Connected "Eleven" Script Sign
Created today
Description
A freestanding or mountable word sign featuring the word "eleven" written in a flowing cursive script. The lettering uses tightened character spacing to ensure all characters overlap continuously, making it printable as a single, unified plastic piece without the need for a backing board.
- Continuous Flow: All letters connect to form one unbroken piece.
- 4mm Thickness: Provides enough rigidity for handling or mounting while keeping print time low.
- Flat Base: Generates perfectly flat on the build plate for easy adhesion.
Images
More like this
Explore more in Decor & Display →
Curved Script Chili Sign
A solid-backed, flat-printing chili pepper display sign styled like a vintage embroidered restaurant logo. The lettering is wrapped along a shallow crescent arc using a flowing, connected script font, layered with a dark stepped outline to give it a physical embroidered look. Everything sits flush on the Z=0 plane for easy multi-color filament swapping on any FDM printer. Remix Hooks The Curve Radius: The text is mapped along an arc with a 200 mm radius. Dropping that to 150 mm gives a much steeper smile, while pushing it to 300 mm flattens it out. Text Spacing: The script kerning is tied to a custom letter spacing offset. Adjusting this tightens or spreads the cursive connections. Outline Depth: The dark outline is offset by 1.5 mm. Bump that up for a thicker border.
HELLO Name Sign, 112 x 36 mm
Desk or shelf name sign with raised bold HELLO lettering on a flat rounded-corner base plate. Letters are set in a heavy sans-serif so strokes stay thick enough to print cleanly. Plate: 112 x 36 x 3 mm, rounded corners Letters: 4 mm raised, Archivo Black, 22 mm cap size Print flat, no supports needed Two colour regions: plate and lettering, suited to a filament change at 3 mm Material: PLA or PETG
Cursive Home Neon Strip Holder
A cursive "Home" sign form with an open channel running through every letter, made for pressing flexible LED neon strip into place. Fill the channel, wire it up, and the script shape glows like a custom neon sign. Script lettering in a heavy brush style, roughly 80 mm letter height 1.6 mm walls around an open top channel 2 mm floor, 10 mm overall height Prints flat with no supports Print it in white or black depending on how you want the unlit sign to look. Strip width differs between brands, so check the channel width against your strip before printing.
Zero Talent Motivational Wall Plaque
A minimalist, multi-color printable wall plaque featuring the popular motivational list "Ten Things That Require Zero Talent". Designed strictly to the 180×240mm proportions requested, the plaque is split into distinct printable regions that allow for easy AMS filament mapping in standard slicers like Bambu Studio. Printing Specifications Size: 180 mm × 240 mm × 3.6 mm Layout: Flat backing suitable for mounting tape. Colors: Separated into three distinct mesh regions: a mauve-gray top header block, a charcoal main block, and stark white raised text and dividers. Details: 0.6 mm raised elements optimized for standard 0.4 mm nozzles without needing fine-tuning or supports.
Helix — Open-Frame Twisted Fin Lamp Shade
Helix is a flared lamp shade with no solid wall. 72 thin fins spiral through a 60° twist as the shade widens from the base to the top, and three low reinforcing rings hold the whole frame together. The result reads like a lantern or woven cage, and the light comes through as spiralling slats of shadow. The fins and rings are matched on purpose: each fin reaches inward only as far as the rings do, so the inner edge stays clean from bottom to top. A small spoked fitter ring at the base seats the shade over a lamp holder. Dimensions Height: 130 mm Base diameter: about 90 mm Top diameter: about 140 mm Twist: 60° over the full height Features 72 twisted, flared fins, 1.2 mm thick Three low-profile rings at the bottom, middle and top, 3.5 mm tall Fin depth matched to the ring depth (about 6.6 mm at the base, scaling with the flare) Spoked fitter ring at the base, 3 mm tall Print notes Print upright with the fitter ring on the plate. Slow speeds help, since the fins are thin. Use a cool LED bulb only. Fit to a specific socket is untested, so check the fitter ring against your holder.
SMG-11 — Red Dot Machine Pistol Replica
SMG-11 is a life-size, non-functional display replica of the compact machine pistol from Rainbow Six Siege, built in the MAC-11 pattern. The magazine is a separate piece that slides out of a real well in the grip, and a rail-mounted red dot sight sits on top. Features Removable magazine with baseplate, feed lips, catch notch and witness holes Grip with mag well, side texturing, mag release button, trigger and trigger guard Boxy receiver with ejection port, side serrations, safety lever and front sling loop Grooved barrel with muzzle ring Top rail with cross slots, front sight with ears and cocking knob Red dot sight with housing, turrets, battery cap, lens and dot Open wire stock Print notes Overall length is about 280 mm with the stock, so it needs a large bed or splitting into sections. Print the magazine separately, baseplate down. The well has about 0.3 mm clearance per side. Wire stock rods may need supports. Display piece only; it has no working mechanism.