Description
Jeton de caddie à porter au porte-clés : un disque robuste avec une oreille percée pour l'anneau, et un léger creux sur une face pour coller une pastille ou une étiquette.
Dimensions
- Disque : Ø 24 mm, épaisseur 2,4 mm
- Oreille : Ø 12 mm, trou de Ø 5 mm
- Creux : Ø 18 mm, profondeur 0,8 mm
Impression
- À plat, sans supports
- PLA ou PETG, 3 périmètres conseillés
Images
More like this
Explore more in Keychains & EDC →
60mm Keyring Carabiner Clip
A 60x30mm print-in-place compliant carabiner designed to interface with standard split-ring keychains and lightweight everyday carry items. The frame features a 5mm constant cross-section with alternating triangular truss cuts along the spine to reduce material weight without compromising the hinge action. Fitment and Tolerances Clearance: The interlocking latch mechanism relies on a 0.4mm printed gap. Ensure flow rate and horizontal expansion are calibrated to prevent the gate from fusing to the catch. Hardware: Accepts standard flat or wire keyrings up to 4mm in thickness through the inner loop. Incompatibilities: This is a decorative thermoplastic clip for keys and pocket tools. It is strictly non-load-bearing. Do not use for climbing, rigging, securing heavy equipment, or any life-safety applications.
TurnAssist — T-Bar Key Grip
Introducing TurnAssist, a heavy-duty T-bar grip engineered to bring real leverage to stiff locks. Designed specifically for individuals dealing with weak or arthritic hands, it transforms a standard house key into a robust, easy-to-grasp handle. The key secures firmly into the 3mm slot using a standard 1.75mm filament snippet as a locking pin. Features High-Torque Geometry: Configured to be printed flat on the build plate. This aligns the layer lines perpendicular to the turning force, ensuring the handle won't shear under pressure. Flush Pin Clamping: The locking pin passage is counterbored. Filament only needs to be threaded through the center, and snipped ends stay fully recessed to prevent scratching. Accessible Profile: The 60mm wide, 20mm thick crossbar provides a comfortable and secure resting surface for the palm and fingers.
Chaîne articulée de 40 maillons clipsables
Une chaîne imprimée d'un bloc se désassemble au moindre effort, et une chaîne trop courte ne sert à rien. Cette version aligne 40 petits maillons à rotule, à clipser à la main pour obtenir une chaîne d'environ 190 mm. Chaque maillon a une rotule d'un côté et une douille à quatre pétales de l'autre. Les pétales plient au passage de la rotule puis se referment, ce qui laisse la chaîne se plier dans toutes les directions et se démonter sans outil. Chiffres utiles Largeur d'un maillon : 4,6 mm Pas entre maillons : 4,8 mm Longueur assemblée : environ 190 mm (40 maillons) Jeu théorique : 0,15 mm par côté, à ajuster selon l'imprimante Impression : maillons à plat, en deux colonnes de 20, sans supports Matériau conseillé : PETG, plus tolérant que le PLA pour les pétales fins Buse 0,4 mm, hauteur de couche 0,12 à 0,16 mm
Fluier Cochilie Spiralată
Un fluier cu siluetă de cochilie de mare: camera rotundă poartă o nervură în spirală, iar muștiucul scurt iese în față ca un cioc. Aerul trece printr-un canal îngust, lovește muchia ascuțită din fereastră și face camera să sune. Cameră de rezonanță cilindrică, închisă Inel pentru breloc în spate Nervura spiralată se poate imprima într-o altă culoare Se printează culcat, fără suporturi; stratul de 0,2 mm dă un sunet curat
Fidget
What it's for A fully print-in-place fidget roller inspired by continuous-motion hand toys. It features two heavily grooved outer cylinders captured on a rigid internal frame. Built to be rolled continuously in one hand to keep fingers busy. Dimensions Overall size: 37 mm wide, 63 mm tall, 22 mm deep. Rollers: 22 mm diameter, 50 mm tall with 20 scalloped grip grooves. Clearance: Designed with a 0.5 mm gap top, bottom, and radially around the axles for a free spin immediately off the build plate. Print notes Prints completely vertically without supports. The top frame link is designed with a flat bottom to bridge cleanly across the two internal axles without adhering to the rollers beneath it. Once finished, a firm twist breaks any minor stringing and frees the rollers.
Micro Print-in-Place Joystick
This is a print-in-place ball joint that acts as a miniature thumb joystick. The entire assembly prints as one welded-together block with an internal 0.4 mm gap; once it's off the build plate, a firm snap frees the stick to rotate and swivel in the base. It is designed to be as small as FDM printers can reliably manage without snapping the stalk.