Kids fairy wings
Created 1 months ago
Description
Kids costume
Photos
Technical views
More like this
Explore more in Gifts, Seasonal & Personalized →
Kids Fidget Board with Spinner
A fidget board for small hands: a base with a three-lobe spinner and a sliding button in a track. Printed as five separate pieces, so nothing fuses and no supports are needed. Base: 70 × 36 mm with a spinner pocket, a fixed axle and a through slot with an underside recess. Spinner: prints flat, drops over the axle with 0.7 mm clearance per side. Axle cap: glues onto the peg at the top of the axle to hold the spinner on. Slider button: prints flat with the stem pointing up. The stem passes through the slot. Retaining foot: glues onto the stem underneath, inside the recess, so the button slides but cannot lift out. Assemble in this order: spinner, then cap; button stem through the slot, then foot glued on. Use glue suited to the filament, and check that glued parts are fully secure before giving the toy to a young child.
5mm Bore Snowman Ornament
5mm bore snowman plate. Replaces flimsy universal-fit ornaments with a rigid, one-piece PLA blank. The main body prints completely flat at a 3.5mm maximum depth, maintaining a minimum structural web of 2.5mm throughout. Check the hanger fitment before printing: Accepts standard 4mm wire hooks Clears bare natural spruce tips up to 4.5mm thick Does not fit 1/4" wood dowel branches on artificial trees Overall envelope is 65mm x 80mm. No supports required.
Stylized Snowflake Bell Ornament
A solid, flat-backed Christmas bell ornament designed for straightforward FDM printing. The model combines a traditional flared silhouette with a top bow and an integrated hanging ring. Dimensions: 60 mm wide, 70 mm tall, 3.5 mm total thickness. Structural Base: 2.5 mm thick plate to ensure durability. Surface Details: A raised 1.5 mm border, a central geometric snowflake pattern, and layered bow geometry elevated to the full 3.5 mm height. Mounting: Features a clean 5 mm diameter hole in the top ring for string or wire hangers. Prints completely flat on the bed with no supports required. Ideal for PLA or PETG.
45mm Cat Top Hat
A scaled-down top hat designed to sit between a cat's ears. The crown is hollowed out to minimize weight, and the brim features integrated loops to secure an elastic chin strap. Brim: 45mm diameter Height: 30mm overall Mounting: Twin 4mm holes for standard elastic cord Printability: Prints flat on the brim with no supports required; internal roof is a short 22mm bridge.
Grab Pack Prop Set
What it's for A wearable grab pack costume prop designed for a 9-year-old. Includes the main backpack unit with integrated strap loops, plus two separate grabber arms ending in wide, open-palmed four-finger hands. Dimensions Backpack: 250 mm total width across the outer spools, designed to sit flat against the wearer's back. Strap loops: 35 mm internal clearance, sized to easily accept standard 1.5-inch webbing. Hands: Approximately 120 mm across the splayed fingers, giving a large cartoonish footprint. Print notes The backpack body prints as a single solid piece with the spools attached. The launcher arms and hands are separate bodies designed to print completely flat on the bed for maximum strength and zero supports. Paint them up or string actual colored wire between the backpack spools and the arm hubs to complete the rig.
Insert Numéro Cœur 100mm
Plaque numérotée en forme de cœur, intégrant un chiffre en typographie pixel (Press Start 2P). Conçue comme insert plat pour les centres de table. Spécifications de montage : Largeur hors-tout : 100 mm Épaisseur de la base : 3 mm (mesure critique pour l'insertion dans un porte-carte) Épaisseurs des reliefs : Bordure de 2 mm, chiffre de 2.5 mm Compatibilité : Nécessite un chevalet standard, une pince ou une fente rainurée de 3.2 mm minimum dans votre support de table. Ne tient pas debout seule.