Dual Crossover Enclosure
Created today
Description
A scalable enclosure updated to house two crossover PCBs vertically. Features integrated external mounting tabs for MDF, top-edge ventilation slots for passive cooling, and a reinforced front panel with standard 19mm-spaced 4.5mm holes for banana plug binding posts.
- Internal capacity: 200x170x60mm
- Cooling: 4mm vertical ventilation slots
- Mounting: 4x external tabs with countersunk 4mm screw holes
Images
More like this
Explore more in Storage & Organization →
Vented Power Supply Enclosure
What it's for A custom-sized, two-part vented enclosure designed to hold a 111x79x36mm power supply. It features side-mounted cooling vents, a solid base, and wire-routing holes positioned near the bottom of the narrow end. Dimensions External size: 99 x 131 x 42 mm (main box), plus the flush-fitting lid. Internal space: The central cavity between the corner screw pillars provides a clear 83 x 115 mm footprint, allowing a 2 mm clearance gap on all sides for the 111 x 79 mm power supply unit. Wire routing: Two 7mm diameter holes on the narrow end for cable pass-through. Assembly The lid secures into the four corner pillars using standard M3 screws. The interior features a small alignment lip on the lid to ensure it seats squarely against the posts.
Endgame Robotics Enclosure
A rugged, multi-part enclosure designed for robotic interfaces and smart control nodes. The three-piece split allows easy assembly, with a deep main chassis to house microcontrollers and batteries, capped by a clean windowed bezel and a vented back cover. Front Bezel: Features a recessed touch panel land and tiny microphone breakout holes. Main Chassis: Houses dual text debossing ("END" / "GAME"), structural columns for heat-set inserts, and a USB-C cutout. Back Cover: Includes countersunk M3 mounting holes, an expansion module bay, and a hexagonal vent grille.
Vented Equipment Enclosure Box
What it's for A functional electronics or equipment enclosure featuring an integrated hinged lid, snap latch, and generous ventilation slots. Designed to print easily with the lid flat on the bed alongside the main body. Dimensions Internal capacity: 200 x 200 mm base, 60 mm deep inside Floor: 5 mm thick solid base for structural rigidity Cutouts: A 30 mm circular port on the left wall, and a 12x6 mm rectangular port on the back wall by the hinges. Cooling: Vertical slot vents on the front, left, and back panels. Assembly Once printed, mate the hinge knuckles of the lid to the base. Slide a piece of raw 1.75mm or 3mm filament (or a standard M3 bolt) straight through the hinge line to join them.
Caja sci-fi para ESP32, RCA y driver
Caja para electrónica con ESP32, dos salidas RCA, jack DC hembra y un driver que no entraba cómodo: los conectores de la pared derecha quedaban pegados al driver. Ahora la caja es más larga y hay luz entre ambos. Medida exterior: 132,8 × 60 × 28,8 mm. Separación: unos 26 mm entre los postes del driver y la pared con RCA y jack. Conectores: dos agujeros de 8,2 mm (RCA) y uno de 11,2 mm (jack DC), frente a la ranura USB. Montaje: 4 tornillos M3 en las esquinas; la tapa lleva rejillas y ranuras decorativas. Impresión: base y tapa por separado, sin soportes si se imprime la base apoyada en el fondo.
Magnetic Enclosure Storage Box
A robust two-piece enclosure designed around magnetic closures and standard 100x145x30mm internal storage requirements. Remix Hooks Wall Thickness: Set to 6mm to ensure the 4mm corner magnets have plenty of structural meat on both sides. Registration Lip: The lid features an inset lip with 0.3mm clearance to keep the halves aligned—the magnets just pull it shut, they don't have to fight shear forces. Bottom Magnets: 7mm diameter cutouts are positioned underneath for docking or stacking. Adjust their X/Y offsets if you're matching a specific grid plate.
150mm Borg Friendship Vault
Zak's Borg Friendship Vault. Three-piece print, designed to drop in and seat clean without fasteners. Overall Footprint: 150mm x 150mm. Total Height (Assembled): 145mm. Internal Payload Bore: 65mm diameter x 105mm depth. Cage Windows: 90mm span, designed to bridge flat across the top without support on well-calibrated machines. The top cap runs a 118mm square boss to locate itself on the outer frame, plus a 64.5mm cylindrical plug to lock into the core and prevent horizontal slop. Print the outer cage and cap in black PETG; run the core in fluorescent PLA. Keep your cooling aggressive for the long window bridges.