Endgame Robotics Enclosure
Created today
Description
A rugged, multi-part enclosure designed for robotic interfaces and smart control nodes. The three-piece split allows easy assembly, with a deep main chassis to house microcontrollers and batteries, capped by a clean windowed bezel and a vented back cover.
- Front Bezel: Features a recessed touch panel land and tiny microphone breakout holes.
- Main Chassis: Houses dual text debossing ("END" / "GAME"), structural columns for heat-set inserts, and a USB-C cutout.
- Back Cover: Includes countersunk M3 mounting holes, an expansion module bay, and a hexagonal vent grille.
Images
More like this
Explore more in Storage & Organization →
150mm Borg Friendship Vault
Zak's Borg Friendship Vault. Three-piece print, designed to drop in and seat clean without fasteners. Overall Footprint: 150mm x 150mm. Total Height (Assembled): 145mm. Internal Payload Bore: 65mm diameter x 105mm depth. Cage Windows: 90mm span, designed to bridge flat across the top without support on well-calibrated machines. The top cap runs a 118mm square boss to locate itself on the outer frame, plus a 64.5mm cylindrical plug to lock into the core and prevent horizontal slop. Print the outer cage and cap in black PETG; run the core in fluorescent PLA. Keep your cooling aggressive for the long window bridges.
Vented Equipment Enclosure Box
What it's for A functional electronics or equipment enclosure featuring an integrated hinged lid, snap latch, and generous ventilation slots. Designed to print easily with the lid flat on the bed alongside the main body. Dimensions Internal capacity: 200 x 200 mm base, 60 mm deep inside Floor: 5 mm thick solid base for structural rigidity Cutouts: A 30 mm circular port on the left wall, and a 12x6 mm rectangular port on the back wall by the hinges. Cooling: Vertical slot vents on the front, left, and back panels. Assembly Once printed, mate the hinge knuckles of the lid to the base. Slide a piece of raw 1.75mm or 3mm filament (or a standard M3 bolt) straight through the hinge line to join them.
Caja sci-fi para ESP32, RCA y driver
Caja para electrónica con ESP32, dos salidas RCA, jack DC hembra y un driver que no entraba cómodo: los conectores de la pared derecha quedaban pegados al driver. Ahora la caja es más larga y hay luz entre ambos. Medida exterior: 132,8 × 60 × 28,8 mm. Separación: unos 26 mm entre los postes del driver y la pared con RCA y jack. Conectores: dos agujeros de 8,2 mm (RCA) y uno de 11,2 mm (jack DC), frente a la ranura USB. Montaje: 4 tornillos M3 en las esquinas; la tapa lleva rejillas y ranuras decorativas. Impresión: base y tapa por separado, sin soportes si se imprime la base apoyada en el fondo.
Magnetic Enclosure Storage Box
A robust two-piece enclosure designed around magnetic closures and standard 100x145x30mm internal storage requirements. Remix Hooks Wall Thickness: Set to 6mm to ensure the 4mm corner magnets have plenty of structural meat on both sides. Registration Lip: The lid features an inset lip with 0.3mm clearance to keep the halves aligned—the magnets just pull it shut, they don't have to fight shear forces. Bottom Magnets: 7mm diameter cutouts are positioned underneath for docking or stacking. Adjust their X/Y offsets if you're matching a specific grid plate.
VoltGrid — Print-in-Place Battery Case
A high-capacity, print-in-place storage case holding 104 AA batteries in a skeletal, material-saving grid. Designed specifically for FDM printing without supports. Features Zero Assembly: Prints flat with a fully integrated, captive 45-degree cone hinge mechanism. Just pop it off the bed and fold it closed. Skeletal Organizer: The lower grid provides 0.4 mm of clearance for 14.5 mm diameter AA batteries, but uses open walls to drastically cut filament usage and print time compared to solid block designs. Snap Latch: A flexible cantilever tab locks the lid securely down over a heavy chamfered ledge on the bottom box. Dimensions Flat Printing Footprint: 228 mm × 292 mm Closed Dimensions: 228 mm (W) × 142 mm (D) × 60 mm (H) Capacity: 104 cells (13 × 8 grid)
104-Cell AA Battery Vault
This heavy-duty grid vault keeps 104 AA cells locked down and separated. The front closure uses a single wide flex-arm cantilever built straight into the lid. It swings down to snap automatically over a retaining ledge on the base, holding the lid firmly shut until you pull the finger grip outward. Clearance: 0.4 mm gap on all latch and hinge mechanisms Lid Mechanism: Print-in-place folded hinge Print Layout: Prints fully open and flat on the bed