Foldable Snap-Fit Phone Stand
Created today
Description
A rugged, fully printable foldable phone stand. It is printed in three flat pieces that snap together securely, allowing it to fold completely flat for travel.
Features
- Adjustable Angles: Features 7 resting notches on the base plate to precisely control the screen angle.
- Snap-Fit Hinges: Uses C-clip snap joints that grip firmly onto 6mm pins without requiring any extra hardware.
- Travel-Ready: Folds down to a flat profile when not in use.
Print Instructions
Print flat on the bed as oriented. Standard PLA or PETG works perfectly. Ensure good bed adhesion for the flat plates. The snap-fit hinges are designed with a 0.4mm clearance — they will require a firm push to snap into place during assembly, but will hold tight thereafter.
Images
More like this
Explore more in Desk & Tech →
Hexa — Modular Hex Phone Stand
Hexa is a one-piece phone stand built on an 80 mm hexagonal base, designed so identical modules can click together side by side with no hardware. A 70° back panel supports the phone, a front lip stops it sliding, and a groove keeps the charging cable tidy. Features Hexagon 80 mm across vertices, 6 mm thick, rounded edges Back panel about 65 mm tall, leaning at 70° from the base Front lip 10 mm above the base surface Cable groove running front to back, centred Dovetail tab on one side edge, matching slot on the opposite edge (0.3 mm clearance) Print notes Print flat on the base, no supports needed PLA or PETG, 3–4 perimeters for strength
Modular Hexagon Phone Stand
A modern, modular phone stand built around a pure hexagonal base. The design allows multiple units to link together sideways via a built-in tab and slot system, perfect for keeping a row of devices organized on a desk or creating an expanding charging station. Design Highlights: 70-Degree Rest: The back support leans back comfortably for viewing notifications or media. Cable Management: A central pass-through routes your charging cable securely out the bottom via hidden channels. Print-in-Place Linkage: Built-in puzzle-piece connections require no extra hardware to link modules. Split Front Lip: Keeps the device firmly seated while leaving the center clear for downward cable runs.
Modular Hexagonal Phone Stand
What it's for A single-piece modular phone stand designed around a regular hexagonal footprint. It features an angled 70-degree backrest for optimal viewing and a sturdy front retaining lip. A central U-groove is carved through the front lip and into the base, allowing a charging cable to pass cleanly underneath the phone while docked. The stand is designed to tile: dovetail tabs on the right side match with identical slots on the left side, allowing multiple hexagonal units to be linked together into a continuous charging array or desk organizer without any extra hardware. Dimensions Base size: 80 mm across opposite vertices, sitting 6 mm thick. Back panel: 65 mm tall, leaning back at a 20-degree angle from vertical. Front lip: 10 mm high above the resting surface, leaving a generous 23 mm gap for the device. Cable groove: 12 mm wide, recessing down to a 2 mm floor height. Print notes Designed to print entirely support-free in its default upright orientation. The 0.2 mm clearance on the dovetail joints should slide together firmly on a well-calibrated machine. Standard PLA or PETG will provide plenty of strength for the upright panels.
A-Frame Mobile Stand
A sturdy, functional stand for phones and small tablets. Designed with a 35-degree viewing angle, it works nicely for watching media or keeping an eye on notifications while at your desk. Features a 16mm-wide cutout for routing charging cables Includes a solid rear spine to prevent flexing when tapping the screen 14mm resting gap accommodates most phones, even with a case Prints in one piece without supports
Vertical Arc Reactor Speaker Stand
What it's for A vertical, upright stand designed to hold an Echo Dot 3rd Gen while transforming it into a glowing reactor core. The custom cavity is deep enough to cover the sides of the device entirely, leaving only the top surface and the signature light ring visible from the front. A bottom channel allows the power cable to route straight down seamlessly. Dimensions Base: 120 × 100 mm footprint for vertical stability. Speaker Cavity: 101.5 mm diameter, 44 mm depth (tailor-made to enclose the puck). Overall Height: ~150 mm. Print notes Orientation: Prints best as oriented. Ensure your bridging settings are dialed in for the speaker cavity and the rear acoustics hole. Supports: You may want light supports under the bottom edge of the ring and inside the cable channel, depending on your printer's overhang capabilities. Assembly: Slide the Echo Dot in from the front, route the barrel plug up through the bottom slot, and plug it in.
Reactor Core Echo Stand
This stand pitches your 3rd Gen Echo Dot on its side to make it the glowing core of a Mark I Arc Reactor. The base features a U-shaped drop-in pocket sized perfectly for the Dot — it slides right in from the top with the cable attached, seating securely behind the front bezel. The front face frames the bottom edge of the device, turning its status light into the reactor's ring. Core Features Drop-in Dock: Fully open top channel and rear cable slot let you drop the Dot in without unplugging it. Reactor Bezel: Oversized front ring complete with ten staggered copper-style cooling coils. Embossed Text: The iconic 'PROOF THAT TONY STARK HAS A HEART' circles the top arc of the bezel. Cable Management: Rear cutout safely clears the bulky power adapter plug, and the hollowed base lets you run cables beneath.