Cloud Security Padlock Desk Ornament
Created today
Description
A cloud-shaped ornament with a padlock raised on the front, so the cloud-security symbol sits flat and upright instead of tipping over on a desk or shelf.
The cloud has rounded puffs and a flat underside. The padlock is welded to the front face, so nothing floats or snaps off. The shackle is thick, and the keyhole is cut into the lock body.
- Cloud: about 100 mm wide, roughly 60 mm tall, 16 mm thick
- Padlock: 28 mm wide body, 5 mm thick shackle, raised about 7 mm off the cloud
- Print: flat bottom down, no supports needed, 0.2 mm layers, 3 or more perimeters
- Single colour, one solid body
Images
More like this
Explore more in Decor & Display →
witek1
A three-disk stacked cylinder, the standard database symbol, as a desk ornament or sign element. Disks are 50 mm across and 14 mm tall with 3 mm grooves, joined by a 42 mm core, and a thin cap sits on top. Remix hooks Disk count (n = 3): raise it for a taller stack, or drop to 2 for a compact version. Groove gap (3 mm): widen it for stronger shadow lines, or set it to 0 for a solid can. Diameter (50 mm) and disk height (14 mm): scale both for a keychain or a coaster-sized piece. Pairs with: a flat base plate with a label, or a magnet pocket in the bottom for a fridge version.
5mm Bore Heart Ornament
A flat-backed ornamental plate. The critical interface here is the 5 mm through-hole at the top dead centre — check the gauge of your hanging hooks or ribbon before running the file. Overall Dimensions: 70 mm width, 70 mm height, 3.8 mm total thickness. Base Plate: 3.0 mm thick, solid manifold for FDM. Raised Pattern: 0.8 mm extrusion above the base surface. Bore: 5.0 mm diameter. Lays entirely flat on the bed. No supports required.
Sonderkerzen 1.0
Ein hohler, zylindrischer Kerzenkörper für den 3D-Druck, der eine brennende Kerze simuliert. Das Modell verfügt über realistische Wachstropfen an der Außenseite und einen unregelmäßig geschmolzenen oberen Rand, ohne die vorgegebenen technischen Maße zu beeinträchtigen. Dimensions Gesamthöhe: 120 mm Durchmesser: 43 mm (außen, exklusive Wachstropfen), 37 mm (innen) Bodenstärke: 3 mm Bohrungen: Vier 1-mm-Löcher auf Höhe Z=104 (16 mm unter dem Rand), kreuzförmig angeordnet Print notes Die Wachsstruktur ist so gestaltet, dass sie ohne Stützstrukturen (Supports) druckbar sein sollte. Die feinen 1-mm-Löcher erfordern einen gut kalibrierten Drucker und ggf. eine niedrige Schichthöhe, um nicht vom Slicer ignoriert zu werden.
5 Resin Bookmark Mold
An open-face silicone-free printed mold block with five rounded-end bookmark cavities side by side. Overall size is 175 × 145 × 6 mm, so it fits most print beds. Each cavity has fully semicircular ends, a shallow inner recess, and a small peg near the top that forms the tassel hole. Pour resin to the rim and level the mold while it cures. Overall size: 175 × 145 × 6 mm Five cavities, each about 30 × 137 mm Peg for a 5 mm tassel hole in every cavity Prints flat, no supports needed Apply mold release before casting
Pepper's Ghost Enclosure
A three-part optical illusion experiment utilizing the Pepper's Ghost principle. The enclosure uses ambient light and a clear sheet of recycled plastic to project a reflection of a small figure, making it appear to float inside the dark interior. Specifications Illusion mechanism: Forward-leaning plastic reflects the illuminated floor pedestal into the viewer's direct line of sight. Adjustability: Slide-in stage features 1.2mm grooves at 35, 45, and 55 degrees to tune the reflection angle depending on the viewer's height. Assembly: Snap-fit front bezel holds the stage in place. No screws or glue required. Printing: All three pieces are designed to print flat without supports. In your slicer, split the model into objects and lay the main enclosure on its back.
Gothic Gravestone Villain Trophy
What it's for A robust, display-ready Gothic gravestone trophy designed to award the best villain of the night. The piece is styled as a weathered cemetery monument on a heavy plinth, decorated with a prominent central skull, gothic bat silhouettes, and spiderwebs anchoring the upper arch. The text is physically raised from the stone face, providing sharp contrast and high readability. Dimensions Overall size: 90 mm wide, 160 mm tall, 35 mm deep. Base: 90 mm × 35 mm, forming a stable 20 mm thick foundation. Text and details: Extruded 1 mm past the main surface to ensure crisp layer lines. Print notes Designed for dual-color FDM printing. The geometry is fully manifold and structured so that the raised white details (the skull, webs, bats, and text) all align precisely on the forward Z-plane if laid flat. Orientation: The model generates standing upright for preview purposes. For FDM, rotate it 90 degrees backwards in your slicer so the text points straight up. Color swap: When printed flat on its back, simply schedule a filament change at the layer where the lettering begins to switch from black to white. No MMU or AMS is required. Supports: None needed if printed flat on its back.