Handheld-Gehäuse 255×130 mm, Unterschale 46 mm
Created today
Description
Zweiteiliges Handheld-Gehäuse 255 × 130 mm für eine selbstgebaute Konsole, mit herausnehmbarer Anschlussblende für die 100 × 30 mm große Kabel- und USB-Öffnung in der Rückwand.
Maße zum Prüfen
- Unterschale: 46 mm von Boden bis Oberkante, Wandstärke 3 mm
- Oberschale: 12 mm hoch
- Display-Fenster: 155 × 87 mm, Modulaufnahme für 166 × 100 mm
- Tastenlöcher: 7,2 mm
- Klipp-Platte: Außenrand 104 × 34 mm, Einsatz 99,6 × 29,6 mm
Passt nicht
- Display-Module, die größer als 166 × 100 mm sind
- Andere Rückwand-Aussparungen als 100 × 30 mm
Vor dem Druck die Modulmaße des eigenen Displays gegenmessen. Schalen offen nach oben, Platte flach, ohne Stützen druckbar.
Images
More like this
Explore more in Decor & Display →
Glatte Ballhalterung 130 mm
Eine stabile Halterung für Bälle mit 130 mm Durchmesser. Die Auflagefläche ist glatt und halboffen, sodass der Ball sicher sitzt und leicht entnommen werden kann. Passform: 130 mm (13 cm) Durchmesser Auflage: Glatte, U-förmige Schale ohne Stopper Struktur: Runder Standfuß mit massiven, geschwungenen Stützen
SMG-11 — Red Dot Machine Pistol Replica
SMG-11 is a life-size, non-functional display replica of the compact machine pistol from Rainbow Six Siege, built in the MAC-11 pattern. The magazine is a separate piece that slides out of a real well in the grip, and a rail-mounted red dot sight sits on top. Features Removable magazine with baseplate, feed lips, catch notch and witness holes Grip with mag well, side texturing, mag release button, trigger and trigger guard Boxy receiver with ejection port, side serrations, safety lever and front sling loop Grooved barrel with muzzle ring Top rail with cross slots, front sight with ears and cocking knob Red dot sight with housing, turrets, battery cap, lens and dot Open wire stock Print notes Overall length is about 280 mm with the stock, so it needs a large bed or splitting into sections. Print the magazine separately, baseplate down. The well has about 0.3 mm clearance per side. Wire stock rods may need supports. Display piece only; it has no working mechanism.
Givvy Display Logo
A thick, rounded "GIVVY" logo designed specifically for multi-color FDM printing (AMS/MMU). The text features a solid aqua centre surrounded by a continuous purple outline that merges the letters into a single, cohesive piece. Scaled perfectly for mounting onto a trading-card display stand. Dimensions: ~94 mm wide, ~31 mm high, and 3.2 mm thick. Format: Co-planar separate regions for the centre and outline, allowing easy assignment of different filaments in your slicer. Mounting: Perfectly flat back for flush gluing to display stands or frames.
Cloud Security Padlock Desk Ornament
A cloud-shaped ornament with a padlock raised on the front, so the cloud-security symbol sits flat and upright instead of tipping over on a desk or shelf. The cloud has rounded puffs and a flat underside. The padlock is welded to the front face, so nothing floats or snaps off. The shackle is thick, and the keyhole is cut into the lock body. Cloud: about 100 mm wide, roughly 60 mm tall, 16 mm thick Padlock: 28 mm wide body, 5 mm thick shackle, raised about 7 mm off the cloud Print: flat bottom down, no supports needed, 0.2 mm layers, 3 or more perimeters Single colour, one solid body
witek1
A three-disk stacked cylinder, the standard database symbol, as a desk ornament or sign element. Disks are 50 mm across and 14 mm tall with 3 mm grooves, joined by a 42 mm core, and a thin cap sits on top. Remix hooks Disk count (n = 3): raise it for a taller stack, or drop to 2 for a compact version. Groove gap (3 mm): widen it for stronger shadow lines, or set it to 0 for a solid can. Diameter (50 mm) and disk height (14 mm): scale both for a keychain or a coaster-sized piece. Pairs with: a flat base plate with a label, or a magnet pocket in the bottom for a fridge version.
Class III Cranial Armor Dome
Standard infantry cranial armor. Mates with a standard adult human neck ring. Fitment Specs Internal Bore: 178mm wide by 220mm deep. Check your cranium measurements before attempting integration. Mating Surface: Flat bottom Z-plane, intended for a Class III pressure collar. Clearance: If your species has protruding mandibles or horns, this block will not clear. Do not force fit. Machined from heavy geometric stock. You want "highly detailed, game asset" textures, you'll need to hit it with a weathering wash yourself. I just build the plating so it deflects plasma.