Insert Numéro Cœur 100mm
Created 1 months ago
Description
Plaque numérotée en forme de cœur, intégrant un chiffre en typographie pixel (Press Start 2P). Conçue comme insert plat pour les centres de table.
Spécifications de montage :
- Largeur hors-tout : 100 mm
- Épaisseur de la base : 3 mm (mesure critique pour l'insertion dans un porte-carte)
- Épaisseurs des reliefs : Bordure de 2 mm, chiffre de 2.5 mm
- Compatibilité : Nécessite un chevalet standard, une pince ou une fente rainurée de 3.2 mm minimum dans votre support de table. Ne tient pas debout seule.
Images
More like this
Explore more in Gifts, Seasonal & Personalized →
Magic octagon coin.
An octagon coin whose raised arrow disappears into the bed side: the underside is now flat with the arrow cut in as a shallow dent, so no layer prints over empty air. Size: 50 mm across corners, 3 mm body, 4.2 mm total height. Top: 0.6 mm raised rim, with the arrow rising 1.2 mm so it stands 0.6 mm above the rim. Change filament at that layer to colour only the arrow. Underside: flat, with a 0.6 mm deep arrow indentation turned 90° from the top arrow, plus a 1.4 mm wide, 0.6 mm deep groove about 2 mm in from the edge. Print: lie it flat, underside on the bed, no supports.
Luggage Strap Tag, 5 mm Slot, STEVE
A 90 × 50 × 3 mm luggage tag with a 5 × 22 mm strap slot and the name STEVE raised inside a recessed label panel. Fitment Fits straps up to 5 mm thick through the 22 mm-wide slot. Does not fit wide or double-layer straps, or standard key rings without a loop. Measure the strap thickness before printing; the slot is 5 mm. The lettering stands 0.9 mm proud of the panel floor and sits below the tag's top surface, so it is protected from rubbing.
Raised-Text Visitor Pass 110x70 mm
A 110 × 70 mm single-piece visitor pass for Himalaya Public Sr. Sec. School, with a 2 mm base plate and bold text raised 0.8 mm above it. The three centred lines read HIMALAYA PUBLIC, SR. SEC. SCHOOL and VISITOR PASS. Plate: 110 × 70 mm, 2 mm thick, rounded corners, flat bottom Text: 0.8 mm raised, fused to the plate Total thickness: 2.8 mm Single colour, no supports needed Text size unchanged from the previous version
Single-Colour Raised Text Visitor Pass
A 110 × 70 mm visitor pass with a 1.2 mm plate and bold raised lettering standing 0.6 mm proud, 1.8 mm total. It prints flat-side down in one colour with no supports. Remix hooks Text sizes: 6.5 mm for the school lines and 7.5 mm for VISITOR PASS. Raise them for a bolder look, but keep 4 mm of edge clearance. Plate thickness: 1.2 mm. Thicker gives a stiffer card, though the total height rises with it. Relief height: 0.6 mm. Match it to your layer height, for example 3 layers at 0.2 mm. Pairs with: a lanyard slot or clip tab added at one end.
V2_Aşkım Love Letter Photo Frame
Ein winziger Bilderrahmen im Stil einer Liebeskarte: Der Name „Aşkım" thront als erhabene Schrift über dem Rahmen, auf der Rückseite wartet eine versteckte Botschaft samt großem Herz. Außenmaß 52 × 52 × 1,5 mm, Fach für ein 50 × 50 mm Foto Rückwand 0,6 mm, geschlossen Name 4 mm hoch in Arial-ähnlicher Schrift (Liberation Sans) Unterseite: Widmungstext und Herz, 0,25 mm tief graviert (lesbar von hinten)
Mike Wazowski Horns for Shirt
Two horns to sew onto a maternity shirt for a Mike Wazowski costume. A loose horn flops or slides off fabric, so each one has a flat round base with sewing holes to stitch it down. Key numbers Height: about 47 mm each Base: 40 mm round disc, 3 mm thick Six 3.2 mm sewing holes around each base Print: base flat on the bed, no supports needed, cream or white filament