Heavy-Duty Screwdriver Wall Rack
Created 15 days ago
Description
A solid, heavy-duty wall-mountable rack designed to hold five large screwdrivers vertically. Built to maintain a sturdy grip on hefty tool handles while keeping the mounting hardware completely separate from the tool shafts.
Features:
- Accommodates 5 screwdrivers
- Wide handle cups (28mm) for heavy-duty tools
- Generous clearance between tool sockets and mounting holes
- Chamfered front and edges for a clean look
- Counterbored mounting holes for standard wood screws
Images
More like this
Explore more in Workshop & Tools →
Hilti Nuron Battery Bracket v3
What it's for A heavy-duty, wall-mounted slide bracket engineered specifically for Hilti Nuron battery packs. Designed to mount vertically, it features precision-cut clearance channels and flared 45-degree entry ramps for blind sliding, backed by a solid stop block to prevent bottoming out. Four reinforced, deep-countersunk screw channels ensure the mount stays locked to the wall regardless of the battery weight. Dimensions Overall footprint: 107 mm length × ~93 mm width × 23.5 mm depth. Internal track: 61.5 mm outer track width, 51.5 mm inner neck clearance. Mounting: 4× countersunk screw holes (5.5 mm shaft, 13.5 mm head, 5 mm deep sink). Print notes Recommend rigid, high-strength materials like PETG or ABS to handle the repeated friction and weight of the Nuron packs. Print face up with the flat back resting completely against the bed. Clearances are set to exact measurements, so a well-tuned printer is necessary to keep the slide rails from binding.
no clip Hilti nuron v3
Screws mounted inside the track usually mean the battery casing drags across the screw heads if they don't sit perfectly flush. Moving the mounting holes to the solid outer flanges gets the hardware entirely out of the sliding path and stops the bracket from rocking when you yank a heavy pack out. Width: Pushed out to 94mm to give the screws enough meat to bite into. Clearance: 15mm deep counterbores hide the screw heads in the outer body, leaving a solid 5mm base to clamp against the wall.
M18 Battery Mount
A wall- or bench-mountable receiver designed to hold a Milwaukee M18 battery. The block features an internal track that matches the battery's rails, allowing it to slide into place securely. Interface: Female slide-track (receives the battery) Mounting: 4x countersunk holes sized for #8 or #10 screws Orientation: Includes an internal stop at the back so the battery rests securely when mounted vertically
Attila Custom Wall Brush
A classic flat wall brush profile, completely customizable for your shop or prop box. It prints as a solid piece, designed to be dropped flat on its back in the slicer so the text and profile print cleanly without supports. Remix Hooks The Text: Currently running a 1.25mm deboss. If you change the font, watch the spacing and depth. The Handle: Sized at 35x14mm with a heavy 6.5mm round-over for comfort. You can scale the Z-height for a longer beaver-tail handle. The Ferrule: Features triple 1.2mm crimp grooves for that authentic hardware-store look.
Tapered Scissor Belt Holster
A streamlined, rigid hard-plastic holster designed for holding professional scissors or shears vertically on a belt. Features an exact 20 mm top width with a subtle taper down to a flat reinforced bottom. Fully enclosed internal cavity accommodates 10 mm shears with integrated anti-rattle ribs. Single-piece print includes a heavy-duty 45-degree support-free belt hook. Flush embossed "Druckbereich" branding on the front plate.
small Bottle Syringe Clip
A custom-sized double ring designed to couple a 14.5 mm syringe to a 31 mm bottle neck. Syringe bore: 14.5 mm with an 8 mm front insertion slot Bottle bore: 31 mm (snaps on via a 22 mm back slot) Clearance: 4 mm bridge spacing The branding is now recessed 0.6 mm directly into the bottle ring's inner wall, keeping the outer profile completely flush. Check your syringe outer barrel measurement before running this.