Heavy-Duty Strap Tension Lock
Created 1 months ago
Description
A heavy-duty tension lock (tri-glide slider) sized perfectly for standard 50mm (2-inch) nylon webbing. This single-piece buckle uses a reinforced and raised center bar to ensure high friction, keeping straps tightly locked under load.
Key Features
- Perfect Fit: 51mm internal width to give thick duty straps just enough clearance.
- Aggressive Grip: Three raised cylindrical ridges span the center bar to bite into the woven nylon and prevent slow slipping.
- Heavy-Duty Walls: 6mm thick external walls and a 9mm tall command bar mean this won't snap under tension.
- No Support Required: Prints entirely flat on the build plate.
Images
More like this
Explore more in Workshop & Tools →
Stud-Saddle Drop Shelf
A heavy-duty drop shelf designed to wrap a standard 2x4 wall stud. The main bed splits into two pieces for easy printing on a standard bed, locking together with precision alignment dowels. A central support leg drops down directly into a face-mounted stud bracket to hold heavy loads flat. No-Support Printing: The main plates are oriented perfectly flat off the bed. Locked-In Support: The drop leg features a tubular bottom that seats perfectly into a cupped bottom bracket, preventing lateral slip. Hardware Needed: A few 6mm rod pins for the hinges, and standard countersunk wood screws for the brackets.
Heavy-Duty C-Bracket
A straightforward C-shaped bracket or spacer profile, built flat for easy printing and structural strength. Perfect as a spacing jig, edge clamp base, or structural tie. Remix Hooks Thickness (10 mm): The defining parameter. Bump it to 12 mm or 15 mm if you need stiffness for heavier loads. Notch Depth (65 mm): Dictates how deep the bracket bites. Edge Treatment: Currently sharp for exact alignments, but easily chamfered if you'll be handling it frequently. Mounting: Ripe for adding countersunk bolt holes through the 25 mm tabs.
Machined-Style NPT Blow Gun Nozzle v4
An air compressor adapter designed to interface a 1/4" NPT blow gun with a precise 3mm outer-diameter nozzle. The part features a clean, support-free geometry that steps inward as it prints, transitioning smoothly from a 14mm hex base up through the threads, capping off with a reinforced 1mm fillet at the base of the delicate tip. Print and Application Notes Print Orientation: Prints exactly as oriented (hex base flat on the bed). No supports are required for the threads, ceiling, or nozzle. Sealing: The threads are rendered straight rather than tapered—wrap with a couple of layers of PTFE thread tape to ensure a tight pneumatic seal when threading into the metal gun. Material: PETG or ABS is highly recommended over PLA to handle the pressure spikes and avoid brittleness at the tiny 1mm bore tip.
Wall Mount Screwdriver Storage Rack
Loose screwdrivers rolling around on the workbench or buried in a drawer waste time every time a quick adjustment is needed. This wall-mounted screwdriver rack keeps six tools organized, visible, and instantly accessible right above the workspace. Designed with graduated hole sizes to accommodate everything from heavy stubby drivers down to precision tools, with front drop-in slots for smaller drivers. The back features integrated keyhole slots for clean, flush mounting onto shop walls or pegboards using standard pan-head screws. Specifications & Print Settings Overall Dimensions: 210 mm wide × 50 mm deep × 35 mm high Tool Hole Diameters: 11 mm, 10 mm, 9 mm, 8 mm, 7 mm, and 6 mm Mounting Interface: Dual keyhole slots spaced 140 mm apart (fits #8 / M4 pan-head screws) Orientation: Prints flat on its base without supports
90° Bevel Gearbox Assembly
A fully functional 90-degree bevel gearbox connecting an 8mm hex shaft to a 5mm hex shaft. The robust L-shaped housing is split cleanly down the center for easy, support-free printing and simple assembly. Specifications Transmission: 1:1 ratio bevel gears (16 teeth, 90-degree mesh). Input/Output: Built-in 8mm and 5mm hex bores, oversized by 0.2mm to accommodate standard FDM tolerances. Mounting Interfaces: Four 4.3mm clearance holes on each face flange, arranged in a 25mm square pattern. Assembly: The housing halves are clamped together automatically when bolted to a surface using the face flanges; an extra M3 hole in the rear corner provides optional tightening. All pieces print flat without supports.
Detailer's Triptych Vacuum Set
A custom trio of detailing tools designed specifically for the standard 35mm friction-fit wands found on most Karcher wet/dry workshop vacuums. Each piece serves a distinct stage of an automotive deep clean. The set features: The Crevice Tool (Red): Extended and sharply angled to slip between seats and center consoles. The Wide Nozzle (Blue): Flared to 80mm with a shallow scraping edge, ideal for lifting stubborn dirt from floor mats and broad upholstery. The Detailing Spot Nozzle (Green): Narrowly focused into a 16mm tip for intense, localized suction inside cup holders, vents, and door pockets. Designed to print without supports—just drop them on the bed vertically.