Ember Drake Charizard Mini Figure
Created today
Description
A miniature Charizard collectible with a smooth rounded head, snout, small horns and green eyes, plus a cream belly that follows the curve of the torso. Two broad blue-green wings sit on the upper back, and a long tapering tail curves up to a red-and-yellow flame.
Design notes
- Wings, arms and tail sit on captive ball joints with 0.35 mm clearance, so they can swivel after printing.
- Legs and feet are fixed to the body, which gives the figure a stable stance.
- Wing membranes are 2.4 mm thick with rounded edges.
- Colour regions: orange body, cream belly, teal wings, green eyes, red flame with a yellow core.
Images
More like this
Explore more in Decor & Display →
Posable Dragon With Friction Joints
A posable toy dragon that holds its pose, with detailing so it doesn't look like a plain chain of balls. The old version looked like a bare stick of linked beads. This one adds belly plates, scale studs and a trimmed base. What's on it Cream belly plates under each body link Dark-red scale studs along both flanks, plus the back spike row Raised gold trim around the edge of the base Same 12 ball-jointed body links and ball-jointed head Print notes 0.2 mm joint clearance: raise it if the joints fuse, lower it if they sag Print in PETG for repeated bending Multi-colour print or paint the belly plates, trim and spikes
14 x 14 x 13 mm Palm Cavity Hand
A stylised hand with the middle finger extended and the other fingers folded, with a square 14 × 14 mm cavity, 13 mm deep, centred in the palm. Fit and check Cavity: 14 × 14 mm opening, 13 mm deep, open on the palm side, blind (does not exit the back of the hand). Palm is 22 mm thick, leaving about 9 mm of material behind the cavity floor. Measure the cavity after printing if a 14 mm part must fit; FDM usually shrinks holes slightly. Not included No reference image was available, so proportions are generic. Fingernail is a small raised plate on the back of the middle finger. It does not show from the palm side. Scaled compact, about 104 mm tall, so it is not life-size.
Mandarin Town — Colorful Community Scene
A bright miniature town for learning Mandarin community vocabulary. Each building carries its name in Chinese, pinyin and English, and every main building has its own wall colour. Signs, a park, a pond, houses, cars and people fill out the scene. Features Hospital, library, community center, store and school, each in a different colour Park with pond, benches and trees, plus a banner reading 一起参加活动 Road with cars, footpaths, lamps and neighbourhood houses Work and Service signs with people at the buildings Dimensions 200 × 200 mm base plate, 4 mm thick
Ember Flame Sculptural Table Lamp
A frozen-flame silhouette in the spirit of mid-century modern ceramics: a wide, flared foot that narrows into a tall neck and opens at the crown into three prongs. A tapered, flame-shaped window shows a separate amber diffuser, so the lamp reads as a contained fire when lit. Hollow terracotta shell with a flat, stable base Open bottom cavity sized for an E26 bulb and socket Side wire port near the foot Separate diffuser printed in translucent amber or yellow filament Print the shell upright; the diffuser prints on its own Use a low-heat LED bulb to keep the plastic safe.
Elipsa
Izduženi ovalni okvir u obliku glatke kontinuirane trake, širine 80 mm, kao elegantna orbita bez ikakvog teksta unutra. Donji luk je širi i izraženiji od ostatka, a cijela traka leži na ploči, bez dijelova koji vise u zraku. Visina gornjeg i bočnog dijela: 0,8 mm Visina donjeg luka: 1,8 mm Širina trake: 2,4 mm, a na donjem luku 3,8 mm Ravna baza, prilagođena FDM štampi
Extruder Figure on Cloud Plate
A printable extruder-style character lying on its back, standing in front of a solid 2 mm cloud plate. The name "Printytron" is raised on the body below the screen and is a separate part, so it can be coloured on its own. Boxy body with a recessed magenta screen showing a face with curved eyebrows and pupil indents Curved arms, thick hands, side box with teal button Hexagonal nozzle with a chunky square collar, flat on the plate Raised Space Mono lettering in its own colour Cloud backing plate whose bottom edge lines up with the hands and nozzle so the print can stand on a desk