Cartel Currency Stack
Created today
Description
A solid brick of unapologetic paper wealth, banded together for easy transport. Modeled after the footprint of standard US currency, this thick stack makes a perfect paperweight, a prop for your next heist short film, or a heavy-duty desk flex.
Bank Notes
- Dimensions: Roughly 156mm × 66mm — true to a standard dollar bill footprint.
- Printability: Sits flat on the build plate. No supports required.
- Customization: Swap filament colors at the 20.5mm mark to make the strap and the dollar sign pop against the stack.
Images
More like this
Explore more in Decor & Display →
Aerocord — Wire Heart Frame
A smooth, continuous 10mm tubular loop mathematically traced into a classic heart shape, scaled to a full 20cm span. Ideal as a minimalist wall piece, a wreath frame, or a standalone desk feature. Dimensions Width: 200 mm Cord Diameter: 10 mm Overall Profile: Sits flat with a 10 mm Z-height Features Continuous Sweep: A closed tubular loop with no hard joints. Classic Proportions: Driven by standard parametric heart equations for a familiar, balanced shape. Ready to Print: Sits perfectly flat on the bed, requiring zero supports.
FLAGE MAROCAINE
A precisely dimensioned 180x120mm base for a Moroccan flag assembly. The model features an accurate 1mm-deep recess carved as five intersecting straight lines, capturing the true geometry of the traditional interlaced pentagram. Through-holes at the five intersecting tips provide exact alignment for a matching drop-in star, while doubling as push-out points if the star needs to be removed after test-fitting. Specifications Dimensions: 180 mm x 120 mm x 3 mm Recess Depth: 1.0 mm (maintains a 2 mm solid floor) Alignment: Five 2.4 mm diameter positioning through-holes Print Settings: Prints flat on its back; no supports required
iPad Picture Frame Adapter Rödlam 21x30
A two-part adapter plate that centers a 5th Generation iPad (9.7") inside an IKEA RÖDALM frame. It acts as a solid backing spacer, locking the tablet into the frame body while providing a cutout exactly the size of the active screen. The split design fits on a standard 220mm print bed and joins with simple flat printed tabs, avoiding overhangs entirely. Remixing and Adjustments Screen Cutout: Currently set to 197 × 148 mm. If you swap to an iPad with a different bezel ratio, you can adjust these dimensions to crop it cleanly. Frame Depth: The total block depth is 30 mm. Thinner frames will require cutting down the outer block height. Cable Routing: A 16 × 25 mm rear channel provides plenty of clearance for bulky aftermarket Lightning cables. Joints: Uses simple 11 × 14 mm rectangular biscuits. You can easily scale these or add more pairs for extra rigidity depending on your printer's tolerances.
HELLO Name Sign, 112 x 36 mm
Desk or shelf name sign with raised bold HELLO lettering on a flat rounded-corner base plate. Letters are set in a heavy sans-serif so strokes stay thick enough to print cleanly. Plate: 112 x 36 x 3 mm, rounded corners Letters: 4 mm raised, Archivo Black, 22 mm cap size Print flat, no supports needed Two colour regions: plate and lettering, suited to a filament change at 3 mm Material: PLA or PETG
Flat-Print A4 Picture Frame
A clean, single-piece A4 picture frame designed to print flat on large beds (like 360x360mm). It prints face-down to ensure a smooth front finish and requires zero supports. Integrated Keyholes: Built-in flush mounts for both portrait and landscape orientation. Drop-in Retainers: Six small twist-clips print alongside the frame in the empty center space. They drop into the pre-drilled holes on the back to lock your paper and cardboard backing firmly in place. Generous Recess: The back channel allows up to 2.5mm of clearance, leaving plenty of room for standard A4 paper paired with a corrugated cardboard or stiff card backing.
Nelore BCS Display Base
What it's for A structured, segmented display base designed to present five cattle models demonstrating Body Condition Scores (BCS). Features an elegant multi-tiered design with distinct angled platforms, giving each figure a dedicated presentation space without structural clutter. Dimensions Overall footprint: 400 mm length x 100 mm width. Total height: 20 mm (10 mm main base, 5 mm middle tier, 5 mm individual platforms). Display pads: 65 mm x 40 mm, offset at a 25-degree angle. Split halves: 200 mm length each, designed to fit cleanly on standard 256x256 mm print beds. Print notes Orientation: Print both base halves flat on their bottoms. Print the pegs horizontally as oriented in the file for maximum shear strength across the layer lines. Clearances: The dowel holes are 8.4 mm with 8.0 mm pegs. This 0.2 mm radial clearance is generous enough for easy assembly straight off a standard FDM printer, but tight enough to hold firmly with CA glue. Supports: None required. All chamfers and geometries are optimized for direct bed printing.