Kristallkugel auf Podest mit Öse
Created today
Description
What it's for
Wahrsager-Kristallkugel im klassischen Kinderzeichnungs-Stil: glatte Kugel auf einem gestuften Podest, in einem Stück gedruckt. Die Öse oben erlaubt zusätzlich das Aufhängen an Angelschnur.
Dimensions
- Kugel: Ø 100 mm, hohl, Wand 2,4 mm
- Podest: Fuß Ø 110 mm, Gesamthöhe bis Kugelsitz 30 mm
- Gesamthöhe ca. 115 mm, passt auf eine 180×180-mm-Platte
- Schnurloch: Ø 3,5 mm
Remix ideas
- Sterne oder Mondsymbole in den Podestfuß prägen
- Öse entfernen für reine Standversion
- Kugel größer oder Podest höher skalieren
Images
More like this
Explore more in Decor & Display →
Halloween Gravestone Trophy V5
A Halloween trophy gravestone that prints as separate pieces, because a single-colour solid block makes white lettering and a skull impossible. The black stone and pedestal print in black PLA. The skull, webs, bats, cross and lettering print in white PLA and plug into sockets in the stone, so nothing relies on glue alone for position. Numbers that decide fit Assembled size: about 160 mm tall, 90 mm wide, 35 mm deep (pedestal 90 × 35 × 22 mm; stone 80 × 18 mm, arch radius 40 mm). Stone-to-pedestal joint: two rectangular tenons, 8 × 10 mm and 12 mm long, at offset positions so the stone only goes in one way. Pedestal holes are 8.5 × 10.5 mm and 14 mm deep, leaving 2 mm of glue space. Small parts: 2.8 mm pegs, 4 mm long, with chamfered tips. Sockets are 3.1 mm wide and 5 mm deep. Lettering: three word plates (BEST VILLAIN, HALLOWEEN NIGHT, WROCŁAW • 24.10.2026). Each has a 1.2 mm backing plate that sits in a recess, letters raised 1.8 mm and two pegs. Surface: chipped edges and cracks are modelled into the stone. Printing Stone: print it back-down, flat. Pedestal: print it upside-down or bottom-down. No supports are needed for either. White parts: print the lettering face-down, with the pegs pointing up. Print the skull, webs, bats and cross back-down. The model includes an assembled view and an exploded view. Each white part sits on its own socket pattern. Assembly: fit the tenons into the pedestal, glue them, then press each white piece into its sockets and glue.
Halloween Gravestone Trophy V4
A Halloween trophy gravestone that prints as separate pieces, because a single-colour solid block makes white lettering and a skull impossible. The black stone and pedestal print in black PLA. The skull, webs, bats, cross and lettering print in white PLA and plug into sockets in the stone, so nothing relies on glue alone for position. Numbers that decide fit Assembled size: about 160 mm tall, 90 mm wide, 35 mm deep (pedestal 90 × 35 × 22 mm; stone 80 × 18 mm, arch radius 40 mm). Stone-to-pedestal joint: two rectangular tenons, 8 × 10 mm and 12 mm long, at offset positions so the stone only goes in one way. Pedestal holes are 8.5 × 10.5 mm and 14 mm deep, leaving 2 mm of glue space. Small parts: 2.8 mm pegs, 4 mm long, with chamfered tips. Sockets are 3.1 mm wide and 5 mm deep. Lettering: three word plates (BEST VILLAIN, HALLOWEEN NIGHT, WROCŁAW • 24.10.2026). Each has a 1.2 mm backing plate that sits in a recess, letters raised 1.8 mm and two pegs. Surface: chipped edges and cracks are modelled into the stone. Printing Stone: print it back-down, flat. Pedestal: print it upside-down or bottom-down. No supports are needed for either. White parts: print the lettering face-down, with the pegs pointing up. Print the skull, webs, bats and cross back-down. The model includes an assembled view and an exploded view. Each white part sits on its own socket pattern. Assembly: fit the tenons into the pedestal, glue them, then press each white piece into its sockets and glue.
Halloween Gravestone Trophy, Glue-Together Kit
A Halloween trophy gravestone that prints as separate pieces, because a single-colour solid block makes white lettering and a skull impossible. The black stone and pedestal print in black PLA. The skull, webs, bats, cross and lettering print in white PLA and plug into sockets in the stone, so nothing relies on glue alone for position. Numbers that decide fit Assembled size: about 160 mm tall, 90 mm wide, 35 mm deep (pedestal 90 × 35 × 22 mm; stone 80 × 18 mm, arch radius 40 mm). Stone-to-pedestal joint: two rectangular tenons, 8 × 10 mm and 12 mm long, at offset positions so the stone only goes in one way. Pedestal holes are 8.5 × 10.5 mm and 14 mm deep, leaving 2 mm of glue space. Small parts: 2.8 mm pegs, 4 mm long, with chamfered tips. Sockets are 3.1 mm wide and 5 mm deep. Lettering: three word plates (BEST VILLAIN, HALLOWEEN NIGHT, WROCŁAW • 24.10.2026). Each has a 1.2 mm backing plate that sits in a recess, letters raised 1.8 mm and two pegs. Surface: chipped edges and cracks are modelled into the stone. Printing Stone: print it back-down, flat. Pedestal: print it upside-down or bottom-down. No supports are needed for either. White parts: print the lettering face-down, with the pegs pointing up. Print the skull, webs, bats and cross back-down. The model includes an assembled view and an exploded view. Each white part sits on its own socket pattern. Assembly: fit the tenons into the pedestal, glue them, then press each white piece into its sockets and glue.
Sonderkerzen 1.2
What it's for Vier hohle Kerzenkörper in abgestuften Höhen mit Wachstropfen-Optik. Der Boden ist per Bajonettverschluss abnehmbar. Kleine Rastnasen im Verriegelungsschlitz lassen den Verschluss spürbar einrasten, damit er sich nicht versehentlich löst. Dimensions Höhen: 110, 105, 100 und 95 mm Außendurchmesser 45 mm, Innendurchmesser 37 mm Teilung 25 mm vom Boden Vier 1-mm-Löcher, 16 mm unter dem oberen Rand Remix ideas Rastnase höher oder niedriger für mehr oder weniger Haltekraft Andere Höhenstufen Weitere Tropfenmuster
100mm Stylized Mouse Figurine
A 100mm desktop figurine featuring recognizable cartoon proportions, stylized volumetric geometry, and a multi-part colored structure optimized for modern 3D printers. The geometry merges a classic pear-shaped body with a thick, structural lightning-bolt tail and posed limbs. Multi-Color Support: Explicit part separation mapped to yellow, black, red, brown, and pink regions, ready for assignment in multi-material slicers. Printability: Features a mathematically leveled Z=0 base under the feet, reinforced overhangs, and thickened elements to eliminate brittle failure points in FDM. Dimensions: Scaled specifically to 100mm from plate to the highest ear tip.
Blank Scroll With Handles
A medieval-style blank scroll stretched between two wooden rods. The parchment features tight spiral rolls on either side and a slightly worn, ragged edge along the top and bottom. The wooden handles extend past the paper and cap off with classic rounded finials. Features: Central Area: Smooth and perfectly flat, left completely blank for custom text or decals. Worn Edges: Subtle distressed cutouts along the top and bottom of the parchment. Sturdy Rollers: Symmetrical wooden shafts with spherical knobs anchoring both ends. Designed to print flat without supports.