Custom Hex Standoff Tube
Created today
Description
Off-the-shelf hardware never matches the exact gap, leaving assemblies rattling or crushed. This custom hex standoff fills the exact space needed while keeping the internal bore clear for a rod or bolt to pass through.
Dimensions
- Height: 55.0 mm (5.5 cm)
- Outer Profile: 5.15 mm point-to-point hexagon
- Inner Bore: 2.50 mm diameter
Images
More like this
Explore more in Workshop & Tools →
Bullone M8x30 Testa Quadrata e Dado
Bullone M8x30 con testa quadrata da 23 x 23 mm e spessore 3 mm, abbinato a un dado esagonale M8 con filettatura reale. I due pezzi si stampano separati. Gambo: M8, passo 1,25 mm, filettato per l'intera lunghezza di 30 mm Testa: quadrata 23 x 23 mm, spessore 3 mm Dado: M8, spessore 6,5 mm, 13 mm tra le facce Tolleranze: 6g per il bullone, 6H per il dado Stampa: testa del bullone appoggiata sul piano consigliata, dado con asse verticale
Industrial Pull Plate
A heavy-duty mounting plate featuring an integrated pull tab and precise counterbored holes. Designed for easy handling and a flush fit with socket head hardware. Mounting Interface: 4x 4.3mm thru-holes with 6.5mm counterbores (4mm deep) Spacing: 72mm x 40mm pattern Convenience: Rounded 35mm pull tab with a 10mm grip hole
door lock
Rectangular block, 100 mm long, 24 mm wide and 15 mm tall, with a 16 mm wide by 11 mm deep groove running the full length along the top centre. The groove size is engraved into the groove floor as "16 x 11 mm". Overall size: 100 x 24 x 15 mm Groove: 16 mm wide x 11 mm deep, open at both ends Side walls: 4 mm; floor: 4 mm Engraving: 0.6 mm deep, readable from above Prints flat with no supports
outside hat
A plain flat disc in the spirit of an oversized washer or a vinyl-record blank: 3 inches across, 1/8 inch thick, with a clean 1 cm hole through the centre. Prints flat with no supports. Diameter: 76.2 mm (3 in) Thickness: 3.175 mm (1/8 in) Centre hole: 10 mm Good for spacers, coasters, templates, or as a base for other builds
Precision Rectangular Spacer Frame
Ein präziser, flacher Rechteckrahmen mit zentriertem Ausschnitt. Das Profil eignet sich gut als Abstandshalter, Passepartout oder Montage-Shim. Außenmaße: 39 × 30 mm Dicke: 3 mm Ausschnitt: 29 × 25 mm (mittig) Wandstärken: 2,5 mm seitlich, 5 mm an den Enden
