Klipper Display and Status Console
Created today
Remixed once
Description
Compact left-side mounting enclosure for Klipper printer telemetry, designed specifically for the Ender 3 Pro 2040 vertical extrusion.
- Hardware Compatibility: Fits a 1602A I2C LCD, a 32x32mm HW-109 MAX7219 LED Matrix, and a standard 5mm RGB LED.
- Internal Clearance: 36mm cavity depth cleanly clears standard I2C backpacks.
- Mounting System: Left-oriented 5mm side flange using dual slots for M4 t-nuts. Flange sits flush to the bottom, leaving top clearance for gantry travel.
- Assembly: Snap-fit 2mm front panel with internal screw bosses; back plate secured via four M3 interior corners.
The housing prioritises rigidity and short wiring paths over bulk, anchoring firmly without compromising structural frame limits.
Images
More like this
Explore more in Workshop & Tools →
Klipper Telemetry Console
A compact enclosure for Klipper printer telemetry, mounting to standard 2040 extrusion. This version features revised back cover mounts that embed securely into the enclosure walls, ensuring robust assembly. Revised Mounts: Structural corner blocks anchor the back plate safely to the frame. Component Fits: Room for a 1602A LCD and 32x32mm MAX7219 matrix. Mounting: Flush side flange with M4 t-nut clearance.
Uchwyt latarki Dragon HT05
Wsuwany boczny uchwyt do hełmu strażackiego Dragon HT05, przystosowany do latarek typu Iskra LED. Zaprojektowany jako jeden zwarty element. Zaczepy do modyfikacji Obejma latarki: Otwór ma 30 mm, a szerokość wcięcia wynosi 72% tej wartości (dobry zatrzask dla materiałów takich jak PETG). Szyna montażowa: Standardowo profil 25 mm na 4.5 mm, z drobną sferyczną wypustką do wyczuwalnego zablokowania w slocie hełmu. Orientacja: Model w całości zorientowany jest tak, by leżeć płasko na stole – nie używaj tu podpór, wydrukuje się gładko w jednym przejściu osi Z.
5-Way Flat H-Manifold
What it's for A flat pneumatic or fluid splitter featuring five branches. Arranged in an H-configuration with an additional trailing branch, keeping the entire assembly planar for simple routing and straightforward printing. Dimensions Branch outer diameter: 10 mm Branch inner diameter: 7 mm (1.5 mm walls) Overall length: 50 mm (from the closed cap to the tail tip) Overall width: 40 mm (across the parallel arms) Spacing: 25 mm between the two cross sections Print notes Lays entirely flat on the print bed. The horizontal pipes print safely without supports on most standard FDM setups.
Clay Cutter with Pressing Rim
A sharp clay cutter that won't dig into your hand when you press down. The cutting edge is shaped to print cleanly with a standard 0.4 mm nozzle, dropping to a precise two-perimeter thickness at the tip. Internal diameter: 100 mm Overall height: 10 mm Tip thickness: 0.8 mm (tapered on the outside only) Pressing rim: 6 mm wide with a rounded upper edge for comfort Prints exactly as oriented, no supports needed.
Empreinte Éventail Rayonnant 50mm
Matrice d'empreinte rigide reproduisant la géométrie d'un éventail ouvert. Conçue pour marquer l'argile, la cire ou d'autres pâtes malléables, la pièce est construite sur un plan de référence plat garantissant une pression uniforme. Le motif est généré par un réseau radial de nervures profilées, sans contre-dépouilles, pour assurer un retrait propre du matériau embouti. Dimensions hors-tout : Hauteur de 50 mm, ouverture de 140 degrés. Épaisseur de base : 3 mm (socle rigide). Motif : 13 nervures coniques s'évasant vers l'extérieur, arrêtées 2 mm avant la bordure pour garantir une marge nette. Démoulage : Les arêtes extérieures sont adoucies et les nervures présentent un profil elliptique aplati (mise en dépouille) évitant l'arrachement de la matière. Tirage : Aucun support requis, fond parfaitement plat adapté au plateau de l'imprimante.
Screw-On Large-Hole Spool Holder
A plate-mounted spool holder for filament spools with large central holes. A hollow 48 mm spindle rises from a flat mounting plate and ends in a flared lip that keeps the spool from sliding off. Remix hooks Spindle diameter (48 mm): change to suit your spool bore; most big-hole spools measure 50–58 mm, so leave 2–4 mm of play. Spindle length (70 mm): stretch for wide spools, shorten for slim ones. Plate (110 × 64 × 6 mm): screw holes sit 44 mm either side of centre, 4.5 mm with countersinks. Move them to match your panel, or add a third hole. Lip: 58 mm with a 45° underside so it prints without supports. Make it a removable cap for easy spool swaps. Wall (3 mm): thicken for heavy 3 kg spools, or add ribs. Prints plate-down with the spindle pointing up. Mount with the plate against a vertical panel so the spindle points sideways; a pair stacks well for dual spools.