Faceted 80mm LED Tealight Lantern
Created today
Description
A faceted 80mm cube lantern designed to slip over a standard LED tea light. The outer shell features a repeating triangular lattice that casts geometric light patterns on surrounding surfaces, providing mood lighting without an open flame.
- Dimensions: 80 x 80 x 80 mm overall footprint with heavy chamfered edges.
- Fitment: Features a 39.5 mm bottom recess to comfortably clear standard 38 mm LED tea lights.
- Printability: All triangular apertures are oriented apex-up to act as self-supporting overhangs, requiring zero support material during printing.
- Safety: Designed exclusively for use with battery-operated LED units; not suitable for real flames.
Images
More like this
Explore more in Decor & Display →
Basic Geometric Ziggurat
What it's for A 6th-grade style Mesopotamian ziggurat model made from bold, basic geometric shapes. The structure relies on simple stacked cubes for the main tiers, a chunky 6-step staircase to represent a grand ramp, and a classic triangular roof capping the top shrine. Dimensions Base Tier: 100 × 100 mm Total Height: 85 mm (including the new roof) Staircase: 6 large blocks, extending 60 mm outward from the center. Print notes This model is built flat to the plate and requires zero supports. The large geometric shapes make it a very fast, reliable print in any standard filament.
Helix — Open-Frame Twisted Fin Lamp Shade
Helix is a flared lamp shade with no solid wall. 72 thin fins spiral through a 60° twist as the shade widens from the base to the top, and three low reinforcing rings hold the whole frame together. The result reads like a lantern or woven cage, and the light comes through as spiralling slats of shadow. The fins and rings are matched on purpose: each fin reaches inward only as far as the rings do, so the inner edge stays clean from bottom to top. A small spoked fitter ring at the base seats the shade over a lamp holder. Dimensions Height: 130 mm Base diameter: about 90 mm Top diameter: about 140 mm Twist: 60° over the full height Features 72 twisted, flared fins, 1.2 mm thick Three low-profile rings at the bottom, middle and top, 3.5 mm tall Fin depth matched to the ring depth (about 6.6 mm at the base, scaling with the flare) Spoked fitter ring at the base, 3 mm tall Print notes Print upright with the fitter ring on the plate. Slow speeds help, since the fins are thin. Use a cool LED bulb only. Fit to a specific socket is untested, so check the fitter ring against your holder.
Cartel Currency Stack
A solid brick of unapologetic paper wealth, banded together for easy transport. Modeled after the footprint of standard US currency, this thick stack makes a perfect paperweight, a prop for your next heist short film, or a heavy-duty desk flex. Bank Notes Dimensions: Roughly 156mm × 66mm — true to a standard dollar bill footprint. Printability: Sits flat on the build plate. No supports required. Customization: Swap filament colors at the 20.5mm mark to make the strap and the dollar sign pop against the stack.
Aerocord — Wire Heart Frame
A smooth, continuous 10mm tubular loop mathematically traced into a classic heart shape, scaled to a full 20cm span. Ideal as a minimalist wall piece, a wreath frame, or a standalone desk feature. Dimensions Width: 200 mm Cord Diameter: 10 mm Overall Profile: Sits flat with a 10 mm Z-height Features Continuous Sweep: A closed tubular loop with no hard joints. Classic Proportions: Driven by standard parametric heart equations for a familiar, balanced shape. Ready to Print: Sits perfectly flat on the bed, requiring zero supports.
FLAGE MAROCAINE
A precisely dimensioned 180x120mm base for a Moroccan flag assembly. The model features an accurate 1mm-deep recess carved as five intersecting straight lines, capturing the true geometry of the traditional interlaced pentagram. Through-holes at the five intersecting tips provide exact alignment for a matching drop-in star, while doubling as push-out points if the star needs to be removed after test-fitting. Specifications Dimensions: 180 mm x 120 mm x 3 mm Recess Depth: 1.0 mm (maintains a 2 mm solid floor) Alignment: Five 2.4 mm diameter positioning through-holes Print Settings: Prints flat on its back; no supports required
iPad Picture Frame Adapter Rödlam 21x30
A two-part adapter plate that centers a 5th Generation iPad (9.7") inside an IKEA RÖDALM frame. It acts as a solid backing spacer, locking the tablet into the frame body while providing a cutout exactly the size of the active screen. The split design fits on a standard 220mm print bed and joins with simple flat printed tabs, avoiding overhangs entirely. Remixing and Adjustments Screen Cutout: Currently set to 197 × 148 mm. If you swap to an iPad with a different bezel ratio, you can adjust these dimensions to crop it cleanly. Frame Depth: The total block depth is 30 mm. Thinner frames will require cutting down the outer block height. Cable Routing: A 16 × 25 mm rear channel provides plenty of clearance for bulky aftermarket Lightning cables. Joints: Uses simple 11 × 14 mm rectangular biscuits. You can easily scale these or add more pairs for extra rigidity depending on your printer's tolerances.