C and 9V Storage Adapters
Created 1 months ago
Description
Drops directly into standard C-cell and 9V battery slots. Adapts the bore to hold a single CR2 cell securely for storage purposes only. Does not include electrical contacts.
Fitment Notes
- C-Cell Profile: 26.2mm outer diameter.
- 9V Profile: 26.5mm x 17.5mm footprint.
- CR2 Bore: 16.2mm diameter, 15mm depth. This leaves approximately 12mm of a standard CR2 battery exposed for easy retrieval.
- Clearance Check: The 9V adapter relies on a 0.65mm side wall around the bore. Ensure your printer's extrusion multiplier is calibrated for thin walls.
Images
More like this
Explore more in Storage & Organization →
Cat Head Box
Une boîte de rangement simple reprenant la silhouette d'une tête de chat, conçue pour s'imprimer sans supports. Structure : Base creuse de 40 mm de haut avec des parois de 2 mm. Couvercle : S'emboîte via une lèvre interne, avec un jeu de 0.4 mm pour un ajustement facile. Impression : Le couvercle est déjà orienté face plate vers le plateau d'impression.
Magnetic Enclosure Storage Box
A robust two-piece enclosure designed around magnetic closures and standard 100x145x30mm internal storage requirements. Remix Hooks Wall Thickness: Set to 6mm to ensure the 4mm corner magnets have plenty of structural meat on both sides. Registration Lip: The lid features an inset lip with 0.3mm clearance to keep the halves aligned—the magnets just pull it shut, they don't have to fight shear forces. Bottom Magnets: 7mm diameter cutouts are positioned underneath for docking or stacking. Adjust their X/Y offsets if you're matching a specific grid plate.
Ühe Otsaga Suletud Sahtlikarp
Sahtel kiilub kinni, sest pole kuskilt korralikult kinni võtta. See on suletud tagaseinaga lihtne kest, millel on nüüd sahtli ees korralik väike näpu-kõrgendus, et seda saaks mugavalt ja ilma küüsi murdmata välja tõmmata. Mahutavus: Täpselt 200 × 50 × 50 mm kasulikku ruumi. Seinad: 1.5 mm, prinditav ilma tugedeta. Liikumisruum: 0.5 mm lõtk külgedel tagab sujuva liugumise.
Low-Profile Reeded Catchall Tray
A wide, low-profile oval catchall tray featuring a seamless ribbed exterior and a smooth inner basin. Dimensions: 200mm × 100mm × 22mm Wall Thickness: 5mm (with 5mm continuous exterior ribs) Floor Thickness: 5mm Use Case: Keys, loose hardware, or desk accessories. The shallow walls make it easy to reach in and grab small items.
VoltGrid — Print-in-Place Battery Case
A high-capacity, print-in-place storage case holding 104 AA batteries in a skeletal, material-saving grid. Designed specifically for FDM printing without supports. Features Zero Assembly: Prints flat with a fully integrated, captive 45-degree cone hinge mechanism. Just pop it off the bed and fold it closed. Skeletal Organizer: The lower grid provides 0.4 mm of clearance for 14.5 mm diameter AA batteries, but uses open walls to drastically cut filament usage and print time compared to solid block designs. Snap Latch: A flexible cantilever tab locks the lid securely down over a heavy chamfered ledge on the bottom box. Dimensions Flat Printing Footprint: 228 mm × 292 mm Closed Dimensions: 228 mm (W) × 142 mm (D) × 60 mm (H) Capacity: 104 cells (13 × 8 grid)
150mm Borg Friendship Vault
Zak's Borg Friendship Vault. Three-piece print, designed to drop in and seat clean without fasteners. Overall Footprint: 150mm x 150mm. Total Height (Assembled): 145mm. Internal Payload Bore: 65mm diameter x 105mm depth. Cage Windows: 90mm span, designed to bridge flat across the top without support on well-calibrated machines. The top cap runs a 118mm square boss to locate itself on the outer frame, plus a 64.5mm cylindrical plug to lock into the core and prevent horizontal slop. Print the outer cage and cap in black PETG; run the core in fluorescent PLA. Keep your cooling aggressive for the long window bridges.