DropStop — Laptop Charger Holster
Created today
Description
Keep hefty laptop charger bricks securely anchored and off the floor with the DropStop holster. Designed to prevent heavy chargers from swinging off the desk edge and yanking cables loose, this wall-mounted cradle features a wide-open front. This design exposes the brick's LED indicator and allows for smooth, one-handed removal when taking the laptop on the go.
Features
- Open Faceplate: Provides maximum visibility for the charging LED and allows the brick to be slid out easily.
- Cable Catch: Integrated side rim slots are sized perfectly to loop and secure a 6mm cable, keeping it tidy and eliminating dangle.
- Secure Mounting: Three countersunk screw holes provide a rock-solid anchor to the wall or the side of a desk.
Dimensions
- Engineered for a 70x70x30mm charger brick.
- The internal pocket measures 72x32mm, leaving a comfortable slip fit so the charger doesn't bind.
- Rim slots accommodate 6mm cables.
Images
More like this
Explore more in Desk & Tech →
CoilFlex — USB-C Splint
Meet the CoilFlex — a USB-C strain relief boot that balances rigid stability for the connector head with a flexible, coiled tail for the cable. By applying a helical cut pattern to the tail section while preserving a solid spine at the base, it allows the cable to bend naturally without kinking, while the solid front block keeps the delicate connector joint perfectly immobile. Features Rigid Connector Housing: Perfectly sized to hold the 10mm head section motionless. Spiral Flex-Tail: Allows the cable section to bend under stress without pinching. Snap-In Top: A continuous top channel lets you easily press the cable into place. Tapered Transition: Smoothly steps down from the connector block to the coil.
MagSafe iPhone Desk Stand
This MagSafe desk stand ends the daily annoyance of a phone lying flat on a desk catching glare and demanding two hands to peel away from a charging cord. It angles the screen at 60 degrees for casual checking, leaves plenty of airgap for the heavy camera bumps on modern iPhones, and traps the charging cable permanently in place so it stops sliding off the table. Tolerances and Fit Puck Recess: 56.5mm diameter by 5.7mm deep — dimensioned to grip a bare official Apple MagSafe charger securely. Cable Channel: A 7.5mm wide routed track runs straight down the front face of the arm and channels the cord cleanly under the heavy base plate. Ejection Hole: A 25mm rear bore gives your thumb space to push the charger out when you need to pack it for a trip.
MagSafe iPhone Desk Stand (fixed)
This MagSafe desk stand ends the daily annoyance of a phone lying flat on a desk catching glare and demanding two hands to peel away from a charging cord. It angles the screen at 60 degrees for casual checking, leaves plenty of airgap for the heavy camera bumps on modern iPhones, and traps the charging cable permanently in place so it stops sliding off the table. Tolerances and Fit Puck Recess: 56.5mm diameter by 5.7mm deep — dimensioned to grip a bare official Apple MagSafe charger securely. Cable Channel: A 7.5mm wide routed track runs straight down the front face of the arm and channels the cord cleanly under the heavy base plate. Ejection Hole: A 25mm rear bore gives your thumb space to push the charger out when you need to pack it for a trip.
Print-in-Place Concentric Rings
A set of five concentric rings designed to print in place as a single piece. Excellent as a clearance test for your printer or just a satisfying desk fidget. Remix Hooks This design is built on a few key parameters that are begging to be tweaked depending on what you want to use it for: Wall Thickness: Currently set to 2mm for a solid feel. Clearance: Set to 0.4mm gap between rings. If your printer is finely tuned, drop this to 0.2mm or 0.3mm for tighter tolerances. Height: Currently 8mm, but you can scale this up on the Z-axis to turn them into nesting tubes. Inner Diameter: Starts exactly at 25mm to fit over standard dowels or large fingers.
iBasso DC04 Ultra DAC Sleeve
A functional, flat-printing sleeve for the iBasso DC04 Ultra USB DAC. Built to slide on and stay put, it protects the casing while keeping the screen and jacks clear. Fit: Designed for the DC04 Ultra (58 × 23.4 × 13.2 mm) with built-in clearance. Access: Continuous top window blends the screen opening into the front thumb notch for easy extraction. Ports: Oversized 4.4mm and 3.5mm jack cutouts to clear thick audio cable barrels. Buttons: Single continuous side slot for unobstructed access to the volume and filter controls. Print: Prints flat on its back or front face; no supports required.
Homelab Split 1U Rackmount
This is a 1U rackmount adapter specifically sized to hold a TP-Link ER605 router and an OC200 hardware controller side-by-side. Because standard 19" rack widths don't fit on everyday print beds, the mount is split down the middle into two halves that lock together with a snug puzzle-piece joint. The devices slide directly into the support sleeves from the front. Design notes Sleeve design: The open-topped rear trays print natively without supports when the faceplate is laid flat on the bed. Tolerances: The center dovetail includes a 0.2mm clearance to ensure the two halves slide together cleanly right off the plate. Mounting: Standard 1U oval slots give a bit of wiggle room for cage nuts.