfectly without supports. Durability: Uniform 5mm walls provide rigidity even with the extensive mesh cutouts.
BSP 3/4 to 3/4 Hose Barb
An adapter coupling designed to step straight from a 3/4" BSP threaded fixture to a heavy hose. The hex nut transition is chamfered for support-free printing when oriented barb-down on the build plate. Dimensions & Fit Thread: 3/4" BSP (26.4mm OD, 14 TPI) Barb: 21.2mm maximum outer diameter (5-stage reversed taper) Bore: Steps from 20mm at the threaded end down to 14mm at the barb to maximize flow rate. Wrench Flats: ~31mm flat-to-flat Printing: Print barb-side down; no supports required.
Structural L-Bracket
Joints flex and shelves droop when gravity gets a say. This stops that. A blunt, rigid corner bracket with an inner chamfer that prevents the corner from tearing under load. Specs Arms: 50mm (outer length) Thickness: 4mm Width: 20mm Mounting: Two 5mm through-holes centered on the flat sections. Print this on its side (the flat L shape against the bed) so the layer lines run continuously along the bend. That prevents snapping.