Cutaway Gearbox Desk Display
Created today
Description
A cutaway gearbox in the spirit of a museum engineering sectional: a boxy housing with the front and top sliced open so the meshing gears and cross shafts sit in plain view.
- Two spur gears (14 and 22 teeth) on 6 mm shafts
- Open front and top reveal the mesh
- Shafts pass through the housing sides
- Flat base plate for stable desk display
Pairs well with a small crank on one shaft.
Images
More like this
Explore more in Decor & Display →
SMG-11 — Red Dot Machine Pistol Replica
SMG-11 is a life-size, non-functional display replica of the compact machine pistol from Rainbow Six Siege, built in the MAC-11 pattern. The magazine is a separate piece that slides out of a real well in the grip, and a rail-mounted red dot sight sits on top. Features Removable magazine with baseplate, feed lips, catch notch and witness holes Grip with mag well, side texturing, mag release button, trigger and trigger guard Boxy receiver with ejection port, side serrations, safety lever and front sling loop Grooved barrel with muzzle ring Top rail with cross slots, front sight with ears and cocking knob Red dot sight with housing, turrets, battery cap, lens and dot Open wire stock Print notes Overall length is about 280 mm with the stock, so it needs a large bed or splitting into sections. Print the magazine separately, baseplate down. The well has about 0.3 mm clearance per side. Wire stock rods may need supports. Display piece only; it has no working mechanism.
Cloud Security Padlock Desk Ornament
A cloud-shaped ornament with a padlock raised on the front, so the cloud-security symbol sits flat and upright instead of tipping over on a desk or shelf. The cloud has rounded puffs and a flat underside. The padlock is welded to the front face, so nothing floats or snaps off. The shackle is thick, and the keyhole is cut into the lock body. Cloud: about 100 mm wide, roughly 60 mm tall, 16 mm thick Padlock: 28 mm wide body, 5 mm thick shackle, raised about 7 mm off the cloud Print: flat bottom down, no supports needed, 0.2 mm layers, 3 or more perimeters Single colour, one solid body
TCC 3-Card Display Stand
A rigid, vertical display stand engineered specifically to hold three standard trading cards in penny sleeves. The stand features three independent, straight-drop slots and a commanding 170 mm rear backdrop to frame the collection. What it's for Built to display standard Pokémon or similar trading cards while kept safely inside their penny sleeves. The straight vertical drop ensures the cards sit completely upright without leaning, and the independent grooves keep them evenly spaced across the presentation wall. Dimensions Overall size: 236 mm wide × 50 mm deep × 170 mm tall. Slot dimensions: 70 mm wide × 10 mm deep × 2.4 mm thick (generously sized to slide penny sleeves in and out without binding). Spacing: 8 mm solid dividers between each card slot. Print notes Designed to print exactly as oriented without any supports. The rear braces add structural rigidity to the tall back wall without needing a massive block of filament. The front TCC lettering is modeled as a distinct region, allowing it to be printed easily as a flush colour change or an AMS/MMU paint region.
Sprout — Tapered Planter
Introducing Sprout — a classic, no-nonsense tapered planter designed for robust root health. Built with thick walls and a sturdy top rim, it brings a clean, timeless aesthetic to any shelf or window ledge, ensuring your greenery takes center stage. Dimensions Outer Diameter: 100mm (tapering down to 75mm at the base) Overall Height: 95mm Wall Thickness: 2.5mm Features Drainage Array: Features one central 10mm drain and six 8mm radial drain holes to prevent waterlogging. Reinforced Rim: A 5mm chamfered top lip adds structural rigidity while giving you a solid grip when repotting. Print-Ready: Flat base and smooth taper guarantee a flawless print without supports.
Cursive Home Neon Strip Holder
A cursive "Home" sign form with an open channel running through every letter, made for pressing flexible LED neon strip into place. Fill the channel, wire it up, and the script shape glows like a custom neon sign. Script lettering in a heavy brush style, roughly 80 mm letter height 1.6 mm walls around an open top channel 2 mm floor, 10 mm overall height Prints flat with no supports Print it in white or black depending on how you want the unlit sign to look. Strip width differs between brands, so check the channel width against your strip before printing.
150mm Floral Calavera Lampshade
A wide cylindrical lampshade featuring a repeating cut-through motif of a traditional Mexican sugar skull adorned with floral eye sockets, forehead mandalas, and crowns. The base is engraved with "MEXICO LINDO" along the perimeter. Fit: 150 mm diameter, 180 mm tall. Mounting: 49 mm centered top hole for standard pendant fixtures. Open bottom. Printability: The engraved text at the base leaves a 0.7 mm inner shell, ensuring the centers of letters like 'O' and 'D' remain fully attached while passing light. The skull features are bridged and cut out as contiguous negative space with no floating islands. Walls: 2.2 mm thick, chamfered at the top and bottom edges for a finished look.